5.1 DigiRack Plug-Ins Guide - Digidesign Support Archives

Expander/Gate II AudioSuite plug-in
De-esser plug-in
Invert
The Invert plug-in reverses the polarity of the selected
audio. All positive sample amplitude values
are made negative, and all negative amplitudes
are made positive. This process is useful
for permanently altering the phase (polarity) relationship
of tracks. The Invert plug-in is particularly
useful during mixing because it allows
you to modify frequency response between
source tracks recorded with multiple microphones.
It also allows you to correct for audio recorded
out of phase with an incorrectly wired
cable.
Invert plug-in
Duplicate
The Duplicate plug-in duplicates the selected
audio in place. Depending on how its parameters
are configured, the new region will appear
in either the Regions List or playlist. This allows
you to “flatten” or consolidate an entire track
consisting of multiple regions into one continuous
audio file that resides in the same place as
the original individual regions.
Duplicate plug-in
The audio is unaffected by Pro Tools volume or
pan automation, or by any real-time plug-ins
that may be in use on the track as inserts. The
original audio file regions are merely rewritten
in place to a single duplicate file.
Chapter 5: DigiRack Non-Real-Time AudioSuite Plug-Ins 45