CLI Guide - WatchGuard Technologies

Command Description
Installing and configuring a WatchGuard appliance
WG(config)#cert request and import needed certificates
from CA’s
WG(config)#denial_of_service customize anti-hacker protection for
this appliance
WG(config)#high_availability set up and activate a high-availability
system, using the High Availibility
feature
WG(config)#log includes event, traffic and alarm log
files
To create and apply security policies
To create and apply security policies, use these commands:
Command Description
WG(config)#address create all the needed address groups for
use in policies
WG(config)#service add new services or groups of related
services
WG(config-ike)#action create IKE actions for use in IKE
policies)
WG(config-ike)#policy create IKE policies for use in IPSec
policies
WG(config-ipsec)#action create IPSec actions for use in IPSec
proposals
WG(config-ipsec)#proposal create IPSec proposals for use in
security policies
WG(config)#nat create NAT actions (DNAT, SNAT or
VIP) for use in policies
WG(config)#vlan create VLAN IDs for use in policies
WG(config-qos)#action create QoS actions for use in policies
WG(config)#schedule create schedules for application to
specific policies
WatchGuard Command Line Interface Guide 21