CLI Guide - WatchGuard Technologies
CLI Guide - WatchGuard Technologies
CLI Guide - WatchGuard Technologies
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Second level configuration mode commands<br />
ha1 command (configure interface level)<br />
WG#config<br />
WG(config)#interface<br />
WG(config-if)#ha1 <br />
Effect<br />
Use this command to configure the network<br />
identity of a <strong>WatchGuard</strong> appliance's High<br />
Availability 1 interface, when this interface is used<br />
for management access instead of H-A<br />
functionality.<br />
Arguments<br />
<br />
This argument records the IP address assigned to<br />
this interface.<br />
<br />
This argument records the number of bits in the<br />
subnet mask, or the subnet mask.<br />
Example<br />
WG(config-if)#ha1 10.0.0.1<br />
255.255.255.0<br />
or<br />
WG(config-if)#ha1 10.0.0.1/24<br />
ha2 command (configure interface level)<br />
WG#config<br />
WG(config)#interface<br />
WG(config-if)#ha2 <br />
Effect<br />
Use this command to configure the network<br />
identity of a <strong>WatchGuard</strong> appliance's High<br />
Availability 2 interface, when this interface is used<br />
for management access instead of H-A<br />
functionality.<br />
<strong>WatchGuard</strong> Command Line Interface <strong>Guide</strong> 93