cover page for test report - Zippy

Issue Date: 2010-01-29 Page 38 of 69 Report Reference # E143756-A26-UL-2
IEC 60950-1:2005
Clause Requirement + Test Result - Remark Verdict
G ANNEX G, ALTERNATIVE METHOD FOR DETERMINING MINIMUM
CLEARANCES
G.1 Clearances N/A
G.1.1 General N/A
G.1.2 Summary of the procedure for determining
minimum clearances
G.2 Determination of mains transient voltage (V) N/A
G.2.1 AC mains supply ............................................... : N/A
G.2.2 Earthed d.c. mains supply .................................. : N/A
G.2.3 Unearthed d.c. mains supply .............................. : N/A
G.2.4 Battery operation............................................... : N/A
G.3 Determination of telecommunication network
transient voltage (V) :......................................... :
G.4 Determination of required withstand voltage (V) N/A
G.4.1 Mains transients and internal repetitive peaks ..... : N/A
G.4.2 Transients from telecommunication networks ...... : N/A
G.4.3 Combination of transients N/A
G.4.4 Transients from cable distribution systems N/A
G.5 Measurement of transient voltages (V) N/A
G.6 Determination of minimum clearances ................ : N/A
H ANNEX H, IONIZING RADIATION (see 4.3.13) N/A
J ANNEX J, TABLE OF ELECTROCHEMICAL POTENTIALS (see 2.6.5.6) Pass
Metal(s) used .................................................... : Copper or copper alloy. -
TRF No. IECEN60950_1C Underwriters Laboratories Inc.
N/A
N/A
N/A