5.1 DigiRack Plug-Ins Guide - Digidesign Support Archives

66
R
RAM and DAE memory 2
Range parameter 31, 32
Ratio parameter 28, 49, 51
real-time plug-ins 3
Reduction meter 28, 31
Reference Pitch parameter 52
Region by Region mode 19
Region List command 18
Release parameter 28, 30
Reverse plug-in 47
Root Settings folder 14
specifying 15
RTAS plug-ins 1
improving performance 4
S
saving plug-in settings 15
Save Plug-In Settings To command 14
Save Settings As command 14
Save Settings command 14
Scrub Trimmer 23
selecting tracks for AudioSuite processing 23
Selection Reference selector 18
Set As User Default command 14
Set Plug-In Default To command 14
Set Root Settings Folder command 14
settings 8, 21
choosing a destination for 15
copying 15
creating subfolders 16
creating User Default 15
importing 15
pasting 15
saving 15
Settings Preferences command 14
Settings menu 8
Short Delay plug-in 34, 46
shortcuts for keyboard input 10
sibilants 33, 48
Side Chain Input Selector 21
side chain processing 8, 11, 34
Signal Generator plug-in 41, 47
parameters 42
Signal parameter 42
Slap Delay plug-in 34, 46
DigiRack Plug-Ins Guide
software synthesizers 55
Source and Destination parameters 49
subfolders, creating for settings 16
System Usage window 4
T
Target button 9
TC/E parameter 23
TDM plug-ins 1, 3
DSP delay chart 61
DSP induced delays 5
DSP requirements 57
inserting on tracks 7
moving and duplicating 7
removing from tracks 7
Tempo parameter 37
Threshold parameter 28
Time Compression/Expansion plug-in 49
Time Correction parameter 51
TimeAdjuster plug-in 39
parameters 39
using for delay compensation 5
track process mode 20
Track Selector 8
Trim plug-in 35
parameters 36
U
Undo/Redo command 21
unlinking plug-in controls 11
Use in Playlist button 18
User Default setting, creating 15
W
white noise 42