Boltec s118-121.indd
Boltec s118-121.indd
Boltec s118-121.indd
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
<strong>Boltec</strong> SL<br />
A seme-mechanized rock bolting rig with electrical<br />
Remote control system for safety and productivity.<br />
For bolt lengths 1.6 – 1.8 m. Effective in roof<br />
heights up to 1.8 m<br />
Rock bolting with Swellex bolts, resin grouted rebar<br />
bolts or mechanical bolts. Hole size diameter 29 up to<br />
51 mm. In 1.8 m roof height max. bolt length is<br />
1.6 - 1.8 m depending on bolt type.<br />
Resin bolting quality is controlled by pre-setting the<br />
bolt rotator’s speed, torque and acting time for<br />
accurate mixing and curing of the resin.<br />
Swellex bolting quality is controlled by pre-setting<br />
the infl ation time.<br />
Extension drilling up to 51 mm enables installation of<br />
Connectable Swellex rockbolts up to any lengths in low<br />
roof heights.<br />
Electrical pilot system with controls for positioning,<br />
drilling and bolting in a portable operator’s control<br />
panel.<br />
MBU 16SL bolting unit with a unique design based on<br />
a single feed system utilizing a cradle indexer at the<br />
rear end and a robust drill steel support at the top end.<br />
Designed for maximum fl exibility during drilling and<br />
bolting. Bolting unit is connected to the boom via a<br />
fl exible positioning unit.<br />
Extendable protective roof at the bolting unit for<br />
improved operator’s safety. Hydraulic jacks to support<br />
the panel roof at the bolting unit with a force of 80 kN.<br />
COP 1028HB is a light rock drill with separate reversible<br />
rotation and stepless variable rotation speed, and high<br />
torque capacity that contribute to good drilling results.<br />
BUT 32SL heavy-duty boom for direct, fast and<br />
accurate positioning between holes. Improved linkage<br />
bearings in main boom joints and new axial bearings<br />
in all boom joints reduce maintenance.<br />
Sturdy, articulated carrier with four wheel drive<br />
for fast tramming and easy manoeuvring in narrow<br />
tunnels and drifts. Power steering, failsafe brakes and<br />
central lubricated chassis. Four jacks for stable set up.<br />
ROCK REINFORCEMENT<br />
BOLTING RIG SPECIFICATION<br />
Basic rig includes telescopic FOPS-approved protective<br />
roof, cable reel, work lights, water booster pump and<br />
pump unloading function for easier start with low<br />
voltage. Standardization with Rocket Boomer S1L on<br />
high capacity 55 kW electric motor and powerpack.<br />
Minimum tramming height 1.3 m.<br />
Optional equipment<br />
Automatic boom lubrication system, rear part<br />
Bolt rotator for max 240 Nm/ 810 rpm or<br />
max 480 Nm/450 rpm<br />
Rock drill lubrication warning kit<br />
Swellex installation equipment<br />
Alternative roof stops; min 1500 mm, max 1700 mm<br />
Exhaust catalyser<br />
Fire suppression system Ansul<br />
Guards to prevent start of tramming with jacks down,<br />
slide beam out or roof up<br />
Safety belt<br />
Rear view mirrors<br />
Beacon warning lamp<br />
Back-up alarm<br />
Electric outlet for accessories<br />
Rig washing kit, with water hose and reel<br />
Manual lubrication system<br />
Main specifi cations<br />
<strong>Boltec</strong> SL<br />
Rock drill 1 x COP 1028<br />
Bolting unit MBU 16SL<br />
Boom 1 x BUT 32SL<br />
Drilling system EDS<br />
Length, tramming 10000 mm<br />
Width 2480 mm<br />
Height, carrier 1300 mm<br />
roof min/max 1300/1700 mm<br />
Turning radius 6180/3550 mm<br />
Weight 12800 kg<br />
Visit www.rockreinforcement.com for more information<br />
119
Change language