CLI Guide - WatchGuard Technologies
CLI Guide - WatchGuard Technologies
CLI Guide - WatchGuard Technologies
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
CHAPTER 3: Configuration Mode Commands<br />
to the HA1 ports, an added level of redundancy is<br />
insured.<br />
primary ip <br />
secondary | <br />
This allows you to set the IP addresses and<br />
netmasks for the primary and secondary device’s<br />
HA ports.<br />
Example<br />
WG#config<br />
WG(config)#high_availability <br />
WG(config-ha)#advanced<br />
WG(config-ha-advanced)#primary ha1 ip \<br />
10.10.10.11|255.255.0.0 \<br />
secondary ha1 ip 10.10.10.12<br />
Level 2 IKE configuration commands<br />
action command (configure IKE level)<br />
WG#config<br />
WG(config)#ike <br />
WG(config-ike)#action \<br />
[no]<br />
[-natt [-natt_keepalive<br />
] ]<br />
[extended_authentication] [+] \<br />
-rsa<br />
{} \<br />
-dss {} \<br />
-preshared<br />
{
Change language