CLI Guide - WatchGuard Technologies

as command
Top-level configuration mode commands
WG#config
WG(config)#ras
Effect
Enters the remote access services (RAS)
configuration mode, at which point you can enter
RAS connection-specific commands and their
arguments.
Arguments
None in this mode.
See Also
See “Level 2 Remote Access Service (RAS)
configuration commands” on page 102 for details
on specific “RAS” mode commands.
rename command
WG#config
WG(config)#rename \
Effect
Substitutes a new name for an existing object name.
Arguments
Use this argument to enter the type of object this
name is applied to, whether (for example) an IPSec
action, an address group, a RAS user profile, etc.
Use this command to enter the existing name.
Use this command to enter the new name.
Example
WG(config)#rename address eng_net
engineering
WatchGuard Command Line Interface Guide 61