cover page for test report - Zippy

More documents

Recommendations

Info

Issue Date: 2010-01-29 Page 32 of 69 Report Reference # E143756-A26-UL-2 IEC 60950-1:2005 Clause Requirement + Test Result - Remark Verdict 5 ELECTRICAL REQUIREMENTS AND SIMULATED ABNORMAL CONDITIONS Pass 5.1 Touch current and protective conductor current Pass 5.1.1 General See sub-clauses 5.1.2 to 5.1.6. Pass 5.1.2 Configuration of equipment under test (EUT) EUT has only one mains connection. 5.1.2.1 Single connection to an a.c. mains supply Pass 5.1.2.2 Redundant multiple connections to an a.c. mains supply 5.1.2.3 Simultaneous multiple connections to an a.c. mains supply 5.1.3 Test circuit Using test circuit as in figure 5A. 5.1.4 Application of measuring instrument Using measuring instrument in annex D1. 5.1.5 Test procedure Pass 5.1.6 Test measurements Pass Supply voltage (V) ............................................. : 264 - Measured touch current (mA) ............................. : Maximum 2.3mA - Max. allowed touch current (mA) ........................ : 3.5mA - Measured protective conductor current (mA) ....... : - Max. allowed protective conductor current (mA) .. : - 5.1.7 Equipment with touch current exceeding 3,5 mA N/A 5.1.7.1 General............................................................. : N/A 5.1.7.2 Simultaneous multiple connections to the supply N/A 5.1.8 Touch currents to telecommunication networks and cable distribution systems and from telecommunication networks 5.1.8.1 Limitation of the touch current to a telecommunication network or to a cable distribution system Supply voltage (V) ............................................. : - Measured touch current (mA) ............................. : - Max. allowed touch current (mA) ........................ : - 5.1.8.2 Summation of touch currents from telecommunication networks a) EUT with earthed telecommunication ports...... : N/A TRF No. IECEN60950_1C Underwriters Laboratories Inc. Pass N/A N/A Pass Pass b) EUT whose telecommunication ports have no N/A N/A N/A N/A
Issue Date: 2010-01-29 Page 33 of 69 Report Reference # E143756-A26-UL-2 IEC 60950-1:2005 Clause Requirement + Test Result - Remark Verdict reference to protective earth 5.2 Electric strength Pass 5.2.1 General Pass 5.2.2 Test procedure See table 5.2 Pass 5.3 Abnormal operating and fault conditions Pass 5.3.1 Protection against overload and abnormal operation TRF No. IECEN60950_1C Underwriters Laboratories Inc. See table 5.3 Pass 5.3.2 Motors UL certified DC fan used. Pass 5.3.3 Transformers Transformers are constructed in accordance with Annex C. 5.3.4 Functional insulation.......................................... : Functional insulation complies with the requirements (c). 5.3.5 Electromechanical components N/A 5.3.6 Audio amplifiers in ITE ....................................... : N/A 5.3.7 Simulation of faults See table 5.3. Pass 5.3.8 Unattended equipment N/A 5.3.9 Compliance criteria for abnormal operating and fault conditions During the tests: No fire occurred. No molten metal was emitted. After the tests: Electric strength test primary to secondary and primary to earth were passed. 5.3.9.1 During the tests No fire, emission of molten metal or deformation was noted during the tests. 5.3.9.2 After the tests Electric Strength tests performed after abnormal and fault tests. Pass Pass Pass Pass Pass
Page 1 and 2: Issue Date: 2010-01-29 Page 1 of 2
Page 33: Issue Date: 2010-01-29 Page 31 of 6
Page 85 and 86:
Issue Date: 2010-01-29 Page 4 of 4
Page 87 and 88:
Page 89 and 90:
Page 91 and 92:
Page 93 and 94:
Page 95 and 96:
Page 97 and 98:
Page 99:
show all

cover page for test report - Zippy

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?