CLI Guide - WatchGuard Technologies
CLI Guide - WatchGuard Technologies
CLI Guide - WatchGuard Technologies
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Example<br />
Second level configuration mode commands<br />
WG(config-ha)#show<br />
HA Type: Active_Active<br />
Primary System Name =2026<br />
Secondary System Name =2027<br />
No Shared Secret<br />
Interfaces Primary IP Mask Secondary IP Mask<br />
Monitoring<br />
0: 192.168.104.64 255.255.255.0 192.168.104.65 255.255.255.0 ON<br />
1: 192.128.134.32 255.255.255.0 192.128.134.33 255.255.255.0 ON<br />
2: 30.0.0.1 255.0.0.0 30.0.0.8 255.0.0.0 OFF<br />
3: 40.0.0.1 255.0.0.0 40.0.0.2 255.0.0.0 OFF<br />
Advanced HA Parameters: HA1:Enabled HA2:Disabled<br />
Primary<br />
HA1 IP 1.0.0.1 netmask 255.255.255.0<br />
HA2 IP 10.10.10.26 netmask 255.255.0.0<br />
Secondary<br />
HA1 IP 1.0.0.3 netmask 255.255.255.0<br />
HA2 IP 10.10.10.27 netmask 255.255.0.0<br />
HA Status<br />
HA Role: Primary<br />
DB Time Stamp:<br />
Primary: Thu Dec 5 16:38:58 2002<br />
Secondary: Thu Dec 5 16:38:58 2002<br />
Status: Primary: ACTIVE Secondary: ACTIVE<br />
<strong>WatchGuard</strong> Command Line Interface <strong>Guide</strong> 73
Change language