5.1 DigiRack Plug-Ins Guide - Digidesign Support Archives
5.1 DigiRack Plug-Ins Guide - Digidesign Support Archives
5.1 DigiRack Plug-Ins Guide - Digidesign Support Archives
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
appendix b<br />
DSP Delays Incurred by TDM <strong>Plug</strong>-<strong>Ins</strong><br />
This table shows the delays inherent in each type of <strong>DigiRack</strong> TDM plug-in. Delays matter only if you<br />
use a real-time TDM plug-in on one channel of a stereo or multichannel signal but not the others.<br />
This can cause the channels to be out of phase.<br />
Use the TimeAdjuster plug-in to compensate for these delays. See “TimeAdjuster” on page 39.<br />
Table 3. Samples of delay incurred by each real-time <strong>DigiRack</strong> TDM plug-in on MIX and DSP Farm cards<br />
<strong>Plug</strong>-In Samples of delay on MIX cards Samples of delay on DSP Farm cards<br />
EQ II (1-band) 4 4<br />
EQ II (4-band) 4 4<br />
Compressor II 4 4<br />
De-esser 4 4<br />
Limiter II 4 4<br />
Gate II 4 4<br />
Expander/Gate II 4 4<br />
Mod Delay (short) 4 4<br />
Mod Delay (slap) 4 4<br />
Mod Delay (medium) 4 4<br />
Mod Delay (long) 4 n/a<br />
Procrastinator n/a 3<br />
Dither 4 4<br />
Appendix B: DSP Delays Incurred by TDM <strong>Plug</strong>-<strong>Ins</strong> 61