CLI Guide - WatchGuard Technologies
CLI Guide - WatchGuard Technologies
CLI Guide - WatchGuard Technologies
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Second level configuration mode commands<br />
High Availability advanced configuration mode<br />
WG#config<br />
WG(config)#high_availability <br />
WG(config-ha)#advanced<br />
WG(config-ha-advanced)#<br />
[action ]<br />
[ha2 ]<br />
[primary ip ]<br />
[secondary |<br />
]<br />
show show current<br />
configuration and statistics<br />
history show command<br />
history<br />
rename rename an object<br />
exit go back to parent<br />
level<br />
top go back to root<br />
level<br />
Effect<br />
Allows you to configure advanced settings for<br />
High Availability.<br />
Arguments<br />
action <br />
Allows you to manually failover or restart the local<br />
or peer appliance of the HA pair. The local<br />
appliance is the one you are connected to, and the<br />
peer is its HA pair.<br />
ha2 <br />
Allow you to enable the HA2 port for HA use.<br />
When this is enabled, and the HA2 ports are<br />
connected between the two appliances, in addition<br />
<strong>WatchGuard</strong> Command Line Interface <strong>Guide</strong> 77