CLI Guide - WatchGuard Technologies
CLI Guide - WatchGuard Technologies
CLI Guide - WatchGuard Technologies
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Top-level configuration mode commands<br />
[no][-pingofdeath]<br />
Activates ping-of-death protection.<br />
[no][-sourceroute]<br />
Activates source route protection by disallowing<br />
source route options.<br />
[no][-server_ddos ]<br />
Activates server DDOS protection; the default<br />
threshold = 100, which controls the maximum<br />
number of connections permitted to any one<br />
server.<br />
[no][-client_ddos ]<br />
Activates client DDOS protection; the default<br />
threshold=100, which controls the maximum<br />
number of connection requests permitted to a<br />
single client.<br />
no<br />
Enter this before any options you want to<br />
deactivate in this appliance, as shown above.<br />
Example<br />
WG(config)#denial -syn 1000 no -<br />
udp<br />
high_availability commands<br />
NOTE<br />
High Availability commands will not be available to you if<br />
the <strong>WatchGuard</strong> appliance you are administering does not<br />
feature any HA ports. In addition, you need a High<br />
Availability feature license.<br />
Enter high availability configuration mode<br />
WG#config<br />
WG(config)# high_availability<br />
<strong>WatchGuard</strong> Command Line Interface <strong>Guide</strong> 47