cover page for test report - Zippy

More documents

Recommendations

Info

Issue Date: 2010-01-29 Page 20 of 69 Report Reference # E143756-A26-UL-2 IEC 60950-1:2005 Clause Requirement + Test Result - Remark Verdict For an a.c. mains supply .................................... : N/A For a d.c. mains supply ...................................... : N/A b) Transients from a telecommunication network N/A 2.10.4 Creepage distances See TABLE: 2.10.3 and 2.10.4 Pass 2.10.4.1 General Pass 2.10.4.2 Material group and comparative tracking index Pass CTI tests ........................................................... : Material group IIIb; 100
Issue Date: 2010-01-29 Page 21 of 69 Report Reference # E143756-A26-UL-2 IEC 60950-1:2005 Clause Requirement + Test Result - Remark Verdict Two wires in contact inside wound component; angle between 45° and 90° ................................ : 2.10.5.13 Wire with solvent-based enamel in wound components TRF No. IECEN60950_1C Underwriters Laboratories Inc. Physical separation in the form of insulating sleeving provided to relieve mechanical stress at the crossover point. Electric strength test .......................................... : - Routine test N/A 2.10.5.14 Additional insulation in wound components Thin sheet insulation provided for reinforced insulation. See Sub clause 2.10.5.6. Working voltage ................................................ : (see appended table 2.10.3 and 2.10.4) - Basic insulation not under stress ...................... : N/A Pass N/A Pass Pass - Supplementary, reinforced insulation ................ : See Sub clause 2.10.5.6. Pass 2.10.6 Construction of printed boards Pass 2.10.6.1 Uncoated printed boards Pass 2.10.6.2 Coated printed boards N/A 2.10.6.3 Insulation between conductors on the same inner surface of a printed board 2.10.6.4 Insulation between conductors on different layers of a printed board Distance through insulation N/A Number of insulation layers (pcs)........................ : N/A 2.10.7 Component external terminations The mechanical arrangement and rigidity of the termination with an insulating coating is adequate. 2.10.8 Tests on coated printed boards and coated components 2.10.8.1 Sample preparation and preliminary inspection N/A 2.10.8.2 Thermal conditioning N/A 2.10.8.3 Electric strength test N/A 2.10.8.4 Abrasion resistance test N/A 2.10.9 Thermal cycling N/A 2.10.10 Test for Pollution Degree 1 environment and insulating compound N/A N/A Pass N/A N/A
Page 1 and 2: Issue Date: 2010-01-29 Page 1 of 2
Page 21: Issue Date: 2010-01-29 Page 19 of 6
Page 73 and 74:
Issue Date: 2010-01-29 Page 2 of 10
Page 75 and 76:
Page 77 and 78:
Page 79 and 80:
Page 81 and 82:
Page 83 and 84:
Page 85 and 86:
Page 87 and 88:
Page 89 and 90:
Page 91 and 92:
Page 93 and 94:
Page 95 and 96:
Page 97 and 98:
Page 99:
show all

cover page for test report - Zippy

Create successful ePaper yourself

Delete template?

Save as template?