UL TEST REPORT AND PROCEDURE - ZIPPY

Issue Date: 2004-06-28 

2010-06-22 

Page 1 of 19 Report Reference # E143756-A21-UL 

UL TEST REPORT AND PROCEDURE 

Standard: UL 60950-1, 2nd Edition, 2007-03-27 (Information Technology 

Equipment - Safety - Part 1: General Requirements) 

CSA C22.2 No. 60950-1-07, 2nd Edition, 2007-03 (Information 

Technology Equipment - Safety - Part 1: General Requirements) 

Certification Type: Power Supplies for Information Technology Equipment Including 

Electrical Business Equipment 

CCN: QQGQ2, QQGQ8 

Product: Power Supply, Built-In DC/DC (PS4) 

Model: DP1H-6350F, DP1H-6400F, DP2H-6350F, DP2H-6400F, SP410-1D 

Rating: Input : -36 to -72 V DC, 17 A (Optional) 

Output : 

Model DP1H-6350F and DP2H-6350F: 

5V/35 A, +12V/22A, 3.3V/0-20A, -5V/0-0.5A, -12V/0-0.5A, 

(+5&+3.3V max. 40A; max. power 350W) 

Model DP1H-6400F and DP2H-6400F: 

5V/35 A, +12V/28A, 3.3V/0-20A, -5V/0-0.5A, -12V/0-0.5A, 

(+5&+3.3V max. 45A; max. power 400W) 

Model SP410-1D: 

+5V/35 A, +12V/32A, +3.3V/20A, +5VSB/3A, -12V/0.5A, 

(+5&+3.3V max. 160W; max. power 410W) 

Applicant Name and Address: ZIPPY TECHNOLOGY CORP 

10TH FL 

50 MIN CHYUAN RD 

SHIN-TIEN 

TAIPEI HSIEN 231 TAIWAN 

This is to certify that representative samples of the products covered by this Test Report have been investigated in accordance with the 

above referenced Standards. The products have been found to comply with the requirements covering the category and the products are 

judged to be eligible for Follow-Up Service under the indicated Test Procedure. The manufacturer is authorized to use the UL Mark on 

such products which comply with this Test Report and any other applicable requirements of Underwriters Laboratories Inc. ('UL') in 

accordance with the Follow-Up Service Agreement. Only those products which properly bear the UL Mark are considered as being 

covered by UL's Follow-Up Service under the indicated Test Procedure. 

The applicant is authorized to reproduce the referenced Test Report provided it is reproduced in its entirety. 

Copyright © 2010

Issue Date: 2004-06-28 

2010-06-22 


UL authorizes the applicant to reproduce the latest pages of the referenced Test Report consisting of the first page of the Specific 

Technical Criteria through to the end of the Conditions of Acceptability. 

Any information and documentation involving UL Mark services are provided on behalf of Underwriters Laboratories Inc. (UL) or any 

authorized licensee of UL. 

Kam H Chan 

Prepared by: 

Underwriters Laboratories Inc. 

Bob Hilbrecht 

Reviewed by: 

Underwriters Laboratories Inc. 

Copyright © 2010

Issue Date: 2004-06-28 

2010-06-22 


Supporting Documentation 

The following documents located at the beginning of this Procedure supplement the requirements of this Test 

Report: 

A. Authorization - The Authorization page may include additional Factory Identification Code markings. 

B. Generic Inspection Instructions - 

i. Part AC details important information which may be applicable to products covered by this Procedure. 

Products described in this Test Report must comply with any applicable items listed unless otherwise 

stated in the body of this Test Report. 

ii. Part AE details any requirements which may be applicable to all products covered by this Procedure. 

Products described in this Test Report must comply with any applicable items listed unless otherwise 

stated in the body of each Test Report. 

iii. Part AF details the requirements for the UL Certification Mark which is not controlled by the technical 

standard used to investigate these products. Products are permitted to bear only the Certification 

Mark(s) corresponding to the countries for which it is certified, as indicated in each Test Report. 

Product Description 

DC to DC power supply - electronic components mounted to PWB, and housed in metal chassis. 

Model Differences 

- Model DP1H-6350F is identical to model DP1H-6400F except for model designation and output rating. 

- Model DP2H-6350F is identical to model DP2H-6400F except for model designation and output rating. 

- Model DP1H-6400F is similar to model DP2H-6400F except for model designation, enclosure shape 

heatsink shape and cooling fan number. 

- Model SP410-1D is similar to model DP1H-6400F except for model designation, Tma, output rating, 

dimension of chassis and fan size. 

Technical Considerations 

Equipment mobility : for building-in 

Connection to the mains : N/A 

Operating condition : continuous 

Over voltage category : N/A 

Mains supply tolerance (%) : No direct connection 

Tested for IT power systems : No 

IT testing, phase-phase voltage (V) : N/A 

Class of equipment : Class I (earthed) 

Mass of equipment (kg) : 2.1 

Pollution degree : PD 2

Issue Date: 2004-06-28 

2010-06-22 


IP protection class : IP X0 

The product was submitted and tested for use at the manufacturer's recommended ambient 

temperature (Tmra) of: 50°C(for equipment with C42 rated minimum 105°C),or 40°C(for equipment 

with C42 rated minimum 85°C); Model SP410-1D= 45°C (C42 rated minimum 85°C) 

Engineering Conditions of Acceptability 

For use only in or with complete equipment where the acceptability of the combination is determined by 

Underwriters Laboratories Inc. When installed in an end-product, consideration must be given to the 

following: 

The power shall be derived from the source which is provided with Double or Reinforced insulation 

from AC, mains. Additionally, Abnormal and Component Failure Tests are to be performed in 

combination with the DC-DC power supply to demonstrate that the output of the power supply meets 

the requirements for SELV. 

The following secondary output circuits are SELV: All outputs 

The following secondary output circuits are at non-hazardous energy levels: all outputs except for 12 

V and 5 V outputs of Model SP410-1D. 

The power supply terminals and/or connectors are: Not investigated for field wiring 

The investigated Pollution Degree is: 2 

Proper bonding to the end-product main protective earthing termination is: Required 

The following magnetic devices (e.g. transformers or inductor) are provided with an OBJY2 insulation 

system with the indicated rating greater than Class A (105°C): T3 (Class B), T4 (Class B) 

The following end-product enclosures are required: Fire, Mechanical 

The following secondary output circuits are at hazardous energy levels: Model SP410-1D: 12 V and 

5 V outputs only. 

An investigation of the bonding terminals as protective earthing terminals has: Not been conducted 

The following Production-Line tests are conducted for this product: Electric Strength 

The end-product Electric Strength Test is to be based upon a maximum working voltage of: 75.5 

Vrms, 228 Vpk. (T3 pin 3 to pin 9, 10) 

Additional Information 

N/A 

Markings and instructions

Issue Date: 2004-06-28 

2010-06-22 


Clause Title Marking or Instruction Details 

1.7.1 Power rating - 

Model 

1.7.6 Fuses - 

Rating 

1.7.1 Power 

rating - Company 

identification 

Model Number 

Special Instructions to UL Representative 

N/A 

Production-Line Testing Requirements 

Rated current and voltage and type located on or adjacent to fuse or 

fuseholder. 

Listee's or Recognized company's name, Trade Name, Trademark or File 

Electric Strength Test Special Constructions - Refer to Generic Inspection Instructions, Part AC for 

further information. 

Model Component 

N/A 

Removable 

Parts Test probe location 

V 

rms V dc 

Earthing Continuity Test Exemptions - This test is not required for the following models: 

Electric Strength Test Exemptions - This test is not required for the following models: 

Electric Strength Test Component Exemptions - The following solid-state components may 

disconnected from the remainder of the circuitry during the performance of this test: 

Sample and Test Specifics for Follow-Up Tests at UL 

N/A 

Model Component Material Test Sample(s) 

Test Time, 

s 

Test 

Specifics

Issue Date: 2004-06-28 

2010-06-22 


TABLE: List of Critical Components 

Object/part No. Manufacturer/ type/model technical data CCN Marks of 

trademark 

Conformity 

DC Connector Positronic Industries 

Inc Connector Div 

PLB 06 300 V, 25 A ECBT2 UL (E49351) 

Terminal block Howder Electric Co HD-123 300 V, 25 A XCFR2 UL 

Ltd 

(E112196) 

Power Switch (For Rong Feng Industrial RF-1003 10 A, 250 V WOYR2 UL (E94138) 

models DP1H-6350F, 

DP1H-6400F) 

Co Ltd 

Power Switch (For Rong Feng Industrial RF-1004 16 A, 250 V WOYR2 UL (E94138) 


DP1H-6400F) 

Co Ltd 

Power Switch (For Jackson Electronics JS-608-RL, JS- 10 A, 250 V WOYR2 UL 


DP1H-6400F) 

Industrial Corp 608-RB 

(E107171) 

Power Switch (For Pronic Electronics BR 10 A, 250 V WOYR2 UL 


DP1H-6400F) 

(Shenzhen) Co Ltd 

(E105856) 

Power Switch (For Zippy Technology RE 6 A, 250 V WOYR2 UL (E91274) 


DP1H-6400F) 

Corp 

Power Switch (For Solteam Electronics MR-21 10 A, 250 V WOYR2 UL 


DP1H-6400F) 

Co Ltd 

(E148157) 

Power Switch (For Canal Electronic Co MR series 12 A, 250 V WOYR2 UL (E81103) 


DP1H-6400F) 

Ltd 

Fuse (F1) Various Various Listed, 20 A, 250 V JDYX/ UL 

Fuse (F1) Conquer Electronics 

Co Ltd 

ADA-A, APA T20 A, 250 V JDYX2 UL (E82636) 

P.W.B Various Various V-1 or better, minimum 105 C. ZPMV2 -- 

Y-Capacitor (CY1, CY2, Various Various Line-to-Earth, rated maximum 4700 pF, minimum FOWX2 UL 

CY3) (Optional) 

250 V ac, Class Y1 or Y2, provided with VDE and 

SEV marks. 

Bridge capacitor (CY4) Various Various Rated maximum 2200 pF, minimum 250 V ac, FOWX2 UL 

(Y1 type) (Optional) 

Class Y1, provided with VDE and SEV marks.

Issue Date: 2004-06-28 

2010-06-22 


Object/part No. Manufacturer/ 

trademark 

Storage Capacitor (C42) 

(for Tmra 40°C and 45°C 

used) 

Storage Capacitor (C42) 

(for Tmra 50°C used) 

Photo couplers (U41, 

U43, U4) (U41, U43 

located on U2 board, U4 

located on U1 board) 


U43, U4) (U41, U43 


location on U1 board) 


U43, U4) (U41, U43 




U43, U4) (U41, U43 




U43, U4) (U41, U43 




U43, U4) (U41, U43 




U43, U4) (U41, U43 



-- Electrolytic can 

type 

-- Electrolytic can 

type 

Nec Electronics Corp 

Compound 

Semiconductor 

Device Div 

Panasonic 

Corporation, 

Panasonic 

Corporation Of North 

America 

Sharp Corp 

Electronic 

Components And 

Devices Group 

Fairchild 

Semiconductor Corp 

Cosmo Electronics 

Corp 

Lite-on Technology 

Corp 

Nec Electronics Corp 

Compound 

Semiconductor 

Device Div 

type/model technical data CCN Marks of 

Conformity 

Electrolytic type with integral pressure relief, Rated 

minimum 80 V, 2200 uF to 3300 uF, minimum 85 

degree C 

Electrolytic type with integral pressure relief, Rated 

minimum 80 V, 2200 uF to 3300 uF, minimum 105 

degree C 

-- -- 

-- -- 

PS2561 Series Rated isolation minimum 3000 V ac FPQU2 UL (E72422) 

3171 Rated isolation minimum 3000 V ac FPQU2 UL (E79920) 

PC123 Rated isolation minimum 3000 V ac. FPQU2 UL (E64380) 

H11A817A 

H11A817B 

H11A817C 

Rated isolation minimum 3000 V ac. FPQU2 UL (E90700) 

K1010 Rated isolation minimum 3000 V ac. FPQU2 UL 

(E169586) 

LTV817 LTV817M 

LTV817S 

Rated isolation minimum 3000 V ac FPQU2 UL 

(E113898) 

PS2581 Series Rated isolation minimum 3000 V ac FPQU2 UL (E72422) 

Photo couplers (U41, Toshiba Corp, TLP721 Rated isolation minimum 3000 V ac FPQU2 UL (E67349)

Issue Date: 2004-06-28 

2010-06-22 



trademark 

U43, U4) (U41, U43 




U43, U4) (U41, U43 




U43, U4) (U41, U43 




U43, U4) (U41, U43 



Semiconductor Co 

Discrete 

Semiconductor Div. 

Toshiba Corp, 

Semiconductor Co 

Discrete 

Semiconductor Div. 

Everlight Electronics 

Co Ltd. 

Cosmo Electronics 

Corp. 


Conformity 

TLP621 TLP621-2 

TLP621-3 

TLP621-4 

Rated isolation minimum 3000 V ac FPQU2 UL (E67349) 

EL817 Rated isolation minimum 3000 V ac FPQU2/8 UL 

(E214129) 

KPC817 Rated isolation minimum 3000 V ac FPQU2/8 UL 

(E169586) 

Transistor (Q3) -- -- Rated minimum 45 A, minimum 150 V -- -- 

Transistor (Q4) -- -- Rated minimum 45 A, minimum 150 V -- -- 

Choke (LF1) (Optional) Various Various See enclosure 4-01 for details, rated 130 degree C -- -- 

Choke (T2) (Optional) Various Various See enclosure 4-02 for details, rated 130 degree C -- -- 

Choke (LD1) (Optional) Various Various See enclosure 4-03 for details, 130 degree C -- -- 

Transformer (T3) (for 


DP1H-6400F) 

Main power Electric 

Co., Ltd. 

MP SAF001 Class B, the winding information, see enclosure 4- 

04 for details. 

OBJY2 UL 

-Bobbin Chang Chun Plastics T375J V-0, 150 degree C phenolic, minimum 0.79 mm QMFZ2 UL 

Co., Ltd. 

thick. 

-Insulation tape 3M company 

Electrical Markets Div 

(EMD) 

1350F-1 130 degree C OANZ2 UL 

-Margin tape 3M company 


(EMD) 

44 130 degree C OANZ2 UL 

-Tube Great Holding 

Industrial Co., Ltd. 

TFL 130 degree C YDPU2 UL 

-Varnish Elantas Electrical 

Insulation Elantas 

Pdg Inc 

V1380 130 degree C OBOR2 UL

Issue Date: 2004-06-28 

2010-06-22 



trademark 


Conformity 

-Wire -- -- 130 degree C OBMW2 UL 

Transformer (T3) (for Li Chieh Electronic DASH 2 B-5 Class B, the winding information same as above, OBJY2 UL 


DP1H-6400F) 


except for material see below for details. 


Co., Ltd. 

thick. 



(EMD) 




(EMD) 


-Tube Zeus Industrial TFE-LW, -SW, - 130 degree C YDPU2 UL 

Products Inc TW 



Pdg Inc 

468-2(+) 130 degree C OBOR2 UL 


Transformer (T3) (for Ava Com 

DASH 2 B-5 Class B, the winding information same as above, OBJY2 UL 


DP1H-6400F) 

Technologies Co Ltd 


-Bobbin Chang Chun Plastics T373J, T355J, V-0, 150 degree Cphenolic, minimum 0.79 mm QMFZ2 UL 

Co., Ltd. 

T375J 

thick. 



(EMD) 

56, 1350F-1 130 degree C OANZ2 UL 



(EMD) 







Pdg Inc 

468-2, -27,-7 130 degree C OBOR2 UL 

-Wire -- -- 130 degree C OBMW2 UL

Issue Date: 2004-06-28 

2010-06-22 



trademark 



DP2H-6400F) 



DP2H-6400F) 

Li Chieh Electronic 


Main power Electric 

Co., Ltd. 


Conformity 

DASH 2 B-5 Class B, the winding information and material same 

as above, except for transformer construction, see 

enclosure 4-05 for details. 


MP SAF001 Class B, the winding information and material same OBJY2 

as above, except for transformer construction, see 

enclosure 4-06 for details. 

UL 

B130 Class B, the winding information, see enclosure 4- 

07 for details. 


T373J V-0, 150 degree C phenolic, minimum 0.79 mm 

thick. 

QMFZ2 UL 


Transformer (T4) Taiwan Transmore 

Electronics Co., Ltd. 

-Bobbin Chang Chun Plastics 

Co., Ltd. 

-Insulation tape 3M Company 


(EMD) 

-Insulation tape Nitto Electric 

Industrial Co 

31C 130 degree C OANZ2 UL 

-Margin tape 3M Company 


(EMD) 


-Margin tape Permacel P245 130 degree C OANZ2 UL 



Pdg Inc 

468-2FC+ 130 degree C OBOR2 UL 

-Tube Zeus Industrial 

Products. 

TFE-TW 130 degree C YDPU2 UL 


Transformer (T4) Li Chieh Electronic DASH 2 B-5 Class B, the winding information same as above, OBJY2 UL 




Co., Ltd. 

thick. 

-Insulation tape 3M Company 


(EMD) 


-Margin tape 3M Company 


(EMD) 

44 130 degree C OANZ2 UL

Issue Date: 2004-06-28 

2010-06-22 



trademark 


Conformity 

-Tube Zeus Industrial TFE-LW, -SW, - 130 degree C YDPU2 UL 

Products Inc TW 



Pdg Inc 

468-2(+) 130 degree C OBOR2 UL 


Transformer (T4) Ava Com 

DASH 2 B-5 Class B, the winding information same as above, OBJY2 UL 

Technologies Co Ltd 


-Bobbin Chang Chun Plastics T373J, T355J, V-0, 150 degree C phenolic, minimum 0.79 mm QMFZ2 UL 

Co., Ltd. 

T375J 

thick. 



(EMD) 

56, 1350F-1 130 degree C OANZ2 UL 



(EMD) 







Pdg Inc 

468-2, -27,-7 130 degree C OBOR2 UL 


Transformer (T4) Main power Electric MP SAF001 Class B, the winding information same as above, OBJY2 UL 

Co., Ltd. 


-Bobbin Chang Chun Plastics T375J V-0, 150 degree Cphenolic, minimum 0.79 mm QMFZ2 UL 

Co., Ltd. 

thick. 



(EMD) 




(EMD) 





-Varnish Elantas Electrical V1380 130 degree C OBOR2 UL

Issue Date: 2004-06-28 

2010-06-22 



trademark 


Pdg Inc 


Conformity 


DC Fans (for models 

DP1H-6350F, DP1H- 

6400F) (front) 


DP1H-6350F, DP1H- 



DP1H-6350F, DP1H- 



DP1H-6350F, DP1H- 



DP1H-6350F, DP1H- 


DC Fans (for Model 

SP410-1D) (front and 

rear) 



rear) 



rear) 



rear) 



rear) 


DP1H-6350F, DP1H- 

6400F) (rear) 

Delta Electronics Inc. FUB0412VHN 12 V dc, 0.16 A, 15.79 CFM GPWV2 UL 

(E132003) 

Sanyo Denki Co Ltd 109P0412J3XX( 

@5) (XX= 01-99, 

Sunonwealth Electric 

Machine Industry Co 

Ltd 

12 V dc, 0.35 A, 16.245 CFM GPWV2 UL (E46810) 

(@5) = 3 or blank) 

GM1204PQB1-8A 12 V dc, 0.22 A, 15.3 CFM GPWV2 UL (E77551) 



Ltd 

KD1204PQV1-8A 12 V dc, 0.32 A, 15.3 CFM GPWV2 UL (E77551) 

Nidec Taiwan Corp D04XL-12T2GA 12 V dc, 0.29 A, 15.5 CFM GPWV2 UL 

(E149646) 

Delta Electronics Inc. FUB0412VHN 12 V dc, 0.16 A, 15.79 CFM GPWV2 UL 

(E132003) 

Sanyo Denki Co Ltd 109P0412JXX(@ 

5) (XX= 01-99, 



Ltd 


(@5) = 3 or blank) 

GM1204PQB1-8A 12 V dc, 0.22 A, 15.3 CFM GPWV2 UL (E77551) 



Ltd 


Nidec Taiwan Corp D04XL-12T2GA 12 V dc, 0.29 A, 15.5 CFM GPWV2 UL 

(E149646) 

Sanyo Denki Co Ltd 109P0412H3 (D 

or E)XX(@5) 

(XX= 01-99, (@5) 

12 V dc, 0.195 A, 11.3 CFM GPWV2 UL (E46810)

Issue Date: 2004-06-28 

2010-06-22 



trademark 


DP1H-6350F, DP1H- 

6400F) (rear) 


DP1H-6350F, DP1H- 

6400F) (rear) 


DP1H-6350F, DP1H- 

6400F) (rear) 


DP1H-6350F, DP1H- 

6400F) (rear) 


DP1H-6350F, DP1H- 

6400F) (rear) 


DP1H-6350F, DP1H- 

6400F) (rear) 


DP1H-6350F, DP1H- 

6400F) (rear) 


DP1H-6350F, DP1H- 

6400F) (rear) 


DP1H-6350F, DP1H- 

6400F) (rear) 

DC Fan (for models 

DP2H-6350F, DP2H- 

6400F) (rear) 

DC Fan (for models 

DP2H-6350F, DP2H- 

6400F) (rear) 

Asia Vital 

Components Co Ltd 


Conformity 

= 3 or blank) 

F4020B12H 12 V dc, 0.18 A, 9.7 CFM GPWV2 UL 

(E158191) 

Adda Corp AD0412HBC56 12 V dc, 0.10 A, 10.1 CFM GPWV2 UL 

(E132139) 

Adda Corp AD0412HBC50 12 V dc, 0.10 A, 10.1CFM GPWV2 UL 

(E132139) 

Minebea Motor Mfg 

Corp 

1608KL-04W-B50 12 V dc, 0.11 A, 9.535 CFM GPWV2 UL (E89936) 

Delta Electronics Inc EFB0412VHD 12 V dc, 0.12 A, 10.1 CFM GPWV2 UL 

(E132003) 



Ltd 



Ltd 



Ltd 

KD1204PKBX-8 12 V dc, 0.09 A, 10 CFM GPWV2 UL (E77551) 

KD1204PKVX 12 V dc, 0.13 A, 10.8 CFM GPWV2 UL (E77551) 

KDE1204PQV1- 

8A 




Ltd 


Delta Electronics Inc AFB0612VH 12 V dc, 0.20 A, 30 CFM GPWV2 UL 

(E132003) 

Delta Electronics Inc AFB0612EH 12 V dc, 032 A, 37.60 CFM GPWV2 UL 

(E132003) 

Label -- -- Min. 60 C. PGDQ2 or PGJI2 UL 

Insulating -- -- FEP, PTFE, PVC, TFE, neoprene, polyimide or UZFT2, YDPU2, UL

Issue Date: 2004-06-28 

2010-06-22 



trademark 


Conformity 

Tubing/Sleeving marked VW-1; 105 C, 300 V YDRY2, YDTU2 

Insulation barrier (for Various Various Rated V-2 or better, located between H2 and metal QMFZ2 -- 

model DP1H-6350F, 

DP1H-6400F) 

chassis, see enclosure 4-08 for details. 

Insulation sheet (for Various Various Rated V-2 or better, minimum 0.4mm thick, located QMFZ2 -- 


between PCB U1 and H4, see enclosure 4-09 for 

DP1H-6400F) 

details. 

Insulation sheet (for Various Various Rated V-2 or better, located between mainboard QMFZ2 -- 


and bottom metal chassis, see enclosure 4-10 for 

DP1H-6400F) 

details. 

Insulation sheet (for Various Various Rated V-2 or better, located between mainboard QMFZ2 -- 


and bottom metal chassis, see enclosure 4-11 for 

DP2H-6400F) 

details. 

Heatsink (H2) (for model -- -- Aluminum type, L-shape, overall measured 73 mm -- -- 

DP1H-6350F, DP1H- 

by 34.5 mm by 32 mm high, minimum 1.8 mm thick, 

6400F) 

secured to PWB by solder and screws. 

Heatsink (H3) (for model -- -- Aluminum type, T-shape, overall measured 25 mm -- -- 

DP1H-6350F, DP1H- 

by 60 mm by 32 mm high, minimum 2.0 mm thick, 

6400F) 

secured to PWB by solder. 

Heatsink (H4) (for model -- -- Aluminum type, T-shape, overall measured 25 mm -- -- 

DP1H-6350F, DP1H- 

by 75 mm by 31.5 mm high, minimum 2.0 mm thick, 

6400F) 



DP2H-6350F, DP2H- 

by 65 mm by 55 mm high, minimum 1.5 mm thick, 

6400F) 

secured to PWB by solder and screws. 


DP2H-6350F, DP2H- 

by 18 mm by 61.5 mm high, minimum 2.0 mm thick, 

6400F) 



DP2H-6350F, DP2H- 

by 18.3 mm by 63 mm high, minimum 2.0 mm thick, 

6400F) 


Glue Various Various Provided with C6, U1 board, D12, R3, L8, L4. QMFZ2 -- 

Metal chassis (for model -- -- Plated steel, two pieces of construction, secured -- -- 

DP1H-6350F, DP1H- 

6400F) 

together by screws, see enclosure 4-12 For details. 

Metal chassis (for model -- -- Plated steel, two pieces of construction, secured -- --

Issue Date: 2004-06-28 

2010-06-22 



trademark 


Conformity 

DP2H-6350F, DP2H- 

6400F) 


Metal chassis (for model -- -- Plated steel, two pieces of construction, secured -- -- 

SP410-1D) 


Internal wiring -- -- Primary: FEP, PTFE, PVC, TFE, neoprene or 

surface marked VW-1; rated minimum 80 C, 

300V. Routed away from secondary (SEC, ELV, 

SELV) uninsulated live parts. Secondary: Low 

voltage secondary (SEC, ELV, SELV) rated 

minimum 60 C, 30V, FEP, PTFE, PVC, TFE, 

neoprene, or surface marked VW-1; routed away 

from primary uninsulated live parts, and unless 

insulated for the highest voltage involved, from 

insulated primary circuit wiring. 

AVLV2 UL 

Resistor (RX) (on 

optional EMI board) 

Various Various Rated 510K, 1/2W -- -- 

Capacitor (CX) (on Various Various Rated max. 2.2uF, min. 250Vac, X1 or X2 type, FOWX2, UL 


(Optional) 

provided with VDE or SEV marks. 

Capacitor (CA, CB) (on Various Various Rated max. 2200pF, min. 250Vac, Y1 or Y2 type, FOWX2, UL 


(Optional) 

provided with VDE or SEV marks. 

Varistor (V1) (Optional) Thinking Electronic TVR14471 Rated 300 V ac. VZCA2 UL 

Industrial Co Ltd 

(E314979) 

Varistor (V1) (Optional) Uppermost Electronic V14K300 Rated 300 V ac. VZCA2 UL 

(Alternate) 

Industries Co Ltd 

(E330441) 

Varistor (V1) (Optional) Dongguan Littelfuse SAS-471KD14 Rated 300 V ac. VZCA2 UL 

(Alternate) 

Electronics Co Ltd 

(E322097) 

Varistor (V1) (Optional) Epcos (Zhuhai Ftz) SIOV-S14K300 Rated 300 V ac. VZCA2 UL 

(Alternate) 

Co Lts 

(E321126) 

Varistor (V1) (Optional) Epcos (Zhuhai Ftz) SIOV-S14K320 Rated 320 Vac. VZCA2 UL 

(Alternate) 

Co Lts 

(E321126) 

Varistor (V1) (Optional) Centra Science Corp CNR-14D471K Rated 300 Vac. VZCA2 UL 

(Alternate) 

(E316325) 

Varistor (V1) (Optional) Nippon Chemi-con TND14V-471K Rated 300 Vac. VZCA2 UL 

(Alternate) 

Corporation 

(E323623)

Issue Date: 2004-06-28 

2010-06-22 

Page 16 of 19 Report Reference # E143756-A21-UL

Issue Date: 2004-06-28 

2010-06-22 


Enclosures 

Type Supplement Id Description 

Photographs 3-01 DP1H Top front view 

Photographs 3-02 DP1H Bottom back view 

Photographs 3-03 DP1H side view 

Photographs 3-04 DP1H main board 

Photographs 3-05 DP1H Inside view 

Photographs 3-06 DP1H PWB trace 

Photographs 3-07 DP2H Top front view 

Photographs 3-08 DP2H Bottom back view 

Photographs 3-09 DP2H main board 

Photographs 3-10 DP2H Internal view 

Photographs 3-11 DP2H PWB trace 

Photographs 3-12 Supplement board 

Photographs 3-13 Supplement board trace layout 

Photographs 3-14 SP410-1D Top Front View 

Photographs 3-15 SP410-1D Bottom Back View 

Photographs 3-16 SP410-1D Inside View 

Photographs 3-17 DP2H Internal view with EMI Board 

Photographs 3-18 EMI Board Top 

Photographs 3-19 EMI Board Trace 

Diagrams 4-01 Choke LF1 

Diagrams 4-02 Choke T2 

Diagrams 4-03 Choke LD1 

Diagrams 4-04 Transformer T3 for models DP1H-6350F, DP1H-6400F 



Diagrams 4-07 Transformer T4 

Diagrams 4-08 Insulator between H2 and metal chassis for model DP1H-6350F, 

DP1H-6400F 

Diagrams 4-09 Insulator between PCB U1 and H4 for model DP1H-6350F, DP1H- 

6400F 

Diagrams 4-10 Insulator between H2 and metal chassis for model DP2H-6350F, 

DP2H-6400F 

Diagrams 4-11 Insulator between mainboard and bottom metal chassis for models 

DP2H-6350F, DP2H-6400F

Issue Date: 2004-06-28 

2010-06-22 


Diagrams 4-12 Metal chassis for model DP1H-6350F, DP1H-6400F 

Diagrams 4-13 Metal chassis for model DP2H-6350F, DP2H-6400F 

Diagrams 4-14 Metal Chassis for Model SP410-1D 

Schematics + PWB 5-01 Main Board trace layout 

Schematics + PWB 5-02 U1 board trace layout 

Schematics + PWB 5-03 U2 board trace layout 

Schematics + PWB 5-04 EMI Board trace layout 

Schematics + PWB 5-05 Schematic with EMI Board 

Manuals 

Miscellaneous

File E143756 Vol. X1 Sec. A21 PHO-01 Issued: 2004-06-28



















File E143756 Vol. X1 Sec. A21 DIA-01 Issued: 2004-06-28



File E143756 Vol. X1 Sec. A21 DIA-04(Page 1)Issued: 2004-06-28














File E143756 Vol. X1 Sec. A21 SCH-01(Page 1)Issued: 2004-06-28














File E143756 Vol. X1 Sec. A21 SCH-05 Issued: 2004-06-28

Issue Date: 2004-06-28 Page 1 of 4 Report Reference # E143756-A21-UL 

Revision Date: 2010-06-22 Test Record 

Test Record No. 1 

Unless otherwise noted in the above list of tests, all tests were conducted by KETI under the CB Scheme 

as detailed under CB Certificate Number KR-KETI0216, dated 15-Jun-04. 

The following tests were conducted: 

Test Testing Location/Comments 

Test results are valid only for the tested equipment. These tests are considered representative of the 

products covered by this Test Report. The test methods and results of the above tests have been reviewed 

and found to be in accordance with the requirements in the Standard(s) referenced at the beginning of this 

Test Report.




- The manufacturer submitted representative production samples of Power Supply, Built-In DC/DC (PS4), 

Model SP410-1D.- WTDP: Unless otherwise noted in the above list of tests, all tests were conducted by 

Best Testing Lab., located at Neihu, Taipei, Taiwan under the WTDP program. - Only limited tests were 

performed on Model SP410-1D because of similarity in construction to Model DP1H-6400F previously 

evaluated unit. 






Test Report. 

The following supplements are provided as a part of this Test Record. NOTE: These supplements are only 

available to the Applicant via the CDA system. 


2-01 Test Datasheet 

2-02 CRD




Due to the similarity to the previous construction, only the tests listed above were considered necessary to 

add the EMI board. 






Test Report. 

The following supplements are provided as a part of this Test Record. NOTE: These supplements are only 

available to the Applicant via the CDA system. 


2-03 CRD 

2-04 Datasheet CAP 

2-05 Datasheet Witness




Based on the results of previous investigation, no tests were considered necessary to upgrade report to 

second edition and to correct critical component list by adding varistor description.Since there was no 

construction change to existing product, a CRD document was not needed.

UL TEST REPORT AND PROCEDURE - ZIPPY

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?