CLI Guide - WatchGuard Technologies

CHAPTER 1: Using the Command Line Interface
Command Description
WG(config-ras)#group_profile create RAS group profiles for use in
RAS policies
WG(config-ras)#user_profile create RAS user accounts for use in
RAS policies
WG(config-ras)#database set up the user authentication system for
RAS policies
WG(config)#policy create the actual policies
To remove/delete items from a WatchGuard
database
To remove a particular object (policy, action, group profile,
etc.), use this command:
WG(config)#delete
To save and apply your most recent changes
To save and apply the latest changes and additions to this
appliance’s configurations and policies, use this command:
WG(config)#commit
To maintain an appliance
To perform security appliance maintenance, use these commands:
Command Description
WG(admin)#flush flush all current connections and SAs
WG(admin)#passwd replace the existing password with a new one
WG(admin)#reboot reboot the WatchGuard appliance
WG(admin)#shutdown shut down the WatchGuard appliance
To troubleshoot an appliance
To perform troubleshooting tasks, use these commands:
22 WatchGuard Vclass 5.1