CLI Guide - WatchGuard Technologies
CLI Guide - WatchGuard Technologies
CLI Guide - WatchGuard Technologies
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
CHAPTER 3: Configuration Mode Commands<br />
the Radius server, if another than the default port<br />
number is used.<br />
<br />
This argument indicates the Radius password and<br />
its text.<br />
[-backup_radius_ip a.b.c.d] \<br />
[backup_radius_port NUMBER]<br />
This pair of arguments allows you to note a backup<br />
Radius server and its port number, if present.<br />
Example<br />
WG(config-tenant)#user_domain<br />
\<br />
-interface 1 192.168.12.34 -id 6666 -<br />
idle 720 \<br />
-radius 12.12.3.144 \<br />
-radius_secret "no_admit"<br />
Level 3 configuration mode commands<br />
The following section, detailing all the third-level configuration<br />
commands, has been divided into “task” or “topical”<br />
collections, which include the following:<br />
• Route configuration this page<br />
• Log configuration page 124<br />
Level 3 route configuration commands<br />
Configure new static route<br />
WG#config<br />
WG(config)#system<br />
WG(config-sys)#route<br />
WG(config-route)#static \<br />
interface <br />
122 <strong>WatchGuard</strong> Vclass 5.1