5.1 DigiRack Plug-Ins Guide - Digidesign Support Archives
5.1 DigiRack Plug-Ins Guide - Digidesign Support Archives 5.1 DigiRack Plug-Ins Guide - Digidesign Support Archives
42 Signal Generator Parameters Frequency Sets the frequency of the signal in hertz. Values range from a low of 20 Hz to a high of 20 kHz. Level Sets the amplitude of the signal in decibels. Values range from a low of -95 dB to a high of 0.0 dB. Signal These buttons select the waveform. Choices are sine, square, sawtooth, triangle, white noise, and pink noise. DigiRack Plug-Ins Guide
chapter 5 DigiRack Non-Real-Time AudioSuite Plug-Ins EQ II The EQ II plug-in allows you to use either a 1band or 4-band EQ to adjust the frequency spectrum of an audio selection. The 1-band EQ can be configured as a hi-pass, lo-shelf, hi-shelf, lopass or peak EQ. The 4-band EQ provides one hishelf, one lo-shelf and two peak EQs. 1-band EQ II AudioSuite plug-in The features of these plug-ins are identical to their real-time TDM counterparts. The only difference is that the AudioSuite versions operate in non-real time, while the TDM versions operate in real time. 4-band EQ II AudioSuite plug-in For information on the individual parameters of these plug-ins, see “EQ II” on page 25. Chapter 5: DigiRack Non-Real-Time AudioSuite Plug-Ins 43
- Page 1 and 2: Pro Tools DigiRack Plug-Ins Guide V
- Page 3 and 4: contents Chapter 1. Getting Started
- Page 5 and 6: chapter 1 Getting Started with Plug
- Page 7 and 8: chapter 2 Working with Real-Time Pl
- Page 9 and 10: 3 From the CPU Usage Limit pop-up,
- Page 11 and 12: Inserting Plug-Ins on Tracks To use
- Page 13 and 14: Enable Automation Parameters Allows
- Page 15 and 16: To edit parameters with a keyboard:
- Page 17 and 18: Command-Control-Option-click (Macin
- Page 19 and 20: Choosing a Destination for Settings
- Page 21 and 22: chapter 3 Working with AudioSuite P
- Page 23 and 24: Use In Playlist On, Reference = Reg
- Page 25 and 26: Process Clicking this button begins
- Page 27 and 28: TC/E Selects the Time Compression &
- Page 29 and 30: chapter 4 DigiRack Real-Time TDM an
- Page 31 and 32: Dynamics II There are five types of
- Page 33 and 34: Limiter II Limiter II plug-in The L
- Page 35 and 36: Attack Sets the attack time of the
- Page 37 and 38: De-esser De-esser plug-in The De-es
- Page 39 and 40: • The Long Delay provides 162474
- Page 41 and 42: Feedback (FB) Controls the amount o
- Page 43 and 44: Noise Shape This button engages or
- Page 45: To view time delay values and use T
- Page 49 and 50: Expander/Gate II AudioSuite plug-in
- Page 51 and 52: Peak On Each Track Searches for the
- Page 53 and 54: Time Compression/ Expansion The Tim
- Page 55 and 56: Pitch Shift Parameters In addition
- Page 57 and 58: chapter 6 DirectConnect DirectConne
- Page 59 and 60: Digidesign StreamManager This file
- Page 61 and 62: appendix a DSP Requirements for TDM
- Page 63 and 64: Table 2. Maximum instances of real-
- Page 65 and 66: appendix b DSP Delays Incurred by T
- Page 67 and 68: index A Accuracy parameter 50, 51 a
- Page 69 and 70: keyboard shortcuts 10 Knee paramete
chapter 5<br />
<strong>DigiRack</strong> Non-Real-Time AudioSuite <strong>Plug</strong>-<strong>Ins</strong><br />
EQ II<br />
The EQ II plug-in allows you to use either a 1band<br />
or 4-band EQ to adjust the frequency spectrum<br />
of an audio selection. The 1-band EQ can<br />
be configured as a hi-pass, lo-shelf, hi-shelf, lopass<br />
or peak EQ. The 4-band EQ provides one hishelf,<br />
one lo-shelf and two peak EQs.<br />
1-band EQ II AudioSuite plug-in<br />
The features of these plug-ins are identical to<br />
their real-time TDM counterparts. The only difference<br />
is that the AudioSuite versions operate<br />
in non-real time, while the TDM versions operate<br />
in real time.<br />
4-band EQ II AudioSuite plug-in<br />
For information on the individual parameters<br />
of these plug-ins, see “EQ II” on<br />
page 25.<br />
Chapter 5: <strong>DigiRack</strong> Non-Real-Time AudioSuite <strong>Plug</strong>-<strong>Ins</strong> 43