CLI Guide - WatchGuard Technologies

Second level configuration mode commands
• “Level 2 High Availability configuration commands”
on page 72
• “Level 2 IKE configuration commands” on page 78
• “Level 2 interface configuration commands” on
page 82
• “Level 2 IPSec configuration commands” on page 95
• “Level 2 license commands (for upgraded or additional
features)” on page 117
• “Level 2 Quality of Service (QoS) configuration
commands” on page 100
• “Level 2 Remote Access Service (RAS) configuration
commands” on page 102
• “Level 2 System Configuration commands” on
page 107
• “Level 2 tenant configuration commands” on page 119
Level 2 certificate configuration commands
request command (configure certificate level)
WG#config
WG(config)#certificate
WG(config-cert)#request -company
\
[-country] [-department ]
-dns_name \
[-ip_address ] [user_domain
\
] [-key_usage {
\
}]
Effect
Generates a VPN certificate request that can be sent
to a certifying authority. After executing this
command (with the required arguments), you must
cut the resulting certificate text and paste it into the
relevant form: an e-mail message, a Web-site
WatchGuard Command Line Interface Guide 67