cover page for test report - Zippy

More documents

Recommendations

Info

Issue Date: 2010-01-29 Page 14 of 69 Report Reference # E143756-A26-UL-2 IEC 60950-1:2005 Clause Requirement + Test Result - Remark Verdict 2.5 Limited power sources N/A a) Inherently limited output N/A b) Impedance limited output N/A c) Regulating network limited output under normal operating and single fault condition d) Overcurrent protective device limited output N/A Max. output voltage (V), max. output current (A), max. apparent power (VA) ................................. : Current rating of overcurrent protective device (A): - TRF No. IECEN60950_1C Underwriters Laboratories Inc. N/A -
Issue Date: 2010-01-29 Page 15 of 69 Report Reference # E143756-A26-UL-2 IEC 60950-1:2005 Clause Requirement + Test Result - Remark Verdict 2.6 Provisions for earthing and bonding Pass 2.6.1 Protective earthing Accessible parts (chassis) are earthed. 2.6.2 Functional earthing SELV circuits. Pass 2.6.3 Protective earthing and protective bonding conductors TRF No. IECEN60950_1C Underwriters Laboratories Inc. Pass Appliance Inlet used. Pass 2.6.3.1 General Pass 2.6.3.2 Size of protective earthing conductors No power cord provided. N/A Rated current (A), cross-sectional area (mm²), AWG ................................................................ : 2.6.3.3 Size of protective bonding conductors Protective bonding evaluated based on 2.6.3.4. Rated current (A), cross-sectional area mm²), AWG ........................................................................ : 2.6.3.4 Resistance of earthing conductors and their terminations; resistance (ohm), voltage drop (V), test current (A), duration (min)............................ : Earth Pin of terminal to Chassis 1: Test Current=25A, resistance=16.2m ohm. 2: Test Current=40A, resistance=14.4m ohm. 2.6.3.5 Colour of insulation ............................................ : Green / Yellow wire from AC inlet to chassis. The wire is reliably fixed to the chassis with star washer and screw. 2.6.4 Terminals Appliance inlet used. Pass 2.6.4.1 General Pass 2.6.4.2 Protective earthing and bonding terminals Pass Rated current (A), type, nominal thread diameter (mm)................................................................. : 2.6.4.3 Separation of the protective earthing conductor from protective bonding conductors Complies with the test of 2.6.3.4 Detachable power cord. Power Cord not provided. Appliance inlet has earthing terminal. 2.6.5 Integrity of protective earthing Pass 2.6.5.1 Interconnection of equipment Equipment contains a protective bonding conductor to maintain continuity of protective earthing circuits to other equipment through a standard outlet that complies with IEC 60320. - N/A - Pass Pass - N/A Pass
Page 1 and 2: Issue Date: 2010-01-29 Page 1 of 2
Page 15: Issue Date: 2010-01-29 Page 13 of 6
Page 67 and 68:
Issue Date: 2010-01-29 Page 65 of 6
Page 69 and 70:
Page 71 and 72:
Page 73 and 74:
Page 75 and 76:
Page 77 and 78:
Page 79 and 80:
Page 81 and 82:
Page 83 and 84:
Page 85 and 86:
Page 87 and 88:
Page 89 and 90:
Page 91 and 92:
Page 93 and 94:
Page 95 and 96:
Page 97 and 98:
Page 99:
show all

cover page for test report - Zippy

Create successful ePaper yourself

Delete template?

Save as template?