Spot Removers - American Niagara

A N C 

AMERICAN NIAGARA 

STAIN REMOVERS & More AT A GLANCE 

SOLD THROUGH A HIGHLY TRAINED NETWORK OF DISTRIBUTORS 

OFFERING A FULL RANGE OF INVENTORIES IN OVER 30 COUNTRIES 

ON THE FLOOR & READY TO SHIP TODAY! 

R E C O V E R O F F - Q U A L I T Y! 

Scotty 

Barocas 

President 

Please contact me personally 

for current pricing and the 

name of your nearest dealer 

scott@american-niagara.com 

If you want to become a dealer 

or importer, some areas may 

still be available. If not, it is 

possible to be set-up through 

our existing dealers as a “subdealer”. 

Contact me to swap 

further facts. 

2009 

6690 Jones Mill Court • Building A&B • Norcross, Georgia 30092 USA 

Nearest Dealer • Technical Questions • Samples • MSDS 

Phone 770-441-5900 • Fax 770-409-7259 • 800-241-7708 

www.american-niagara.com • e-mail scott@american-niagara.com 

.....thank you for allowing us to serve your special needs since 1971 

before & after 

...got a second? 

our customers don’t!

PULL-OUT2 

STAIN REMOVER 

Powdered Stain-Lifter for Fabrics & Textiles 

REMOVES: • CIRCLES & RINGS • GREASE • SOIL • OIL 

TO REMOVE A "RING" OR "GREASE", OIL STAINS 

STEP 1 / APPLY PULL OUT TO FABRIC STAINS AFTER THE FABRIC HAS 

BEEN TREATED WITH A SPOTTING SOLVENT - AND, A CIRCLE OR RING IS 

LEFT IN THE FABRIC. BE SURE THE STAIN IS COMPLETELY DRY OF 

CLEANING SOLVENT BEFORE APPLYING PULL OUT POWDER. 

STEP 2 / THEN, WITH AN AIR GUN, GENTLY BLOW TREATED AREA UNTIL 

A WHITE, CRUSTY POWDER APPEARS. FINALLY, BLOW OUT WITH FULL 

BURST OF AIR. STAINED AREA SHOULD NOW BE COMPLETELY 

CLEANED. IF NECESSARY, REPEAT PROCESS. 

PACKAGING: 12-20 FLUID OZ. CANS/CASE / NET WT. 17 OZ PER CAN 

108 CASES PER PALLET • 1,500 CASES 20' • 2,500 CASES 40' 

LIST PRICING IS PUBLISHED ON THE INTERNET 

FREIGHT: FOB / EX-WORKS NORCROSS, GEORGIA 30092 USA 

WEB SITE: WWW.AMERICAN-NIAGARA.COM 

DEALER PRICING, MSDS, AVAILABLE TERRITORIES 

C ON TA C T S: 

Scott Barocas, President 


A N C 


BEFORE AFTER 

CALL FOR 

QUANTITY DISCOUNTS 

DEALERS IN 30 COUNTRIES 


Phone 770-441-5900 • Fax 770-409-7259 • 800-241-7708 

www.american-niagara.com • e-mail: scott@american-niagara.com 

2

Pull-Out 

tm 

Premium 

• AT LAST! A non-chlorinated solvent aerosol 

spotter that removes “RINGS” as well as 

"GREASE" and "OIL" stains that appear in 

fabrics during the cut & sew process. Used by 

garment mills, retail stores, embroiderers, textile 

mills, screen printers and many industries! 

• DOES NOT CONTAIN CHLORINATED SOLVENTS 

• DOES NOT CONTAIN "PERC" 

• DOES NOT CONTAIN "METHLYENE CHLORIDE" 

• DOES NOT CONTAIN "TRICHLOROETHYLENE" 

• LOWER IN TOXICITY 

• ENVIRONMENTALLY ACCEPTABLE 

• IMPACTS YOUR "BOTTOM-LINE" PROFITS 

• ECONOMICAL • VERY FAST DRYER 

• Spray on to “dry” fabric - gently blow to powder with 

air - then, simply blow out or brush off harmless 

powdery residue. 

VIEW VIDEO at www.american-niagara.com and scroll down to PULL-OUT PREMIUM video! 

A N C 



Phone 770-441-5900 • Fax 770-409-7259 • 800-241-7708 


3

SPOT CLEANING STATIONS 

#80 Workhorse 

SPOTTING STATION 

BUILT-IN SPRAY GUN FOR 

STAINS VERY POWERFUL 

EXHAUST UNIT 110 VOLT • 60 

CYCLE AC 35 LBS. 

#2000 Air-Devil 

SPOTTING STATION 

2 BUILT-IN AIR/FLUID GUNS FOR 

STAIN REMOVAL. VERY POWERFUL 

EXHAUST UNIT 220 VOLT • 60 

CYCLE AC 

•EVERY POSSIBLE OPTION 

• DRY CLEANING GRADE 

MYSTIC tm TEXTILE CLEANING GUNS 

#01B 

#1 SELLER, AS PICTURED. 

FEATURES ADJUSTABLE 

NOZZLE. SAME GREAT GUN 

AS THE #01A. THE MOST 

TRUSTED SPRAY GUN ON 

THE MARKET! 

#01A - ALL MYSTIC GUNS ARE BASICALLY THE 

SAME UNITS WITH DIFFERENT OPTION PACKAGES. 

THE #01A IS THE STANDARD UNIT. IT IS THE SECOND 

BEST SELLER AND SHOULD BE USED BY TEXTILE 

MILLS, ETC., WHERE AN ADJUSTABLE NOZZLE IS NOT 

MANDATORY. 

#01C - EQUIPPED WITH ADJUSTABLE 

NOZZLE AND AIR ATTACHMENT FOR FAST 

DRYING OF FABRICS. 

#01D - EQUIPPED WITH ADJUSTABLE 

NOZZLE AND DIRECT FEED UNIT FOR 

DISPENSING FROM CONTAINER. 

#01E - EQUIPPED WITH ADJUSTABLE 

NOZZLE, DIRECT FEED UNIT FOR 

DISPENSING FROM CONTAINER AND AN 

AIR ATTACHMENT. ALL THE WHISTLES! 

4

M.C.-250 or 

TRIPLE BLEND 

ALL PURPOSE SPOTTING SOLVENT 

SOLVENT BASED 

• NON-FLAMMABLE 

• PREMIUM BLEND 

• NON V.O.C. 

• NON OZONE DEPLETOR 

• VERY FAST DRYING 

Removes grease, soil & oil stains from any 

type of fabric. Our #1 selling stain remover. 

Also removes plastisol ink stains. 55 gal; 5 

gal; 4-1 gal. 

kwik-kleen(99 or 200) 

SPOT REMOVER (liquid) 

SOLVENT BASED 

• VERY FAST DRYER 

• FLAMMABLE BLEND 

• BUDGET PRICED 

GREAT SPOT CLEANER! Does not contain 1,1,1 

tri, nor methylene chloride. Low toxicitY. 55 gal; 

5 gal; 4-1 gal. 

RING ON THE 

GARMENT AFTER THE 

USE OF A SOLVENT SPOT 

REMOVER? 

PULL-OUT #2 

OR 

PULL-OUT 

PREMIUM 

CA N SAVE Y OUR BUSINESS LIFE 

BECA USE IT REMOVES THOSE 

COSTLY RINGS.. AN ABSOLUTE MUST FOR 

EVERY FACTORY! 

STAIN-B-GONE 

AEROSOL SPRAY (solvent) 

Contains trichloroethylene. Very pow erful 

spot remover. Used w hen a spray gun is not 

available. Non-flammable formulation. Very 

fast dryer. one dozen-20 fluid oz. cans/case 

#257-WN 

SPOT CLEANING BRUSH 

• Stiff Nylon Bristle • Wood Handle 

• Imperv ious to solv ents • Very High Quality 

• Economical • Very Low Cost 

This is a “must” for a ny cleaning operation 

10 inch wood block with 1 5/8 wide x 3 inch 

long brush face and 5/8 inch trim 

Packaged: 12 per case 

SPOT REMOVERS 

(LIQUIDS • AEROSOLS) 

ENVIRO-SOLV 2001 

CONTAINS NORMAL PROPYL BROMIDE 

SOLVENT BASED 

• SOLD THROUGH DISTRIBUTORS 



• HMIS CODE 1-0-0 

Replaces everything on the market for removing 

grease, soil & oil stains. 55 gal; 5 gal; 4-1 gal. 

AEROSOL SPOTTERS • PRE-SPOTTERS 

COFFEE-GO 

PRE-SPOTTER (liquid) TEA & TANNIN REMOVER 

Removes tough tannin stains from fabrics. Flush 

out w ith solvent through spray gun for best 

results. one dozen-17 fluid oz. bottles/case 

JUICE-OUT 

PRE-SPOTTER (liquid) FRUIT JUICE REMOVER 

Non-Solvent based juice remover. Also an 

excellent pre-spotter for many types of food 

stains. Biodegradable. Non-Toxic. Non- 

Flammable. Each bottle equipped w ith 

directional tip. 

one dozen-16 fluid oz. bottles/ 

RUSTAWAY 

PRE-SPOTTER (liquids {2}) 

Contains H.F. Acid. Sold as a kit. This chemical 

is sold in a package that is equipped w ith an 8 

oz. bottle of remover and a 32 oz. bottle of 

neutralizer. Place one drop on "rust" stained 

fabric and rust w ill instantly disappear. Then, 

pour neutralizer onto stained area to prevent 

potential skin burns. 

RUSTBUST 

PRE-SPOTTER (liquid) 

WATER BASED RUST REMOVER 

Apply a few drops onto rust stained fabric. 

Work in w ith a brush. Then blow out residue 

w ith a solvent through a spray gun. Replaces 

harsh acids.one dozen-16 fluid oz. bottles/case 

EN-ZYME 

PRE-SPOTTER (liquid) FOOD STAIN REMOVER 

Apply a few drops to fabric then brush in and 

w atch the food based stain loosen up. Then, 

w ith a cleaning gun, spray out residue. one 

dozen-16 fluid oz. cans/case 

OMNI-BLEND 

(SPECIAL or #2) 

SPOT REMOVER 

SOLVENT BASED 

• REMOVES FABRIC STAINS 

• REMOVES PLASTISOL INK 


• NON-FLAMMABLE 

Does not contain methylene chloride 

55 gal; 5 gal; 4-1 gal. 

WORKHORSE 

SPOT REMOVER (liquid) 

SOLVENT BASED 

O D O R L E S S...NO SMELL! 

• SLOWER DRYER 

(USE WITH #80 WORKHORSE STATION) 

• COMBUSTIBLE BLEND 

• BUDGET PRICED 

GREAT SPOT CLEANER! Does not contain 

1,1,1 tri, nor methylene chloride. 

Low toxicitY. 55 gal; 5 gal; 4-1 gal. 

INK-ERAD 


INK REMOVER SOLVENT 

Blend of Ketones. Does not 

contain methylene chloride. 

Flammable Blend. Chemically 

reacts to ink stains. 

Apply to stain. Brush in. 

Blow out residue through 

spray gun. one dozen-16 

fluid oz. bottles/case 

AWESOME 


INK REMOVER 

Non-Solvent based ink remover and 

general purpose spotter. No w arnings 

on label. Biodegradable. Non-Toxic. 

Non-Flammable. Each bottle equipped 

w ith directional tip. 

one dozen-16 fluid oz. bottles/case 

BLOOD-GO 


BLOOD REMOVER 

Removes blood stains from farbric 

w ithout soaking. Put a few drops on 

fabric, then, brush in, then, remove 

residue w ith solvent through aspray 

gun. Non-Flammable. Biodegradable. 

Safe to use.one dozen-16 fluid oz. 

bottles/case 

FUSING MACHINE 

CLEANER 

TEXTILE GRADE 

HEAVY DUTY 

16 OUNCE SIZE CAN 

SILICONE SPRAY 

TEXTILE GRADE 

REALLY SLICK STUFF 

16 OUNCE SIZE CAN 

5

V 

E 

R 

Y 

F 

A 

S 

T 

D 

R 

Y 

E 

R 

M.C.-250 

Premium Grade Solvent Blend 

POWERFUL STAIN REMOVER 

• CONTAINS VIRGIN CHLORINATED SOLVENTS 

• REMOVES INK, GREASE, SOIL, OIL, LATEX, ETC. 

• REMOVES CURED PLASTISOL INKS 

• REMOVES MOST NON-FOOD STAINS FROM FABRIC 

• 100% NON-FLAMMABLE 

• CHLORINATED SOLVENT ODOR 

• TOXICITY - MAINTAIN BELOW T.L.V. 


• DOES NOT REQUIRE AIR TESTING OUTSIDE U.S.A. 

PACK & SHIPMENT INFORMATION: 

• 55 GALLON DRUMS • 5 GALLON PAILS • 4-1 GALLON CASES 

Methylene chloride (dichloromethane) 75-09-2; 

Perchloroethylene (tetrachloroethylene) 127-18-4 

*note-special inhibiting package is not included because it is less than 1% of the 

formulation; non-hazardous ingredients are not listed as they are trade secrets ac cording 

to 29CFR1910.1200. A lso contains 1,2 butylene oxide and nitromethane less than 1% 

HMIS (saf ety cod e 1-4) 

HEALTH 2 • FLAMMABILITY 1 • REACTIVITY 0 • PERSONAL PROTECTION B 

COMPONENTS (in ert an d n on-hazard ous componen ts are not subject to reporting an d are 

consid ered as trad e secrets) 

OMNI-BLEND #2 

Premium Grade Solvent Blend 

TEXTILE STAIN REMOVER 

• CONTAINS VIRGIN TCE (UNCUT/HIGH GRADE) 

• REMOVES GREASE, SOIL, OIL, GLUE, LATEX, ETC. 

• REMOVES CURED PLASTISOL INKS 


• 100% NON-FLAMMABLE 

• TYPICAL SOLVENT ODOR 



• DOES NOT REQUIRE AIR TESTING 

• DOES NOT REQUIRE EMPLOYEE MONITORING 

Lab Protective Equip: 

GOGGLES & SHIELD; LAB 

COAT & APRON; VENT 

HOOD; PROPER GLOVES 

Storage Color Code: Blue 

(Health) 

tm 

6 

3 

1 

0 

2 

2 

1 

0 

B

BIG, BIG 

NEWS 

kwik-kleen 

Economy Grade Solvent Blend 

TEXTILE STAIN REMOVER 

• CONTAINS VIRGIN HIGH GRADE SOLVENTS 

• REMOVES GREASE, SOIL, OIL STAINS 


• FLAMMABLE BLEND 

• LIGHT SOLVENT ODOR 



• DOES NOT REQUIRE AIR TESTING 

PACK & SHIPMENT INFORMATION: 

• 55 GALLON DRUMS • 5 GALLON PAILS • 4-1 GALLON CASES 

HMIS (safety code 1-4) 

HEALTH 1 • FLAMMABILITY 3 

REACTIVITY 0 • PERSONAL PROTECTION B 

COMPONENTS (inert and non-hazardous components are not subject 

to reporting and are considered as trade secrets) 

n-hexane 110-54-3;2-methylpentane 107-83-5; 3-methylpentane 96-14-0; 2,3 

dimethylbutane 79-29-8; 2,2 dimethylbutane 75-83-2; isopropanol 67-63-2; 

methylcyclohexane 108-87-2; n-Heptane 142-82-5 

INTRODUCING NEW CHEMISTRY 

SPOT REMOVER SOLVENTS 

ENVIRO-SOLVTM 

some darn good news (for a change)! 

Companies have been desparately seeking acceptable replacments as stain 

removers for use in the textile, screen printing, sewing, knitting and related industries. 

Many of you did not want to perform air samplings nor to monitor 

employees over a 20 year period. 

The chemicals in question were: methylene chloride; perchloroethylene; 1,1,1 

trichloroethane; toluene; HCFC-141b and a host of others. 

Well folks, science once again prevails! Introducing the "new chemistry" 

of textile stain removal solvents ( great for a host of other applications).. 

We started with 1-Bromopropane and 1,2-Epoxybutane and 2-methyl-2propanol 

and Dimethoxymethane and 2 propanol and developed a whole 

new range of highly effective, yet environmentally sound and user 

friendly cleaners. 

STANDARD PACKAGING 

• 55 GALLON DRUMS • 6 GALLON PAILS • 4 GALLON CASES 

• ALL ORDERS SHIPPING POINT • CALL FOR QUOTES ON QUANTITY DISCOUNTS 

• AVAILABLE IN MANY FOREIGN COUNTRIES 

tm 

1 

3 

0 

B 

2 

0 

0 

2 

7

NEW 

FOR 08 

55 Gallon Drum 

5 Gallon Pail 

4-1 Gallon Case 

fob - Atlanta, GA USA 

Call for large quantity quotes 

kwik-kleen 200 tm 

Fast Drying, High Powered Textile Stain Remover Solvent Blend for Fabric 

PRODUCT SPECIFICATIONS 

• Does not contain n-HEXANE 

• Does not contain methylene chloride 

• Does not contain perchloroethylene 

• Removes grease, soil and oily based stains 

• Light odor 

• Low in toxicity 

• Safer to use in the plant than chlorinated solvents 

• Non-Ozone depleting 

• Does not require any air-sampling 

• Dispensable through a textile cleaning gun 

• Fumes can safely be vented through an exhaust system 

• No negative environmental risk 

• Dries very quickly 

This products cleans of all types of textile oriented stains such as grease, soil, oil, 

etc., from fabrics, garments, yarns, carpets, etc. The only trade-off is flammability 

- big deal! 

To find a dealer, swap further facts, review an MSDS, discuss quantity pricing or 

obtain a FREE sample container. 

HMIS (safety code 1-4) 

HEALTH 1 • FLAMMABILITY 3 

REACTIVITY 0 • PERSONAL PROTECTION B 

COMPONENTS (inert and non-hazardous 

components are not subject to reporting and 

are considered as trade secrets) 

Active Ingredient CAS No Percent 

Hazardous 

Heptane 142-82-5 85 - 90% Yes 

Methylcyclopentane 96-37-7 3- 9 % Yes 

n-heptane, dipropyl methane, gettysolve-C, 

heptyl hydride Molecular formula: C 7 H 16 

CAUTIONS: Flammable Blend; Use in well 

ventilated areas; Keep away from Children; 

Keep away from heat and welding arcs as well 

as open flames. 

UN# 1206 

GROUP II CONTAINS 

HEPTANE(S) 

Hazard Class 3.2 

HEALTH 

1 

FIRE 


DIV. APPAREL SOURCING GROUP, INC. 

6690 JONES MILL COURT • BLDG A&B • NORCROSS, GA 30092 

PHONE: (770) 441-5900 • FAX (770) 409-7240 OR 7259 

TOLL FREE 1-800-241-7708 

E-MAIL: SCOTT@AMERICAN-NIAGARA.COM 

WEB SITE: WWW.AMERICAN-NIAGARA.COM 

3 

H 

REACTIVITY 

0 

PROTECTION 

8 

HAZARD RATING 

4-EXTREME 

3-HIGH 

2-MODERATE 

1-SLIGHT 

0-INSIGNIIFICANT

STAIN•B•GONE 

SOLVENT BASED STAIN REMOVER 

•POWERFUL SOLVENT •FAST DRYING •NON-FLAMMABLE •NON-OZONE 

DEPLETING • NET WT. 20 OZ. (1LB. 4 OZ.) • CAN SIZE 20 OZ. • 567 GRAMS 

DESCRIPTION 

THIS PRODUCT IS A DEPENDABLE MEANS FOR QUICKLY REMOVING STAINS SUCH AS 

GREASE, SOIL, OIL, TAR, GRIME, GUNK, CRAYON, LIPSTICK, SHOE POLISH, BUTTER, 

AND CARBON PAPER FROM VARIOUS TYPES OF FABRICS ON MATTRESSES, 

DRAPES, GARMENTS, AND CARPETING. 

DIRECTIONS 

KEEP ACTUATOR POINTED TOWARDS DOT ON VALVE CUP. CHECK COLOR 

FASTNESS OF MATERIAL BEFORE USING. WHEN A SPOT OR STAIN IS DRY; 

SPRAY LIBERALLY OVER STAINED AREA. ALLOW TO STAND FOR A MINUTE. 

THEN PLACE A FOLDED PAPER TOWEL OVER THE SPOT AND ABSORB SPOT 

BY PRESSING DOWN WITH FOOT OR HAND. IF YOU HAVE COMPRESSED AIR 

AVAILABLE, SIMPLY SPRAY ON AND AIR DRY. BRUSH IN IF NECESSARY. 

OMNI-BLEND 

ALSO AVAILABLE IN 5 

GALLON PAILS AND 55 

GALLON DRUMS UNDER 

Mattresses and furniture can 

become stained while in 

storage, on the floor or on 

delivery. Stain-B-Gone tm 

removes the stain...on the spot! 

Refer to MSDS (Material Safety Data Sheet) prior to use. 

A N C 

We cleaned the area right in 

the middle of the stain to 

illustrate the effects of using 

Stain-B-Gone tm . 



Phone 770-441-5900 • Fax 770-409-7259 • 800-241-7708 


9

Introducing the finest Needle Oil and General Purpose Textile Oil on the Market. This product is NOT 

CHEAPENED with Mineral Spirits or any other chemical. It is 100% Pure - Guaranteed! 

SUPER-KLEER #22 

Needle Oil • Sewing Machine Oil • Machinery Oil • Water White • Non-Staining 

PRODUCT DESCRIPTION 

SUPER-KLEER #22 is a highly refined, high viscosity index, mineral oil that gives excellent lubricating 

performance where rust, oxidation and/or high bearing and gear loading are not problems. Unsurpassed 

as a textile needle oil, it is not cut with any low grade diluents. 

Applications 

• Textile Needle OIl and general purpse textile oil where high stndards necessitate 

• Light Duty Hydraulic Systems 

• Plain and Anti-Friction bearings 

• Spur, helical and bevel gears operating under moderate loads 

• Machine Oil Equipment Features / Benefits 

• good water separation 

• very good oxidation resistance 

Gravity, 0 API 33.5 

Viscosity: 

@40 0 C,cSt 11.5-14.1 

@100 0 C,cSt 3.10 typ 

Viscosity Index 78 

Flash Point, COC 0 F 350 

Pour Point, 0 F 117 f 

Composition 

% Saturates 99.0 

For information on the safe handling and use of this product, refer to its Material Safety Data Sheet. 

Visit www.american-niagara.com, or call 770-441-5900 for all of your service needs. 

A N C 


TOLL FREE USA: 1-800-241-7708 

PHONE: 770-441-5900 INTERNATIONAL 

FAX: 770-409-7259 OR 770-409-7240 

w ebsite: w w w .american-niagara.com • e-mail address: scott@american-niagara.com 

6690 Jones Mill Court • Bldg. A&B • Norcross, GA 30092 USA 

• Scott Barocas scott@american-niagara.com 

.....thank you for allowing us to serve your special needs since 1971 

10

PLATINUM 

• Unsurpassed Quality • Realistic Pricing 

• VOC Compliant 

MIST SPRAY 200 

ALL PURPOSE SPRAY ADHESIVE 

‘VOC COMPLIANT’ 

Ideal for 

Screen Printers • Garment Plants 

THIS VERSATILE MULTI-PURPOSE ADHESIVE 

IS HIGHLY EFFECTIVE AS A “FLASH” ADHESIVE 

• FAST TACK, QUICK ADHESION 

• REPOSITIONABLE 

• NON-STAINING • HIGH SOLIDS 

• NON-OZONE DEPLETING 

• IDEAL FOR LABELING 

Questions? Or for the name 

of your nearest dealer. 

1-800-241-7708 

USES 

AN ABSOLUTE “MUST USE PRODUCT” FOR SCREEN PRINTING APPLICATIONS WHERE A STRONG BOND 

OFFERING MULTIPLE FABRIC PULLS IS MANDATORY. ALSO, WORKS GREAT AS AN ALL PURPOSE GLUE. HI- 

TEMP, GREAT FOR FLASH CURE. USED BY CUT & SEW OPERATIONS. 

• LITERALLY THOUSANDS OF USES! 

DIRECTIONS 

SHAKE CAN. AIM DIRECTIONAL TIP AT SURFACE. 

SCREEN PRINTING: AS A PALLET OR PLATEN, AIM AT A DISTANCE OF 6 TO 12 INCHES. SPRAY IN A 

CIRCLUAR MOTION. PLACE FABRIC OVER PALLET THEN PRINT AND PULL AS NECESSARY. 

TEMPORARY BONDS (ANY APPLICATION): SPRAY ONE SIDE - WAIT SHORT OPEN TIME - ADHERE SURFACES. 

PERMANENT BONDS (ANY APPLICATION): SPRAY BOTH SIDES - WAIT SHORT OPEN TIME - PRESS TOGETHER 

- YOU’RE DONE. 

DANGER 

Contains Cyclohexane and Acetone. Extremely Flamable. Use with adequate ventilation. Keep away from heat, sparks, open flame or other ignition sources. If swallowed, do 

not induce vomiting. Contact a physician immediately. Vapor harmful. Avoid inhalation of spray mist or vapors. Eye irritant. Avoid contact with eyes and skin. In case of eye 

contact flush immediately with water and continue for 15 minutes. If irritation persists, see a physician. For skin contact, wash with soap and water. If irritation persists , call a 

physician immediately. Contents under pressure. Do not puncture or incinerate container. Do not store at temperatures above 120 0 F. KEEP OUT OF REACH OF CHILDREN. 

CAS NUMBERS: Isobutane/Propane Blend 75-28-7/74-98-6; Cyclohexane 110-82-7; Acetone 67-64-1; Glycerine Ester of Resin 8050-26-8; Synthetic Rubber 26471-45-4 

VOC INFORMATION: California ARB Consumer Products Category: Mist Spray Adhesive (VOC Standard = 65.0%) and Special Purpose Spray Adhesive: Mounting Automotive 

Engine Compartment (VOC Standard = 70.0%): Automotive Headliner Adhesives (VOC Standard = 65.0%). VOC Content = 65.0. This Product complys with current applicable 

CARB Standards. 

This container is made with at least 25% recycled steel and maybe recycled in the few but growing communities where (steel) aerosol can recycling is available. Check for 

aerosol can recycling in your area. Use can in accordance with label directions. 

EMERGENCY MEDICAL INFORMATION: 1-800-255-3924 

CAN SIZE: 20 OZ.•Net Weight 14 oz. (397 grams) • 19.6 Fl. Oz. 

Toll Free Number 1-800-241-7708 or 770-441-5900 

International Fax 770-409-7259 or 770-409-7240 

tm 

11

PLATINUM 12 

WEB SPRAY 100 

SPRAY ADHESIVE 

‘VOC COMPLIANT’ 

IDEAL FOR SCREEN PRINTERS 

AN EXCELLENT PALLET ADHESIVE 

• FAST TACK, QUICK ADHESION 

• REPOSITIONABLE 

• NON-STAINING 

• HIGH SOLIDS 

• NON-OZONE DEPLETING 

Questions? 

USES 

AN ABSOLUTE “MUST USE PRODUCT” FOR SCREEN PRINTING APPLICATIONS WHERE A STRONG 

BOND OFFERING MULTIPLE FABRIC PULLS IS MANDATORY. ALSO, WORKS GREAT AS AN 

ASBESTOS ABATEMENT ADHESIVE AS WELL AS ANY “FOAM-TO-FOAM ” APPLICATION. • 

LITERALLY THOUSANDS OF USES! 

DANGER 

• Unsurpassed Quality • Realistic Pricing 

• VOC Compliant 

Toll Free Number 1-800-241-7708 or 770-441-5900 

International Fax 770-409-7259 or 770-409-7240 

DIRECTIONS 

SHAKE CAN. AIM DIRECTIONAL TIP AT THE SURFACE. 

SCREEN PRINTING: AS A PALLET OR PLATEN, AIM AT A DISTANCE OF 6 TO 12 INCHES. SPRAY IN A CIRCLUAR MOTION. PLACE 

FABRIC OVER PALLET THEN PRINT AND PULL AS NECESSARY. 

ASBESTOS ABATEMENT: SPRAY W ALLS, WINDOW S AND OTHER AREAS, THEN HAND VINYL, POLYETHYLENE, ETC. 

FOAM-TO-FOAM: IN THE FURNITURE INDUSTRY, OR ANY APPLICATION CALLING FOR FOAM-TO-FOAM, FOAM-TO-W OOD OR 

W OOD-TO-W OOD APPLICATIONS, SIMPLY SPRAY BOTH SIDES - PRESS TOGETHER - YOU’RE DONE. 

TEMPORARY BONDS (ANY APPLICATION): SPRAY ONE SIDE - W AIT SHORT OPEN TIME - ADHERE SURFACES. 

PERMANENT BONDS (ANY APPLICATION): SPRAY BOTH SIDES - W AIT SHORT OPEN TIME - PRESS TOGETHER - YOU’RE DONE. 

Contains Cyclohexane and Acetone. Extremely Flamable. Use with adequate ventilation. Keep away from heat, sparks, open flame or other ignition sources. If swallowed, 

do not induce vomiting. Contact a physician immediately. Vapor harmful. Avoid inhalation of spray mist or vapors. Eye irritant. Avoid contact with eyes and skin. In case 

of eye contact flush immediately with water and continue for 15 minutes. If irritation persists, see a physician. For skin contact, wash with soap and water. If irritation 

persists , call a physician immediately. Contents under pressure. Do not puncture or incinerate container. Do not store at temperatures above 120 0 F. KEEP OUT OF REACH 

OF CHILDREN. 

CAS NUMBERS: Isobutane/Propane Blend 75-28-7/74-98-6; Cyclohexane 110-82-7; Acetone 67-64-1; Glycerine Ester of Resin 8050-26-8; Synthetic Rubber 26471-45-4 

VOC INFORMATION: California ARB Consumer Products Category: Mist Spray Adhesive (VOC Standard = 65.0%) and Special Purpose Spray Adhesive: Mounting Automotive 

Engine Compartment (VOC Standard = 70.0%): Automotive Headliner Adhesives (VOC Standard = 65.0%). VOC Content = 65.0. This Product complys with current applicable 

CARB Standards. 

This container is made with at least 25% recycled steel and maybe recycled in the few but growing communities where (steel) aerosol can recycling is available. Check for 

aerosol can recycling in your area. Use can in accordance with label directions. 

EMERGENCY MEDICAL INFORMATION: 1-800-255-3924 

CAN SIZE: 20 OZ.•Net Weight 12 oz. (336 grams) 

• WARNING • 

EXTREMELY FLAMMABLE. HARMFUL OR FATAL IF SWALLOWED. VAPOR HARMFUL. EYE 

IRRITANT. CONTENTS UNDER PRESSURE. KEEP OUT OF REACH OF CHILDREN. SEE ADDITIONIAL CAUTIONS ON SIDE 

tm

SPRAY GUNS 

& PARTS & ATTACHMENTS 

Air Attachment 

each 

Direct Feed Unit for MYSTIC GUN 

each 

Gun Hanger Pulley 

each 

Mystic Guns (spray guns) 

(#01A) 

(#01B) 

(01C) 

(01D) 

(01E) 

Mystic Parts 

#1 housing 

#2 housing cov er 

#3 driv e unit 

#3a v ibrating armature 

#4 switch 

#6 cable with plug 

#7 buffer part 

#8 control knob 

#9 brake spring 

#10 front body 

#11 adjusting roller 

#12 adjusting roller spring 

#13 pump cylinder 

#14 piston 

#15 piston spring 

#16 intermediate push rod 

#17-18-19 deliv ery v alv e assembly 

#20 nozzle head 

#21 container 

#22 suctioin tube with strainer 

#23 threaded s tud 

#24 set screw 

#32 ADJUSTABLE NOZZLE 

& replacement parts 

32 NOZZLE (COMP) 

32-1 NUT 

32-2 ADJ.NOZZ.EXT. 

32-3 NOZZLE COLLAR 

32-4 SCREW BODY 

32-5 E-RING 

32-6 BRASS WASHER 

32-7 TEFLON RING 

32-8 NOZZLE HEAD 

MYSTIC 

TEXTILE CLEANING GUN 

PARTS LIST AND SCHEMATICS 

*see parts breakdown on pages 14 and 15 

13 

MITEY-MITE 

TEXTILE CLEANING GUN 

*NOTE: PARTS ARE NOT PICTURED 

DIFFERENT FROM THE MYSTIC, IT ALSO 

FEATURES HIGH PRESSURE QUALITIES. 

FURTHER, IT SELDOM NEEDS ANY MAIN- 

TENANCE. 

MANY MILLS AND USERS SWEAR BY 

THIS GUN. ALSO LIGHTER WEIGHT. 

EACH / SPECIAL ORDER

A 

L 

L 

M 

E 

T 

A 

L 

H 

A 

N 

D 

L 

E 

MYSTIC tm TEXTILE CLEANING GUNS 

#01B 

#1 SELLER, AS PICTURED. 

FEATURES ADJUSTABLE 

NOZZLE. SAME GREAT GUN 

AS THE #01A. THE MOST 

TRUSTED SPRAY GUN ON 

THE MARKET! 

#01A - ALL MYSTIC GUNS ARE BASICALLY THE 

SAME UNITS WITH DIFFERENT OPTION PACKAGES. 

THE #01A IS THE STANDARD UNIT. IT IS THE SECOND 

BEST SELLER AND SHOULD BE USED BY TEXTILE 

MILLS, ETC., WHERE AN ADJUSTABLE NOZZLE IS NOT 

MANDATORY. 

#01C - EQUIPPED WITH ADJUSTABLE 

NOZZLE AND AIR ATTACHMENT FOR FAST 

DRYING OF FABRICS. 

#01D - EQUIPPED WITH ADJUSTABLE 

NOZZLE AND DIRECT FEED UNIT FOR 

DISPENSING FROM CONTAINER. 

#01E - EQUIPPED WITH ADJUSTABLE 

NOZZLE, DIRECT FEED UNIT FOR 

DISPENSING FROM CONTAINER AND AN 

AIR ATTACHMENT. ALL THE WHISTLES! 

MYSTIC TM CLEANING GUN (TROUBLESHOOTING) 

This tough, dependable and durable cleaning gun is designed to handle the strongest of solvents. Metal handle reduces risk of breaking if dropped. Factory 

authorized replacement parts and repair service readily available, usually within 48 hours, 110 Volt/6C Cycle A.C. 

CAUTION: The gun builds up considerable pressure. Never point the gun at yourself or other persons, as this may cause injury. 

The Mystic Cleaning Gun is preset at the factory and adjustments are generally not required. 

Remove the container, fill with fluid (about 2/3 full) and replace. Plug gun into a 11OV 60Hz outlet. Depress switch for 15- 20 seconds to prime pump. Spray fluid 

onto scrap fabric to remove oil film from internal pump parts. MYSTIC Spray gun is now ready for use. 

OPERATING INSTRUCTIONS 

1 ) THE ADJUSTING ROLLER ON TOP OF THE GUN controls the degree of atomization of fluid when not equipped with an adjustabIe nozzle. Approximate setting 

for maximum pressure for textile or screen cleaning is at a point where 1/ 8" clearance is visible between rear of air intake and forward extremity of housing (#1 ). 

The set screw (#24) on the left- hand side of the barrel must be removed BEFORE attempting to move the ADJUSTING ROLLER. 

2) VOLUME CONTROL KNOB AT REAR OF GUN controls the vo!lume of fluid dispensed. For textile cleaning, turn button as far left as possible; then, back to right 1/ 

2 to 1 revolution. Once adjustments are made to satisfactory pressure and volume setting; it is not generally necessary to change them. 

TROUBLE SHOOTING MINOR MECHANICAL PROBLEMS 

Some of the cleaning guns returned for repairs are found to be out of adjustment at the adjustable roller or volume control; or, have simply had minor mechanical 

difficulties which could have been easily taken care of by plant electricians. Some troubleshooting problems and causes are listed below: 

1) FLUID LEAKAGE 

It is necessary that all parts, particularly the nozzle head, be tight to prevent fluid working its way through the screws threads. Cleaning should also be done at an 

angle no greater than 45 o to prevent leakage from the air hole at the top of the gun. Leakage will also occur at the screw threads of the container cup if it is tilted 

forward for an extended period. 

2) LACK OF PRESSURE 

The primary cause of lack of pressure occurs when the suction tube set screw, and nozzle head are not tight and the unit is sucking air. Blockage in the pump unit 

or nozzle and weak/damaged springs in the pump assembly are also a cause of low pressure. A lack of pressure will also occur when the primer is lost due to 

excessive tilting of the gun. 

3) OPERATION WITHOUT FLUID 

It is highly recommended that this unit not be operated empty since undue wear and strain is caused on all working parts. Continued use of an empty gun wiIl surely 

cause breakage of parts and needless repairs. 

4) LUBRICATION 

The gun should not be over -lubricated. One or two drops of light machine oil used daily is sufficient to keep the pump unit in working condition. For storage or 

discontinued use, it is recommended that a light machine oil be pumped through the gun in the same manner as cleaning fluids for a period of 2 to 3 seconds. For 

start- up, cleaning fluid should be run through the unit prior to putting it into operation so that any oily films might be pumped through the unit and flushed out. 

REPAIR PARTS AND MAJOR GUN REPAIRS 

Normally, any repairs which are needed to the guns are minor in nature and we suggest that they be examined by the company electrician for apparent minor 

malfunctions. This inspection will probably involve disassembly of the pump unit and perhaps removal of the housing cover for examination. In practically all cases, 

these minor repairs can be made quickly without significant loss of time from operation. Should there be obviously damaged parts which must be replaced, said 

parts should be ordered from AMERICAN NIAGARA directly by number taken from the parts list supplied in the instruction sheet. Use only parts manufactured for 

and distributed by AMERICAN NIAGARA. 

1 4

#6 cable w/plug 

#14 piston 

#15 piston spring 

#13 pump cylinder 

#17/18/19 val.assby 

#20 std. nozzle 

#32 adj. nozzle 

complete 

#32-7 teflon 

ring 

#32-8 nozzle head & 

cover 

#32-6 brass 

washer 

#32-5 e-ring 

#11 adjustable roller #12 adjustable roller #8 control knob 

spring 

(inside #11) 

WWW.AMERICAN-NIAGARA.COM 

#24 set screw 

(fits into roller) 

#1&2 housing 

#9 brake spring 

#11 adj. roller 

#7 buffer part 

#3a vib. armature 

#3 drive unit 

#21 container 

#4 switch 

#10 front body 

#23 threaded 

stud 

#16 intermediate 

push rod 

#32-1 nut 

#32-4 screw 

body 

#32-3 nozle 

collar 

#32-2 nozzle 

extension 

15 

MYSTIC 

1-800-241-7708 

PHONE: 770-441-5900 FAX: 770-409-7259 

AMERICAN NIAGARA // TEE SQUARES 

E-MAIL: DAVID@AMERICAN-NIAGARA.COM

CELEBRATING 

OUR 

th 

38 

ANNIVERSARY 

1971 - 2009 

THANK YOU! 

MISSION STATEMENT 

We remain committed to provide YOU our customer with superior customer service. 

We provide the correct solutions that will enable you to improve YOUR processes 

that will ultimately increase your bottom-line. You have our firm promise to the highest 

quality BRAND-NAME products. We offer YOU the most reliable and professional 

Technical Support - anywhere! We take great pride in our unparalleled 

Customer Service. We embrace sound and ethical business practices with YOU in 

mind. Contact us for no-nonsense ANSWERS to solve your everyday problems. 

MEET YOUR PERSONAL SUPPORT TEAM! 

Wayne Gramling 

Vice-President 

& General Manager 

Toll Free 800-241-7708 

770-441-5900 • ext. 116 

wayne@american-niagara.com 

Mobile Phone 404-406-3069 

Gary Voelz 

Vice-President 

Screen Print Supply Div. 

Toll Free 800-241-7708 

770-441-5900 • ext. 110 

gary@american-niagara.com 


David Barocas 

Manager, Specialty Sales 

Toll Free 800-241-7708 

770-441-5900 • ext. 100 

david@american-niagara.com 


Melanie Smallwood 

Customer Service Manager 

Toll Free 800-241-7708 

770-441-5900 • ext. 102 

melanie@american-niagara.com 

April Hofmann 

Manager, Florida Sales 

April Hofmann • 1-352-685-2000 

americanniagara@aim.com 

Scotty Barocas 

President 

Ervin Barocas 

President (Emeritus) 

Toll Free 800-241-7708 

770-441-5900 • ext. 102 

ervin@american-niagara.com 

Al Cohen 

CFO / Comptroller 

Vic Barocas 

CEO 

Toll Free 800-241-7708 

770-441-5900 • ext. 112 

victor@american-niagara.com 


Mariela Carrasquillo 

Manager, International Sales 

Betty Roistacher Reggie Morganfeld 

Customer Service 

Toll Free 800-241-7708 

770-441-5900 • ext. 101 

betty@american-niagara.com 

Toll Free 800-241-7708 

770-441-5900 • ext. 105 



Toll Free 800-241-7708 

770-441-5900 • ext. 104 

albert@american-niagara.com 

Toll Free 800-241-7708 

770-441-5900 • ext. 129 

mariela@american-niagara.com 


Manager, Plant Operations 

Toll Free 800-241-7708 

770-441-5900 • ext. 114 

reggie@american-niagara.com 

ii 

To contact Mariela Direct: 

678-429-3952

Spot Removers - American Niagara

Create successful ePaper yourself

Delete template?

Save as template?