Haris General Contracting L.L.C

Company Profile Of
Haris General Contracting L.L.C
A Division of Al-Uliya Group of Companies
Beyond The Perfection
P O Box No# 76329 Abu Dhabi United Arab Emirates
P.O Box No# 76329, Abu Dhabi-United Arab Emirates
Tel# 02 5543788 Fax# 02 5527101
Mobile# 055-2919573 / 052-7200912
Email: enquiry@harisgcllc.com

Table Of Contents
Introduction
Areas of Expertise
Mission & Vision Policy
Organizational Organizational Structure
CV of Personnel's
Infrastructure Details
Safety Policies
Projects Projects
Licenses and Certifications
References

Dear Sir/Madam,
Introduction
We are pleased to introduce our company Haris General Contracting
L.L.C, based in Abudhabi, U.A.E, a service oriented and professionally
managed company engaged in the commercial and industrial sector.
Haris General Contracting L.L.C. aims to establish a close working
relationship p with all their associates by y fully y understanding g the
requirement of each particular project and provide a responsive and
inventive design service that fully respects the clients’ budget, quality
and time frame. Haris General Contracting L.L.C. maintains a strong
reputation for providing cost effective construction solution. solution
It will be our pleasure to welcome your enquiries for any of the below
works you may require, which will receive our best attention in
executing the order to your utmost satisfaction in terms of extreme
quality, lit reasonable bl price i and d qualified lifi d erection. ti If you require i any
further information/clarification, please feel free to contact the
undersigned.
For Haris General Contracting L.L.C
T.Anpalagan
Managing Director

Areas Of Expertise
11.Haris .Haris H i General G l Contracting C t ti LLC
LLC
CIVIL Oriented
We are undertaking the following types of Civil oriented contracting
works: k
1. Block Work
2. Plastering and Painting works
3. Tiles and Granite Fixing & all types of Ceiling works
4. Wooden doors, Fire rated Steel doors and Glass doors
5. Fabrication &Erection of Cladding works(MS, SS and
Aluminum)
6. Hardscaping and landscaping
7. Fixing Road studs and bollards
8All 8. All type of fF Fencing i works. k
9. All types of maintenance works.
10.All kinds of Galvanizing works.
M.E.P Oriented
We are doing following types of MEP related works:
11.Installation Installation of Mechanical Plants
2.Plumbing & Industrial Electrical related works
3.MEP Annual Maintenance Services
5.Fabrication &Erection of Duct, Chilled water pipes , Air-
Conditioning
and Fire Fighting works, etc.
6.All types of Installation jobs.

2. 2.Al Al-Uliya Uliya Electronic & Appliances L.L.C
Introduction
We would like to introduce our company to your reputable
organization in parking management, car parking systems as a
subsidiary of Al-Uliya Electronics & Appliances L.L.C.
Al Uliya Electronic & Appliances L.L.C was established in
Abudhabi and one of the market leader in the market leader in
Aluminium &Glass fabrication. Al-Uliya Electronic & Appliances
L.L.C.(Automation)is managed by Graduate, engineers and
technicians hii who h have h several lyears of fproject j experience i in i the h
U.A.E. We supply and install the following items with the intended
purpose of carrying outpost-sales maintenance services:
Services
1. Garbage Chute
2. Car Park Barriers / Bollards/Paid parking system/parking
solution /Column & Conner guard
3. Access Control (magnetic keys, magnetic cards, radio remote,
transponders, Proximity cards)
4. Garage Doors & High speed doors (sectional as well as tilt onepiece
type)
5. Motorized Gates (hinged as well as sliding types)
6. Sliding Doors (malls, airports, office entrances)
7. Electronic Data Display Boards (airports, theatres, sports
grounds)
Metal cladding on any type of doors
8. Magnetics looks & Electronic looks
9. Provides round-the-clock preventive & corrective maintenance
services to all makes of lifts. Spare parts for most makes are
obtained from various sources in Europe, USA and East countries

CCar PPark kBBarriers i / /G Gates t
Supplies barriers from Italy (FAAC, CAME, DASPI) and
Canada (CPE) - all of high quality electro- hydraulic/electro
mechanical drive system for intensive application/Industrial
application. li i Beam B length l h includes i l d articulated i l d 2-piece 2 i beam, b
and ranges from 2.0 to 12.0 meters in length.
Access Control
Al Uliya Electronic & Appliances L.L.C Supply & Install
any of the following systems:
Magnetic keys with magnetic key readers (Italy/Spain)
Magnetic cards with magnetic card readers (**USA/Italy,
South Africa)
Digital radio remote control systems (USA, /Italy, South
Africa, Germany)
Transponders - whereby vehicle gains access without use of
any of the above systems
Unipark, remote control, for reserved car parking slots
**Worth noting an important feature in the US product is its ability in
cancelling and re-validation of cards.
In Access Control - we provide entry with the following
features:
radio-controlled transmitters
touch card magnetic readers multi-purpose entry
touch card magnetic readers with true anti-pass back entry
proximity card readers

Motorizing of Gates / Garages
Al Uliya Electronic & Appliances L.L.C supplies complete
garage systems (by Advanced Doors Systems from New
Zealand) either with manual or power (remote) operated doors, in
sectional or tilt type (one piece) door, as well as industrial door \
hardware supplied from USA Gates Atomization which includes
sliding gates on tracks or hinged swing gates for residences and
villas.
Garbage Chute
1.Offset for Chute Bottom
2.Chute Tube
3.Automatic Flushing Spray Head
4.Stainless Steel Chute Head Plate.
5.Inspection Access Door
6.Garbage Trolley
7.Axial Blowing Exhauster
8.Bird and Insect Screen
9.Bottom Hinged Door
10.Disinfecting and sanitizing Apparatus
11.Draft Control Mesh
12.Glass Bulb Sprinklers
13.Control Panel
14.Compactor (Optional as per clients requirement)
15.Automatic Brush Motor (Optional as per clients requirement)
.

Personnel
Our Goal is to exceed the expectations of every client by offering
outstanding t t di services i iincreased d flexibility fl ibilit and d grater t value, l thus th
optimizing the systems functionality and improving operation efficiency
. As such we are confident of providing you the kind of services you
exactly want at an affordable cost with the help of our dedicated and
qualified q team.
Regular staff training sessions to staff in Europe and Far East takes
place each year to keep up with every new technology. We are open to
discuss a mutual agreement with you, should be interested of
cooperating with us. us
Thanking you for spending your valuable time to read this company
profile and we now look forward to start a business relationship with
your y Organization g
Al Uliya Electronic & Appliances L.L.C

Mission:
Policies
The committed members of Team Haris share the common mission
and are determined to:-
1.Become one of the leaders in General, Civil as well as MEP
Company preferred by Clients, Projects Managers and
consultants of the Gulf Regions
22.To To attain total professionalism
3.To strive & sustain Total Quality Management (TQM) system
4.To sustain & enlarge the list of fully satisfied clients with zero
complaints
Vision:
To become a global player in the sector, signing under the prestigious
projects for tomorrow’s world of business, harmonizing innovative and
progressive technology with its experience, excellence and high high-caliber caliber
work.
Our Strengths:
11.Professionally P f i ll Qualified Q lifi d and d experienced i d Management M Team T
2.Strong team of Skilled workforce
3.One aim, one target
4.Result-oriented approach
5.Friendly, y, but pprofessional relationship p

Engineering
Dept.
Work Force
Organizational Structure
Managing Director
Finance Dept:
General Manager HR and d
Administration
Project Manager
Work Force
Contracts and
Procurement
Dept.

Infrastructure
Sr #. Plant & Machinery Capacity Nos
1. Welding Machine NA 6
2. Generators NA 2
3. Bobcats NA 1
44. CCompressors NA 1
5. Bar Bending Machines NA 1
6 Bar Cutting Machines NA 1
7 Loadalls NA 1
8 Drilling Machine NA 4
9 Fire Fighting System NA 1
10 JCB NA 1
11 Coring Machine NA 4
12 Multi Scabbler Machines NA 1
13 Plate Compactor 2.5 Tons 1
14 Voltage Convertor NA 2

Safety Policies
I. OBJECTIVE
The Safety yPolicy y of Haris General Contracting g L.L.C is designed g to
comply with the Standards of the Occupational Safety and Health
Administration, and to endeavor to maintain a safe and injury/illness
free workplace.
II II. POLICY
It is company policy that accident prevention be a prime concern of all
employees. This includes the safety and well-being of our employees,
subcontractors, and customers, as well as the prevention of wasteful,
inefficient operations, p , and damage g to property p p y and equipment. q p
III. APPLICABILITY
This Safety Policy applies to all employees of Haris General Contracting
L.L.C, regardless of position within the company. The Safety Rules
contained ti dh herein i apply l to t all llsubcontractors b t t and danyone who h is i on a
company project site. Every employee is expected to comply with the
Safety Policy, as well as OSHA Health and Safety Standards.
IV. BASIC SAFETY RULES
A. Compliance with applicable federal, state, county, city, client, and
company safety rules and regulations is a condition of employment.
B. All injuries, regardless of how minor, must be reported to your
supervisor and the Safety Office immediately. An employee who fails to
fill out t a "Notice "N ti of f Injury I j Form" F " and d send d it to t the th Safety S f t Office Offi can be b
issued a safety violation notice and may be subject to termination, in
accordance with company policy. In the event of an accident involving
personal injury or damage to property, all persons involved in any way
will be required q to submit to drug gtesting. g
C. times. Alterations or modifications of the hat or liner are prohibited.
Crane operators, when in an enclosed cab, have the option of not wearing
a hard hat due to the possible obstruction of view.

D. Safety glasses will be worn as the minimum-required eye
protection at all times. Additional eye and face protection such as
mono-goggles and face shields are required for such operations as
grinding, jack hammering, utilizing compressed air or handling
chemicals, acids and caustics. Burning goggles for cutting, burning or
brazing and welding hoods for welding, etc., are required.
E. Fall Protection Requirements
1Fllbd 1. Full body harnesses h and dl lanyards d shall hllb be worn and dsecured dany
time there is a fall hazard of more than six (6) feet.
2. Lifelines shall be erected to provide fall protection where work is
required in areas where permanent protection is not in place.
Horizontal lifelines shall be a minimum of 2-inch 2 inch diameter wire rope. rope
Vertical lifelines shall be 3/4 inch manila rope or equivalent and shall
be used in conjunction with an approved rope grab.
3. Structural steel erectors are required to "hook up" with full body
harness and lanyard.
4. Employees using lanyards to access the work or position
themselves on a wall or column, etc., must use an additional safety
lanyard for fall protection.
5. Man lifts must be used properly. As soon as an employee enters an
articulating boom lift and before the lift is started, the employee must
put on the harness and attach the lanyard to the lift. Employees are not
required to wear harnesses on scissor lifts.
F. Clothing must provide adequate protection to the body. Shirts must
have at least a tee sleeve. Shirts with sleeves and long pants will be
worn at all times. No shorts are to be worn on projects. All
employees, except welders and burners, must tuck shirt tails inside
trousers. Burners and welders will not be permitted to wear polyester
or nylon l clothing. l thi St Sturdy d work k bboots t with ith rigid, i id slip li resistant i t t soles l are
required. No clogs, tennis shoes or loafers are permitted. Steel-toed
tennis shoes with the ANSI label are the only alternative to the leather
work boot.

G. All personnel will be required to attend safety meetings as stipulated
by project requirements in order to meet OSHA Safety Standards.
HH H. Housekeeping k i shall hllb be an integral i lpart of fevery job. jb
Supervisors\foremen\lead men and employees are responsible for
keeping their work areas clean and hazard-free. Clean up is required
when a job is finished at the end of the day
II. Burning and cutting equipment shall be checked daily before being
used. Flash back arresters shall be installed at the regulators on both
oxygen and LP bottles. All gas shall be shut off and hoses disconnected
from bottles and manifolds at the end of the work day. Caps shall be
replaced on bottles when gauges are removed. When gauges are
removed and caps replaced, the oxygen and LP bottles shall be separated
into storage areas no less than 20 feet apart with a “No Fire or Smoking"
sign posted and a fire extinguisher readily available. Makeshift field
repairs p will not be allowed.
K. All extension cords, drop cords, and electrical tools shall be checked,
properly grounded with ground fault interrupters (GFI’s).
L. All scaffolding and work platforms must be built and maintained in
accordance with OSHA specifications. All ladders must be in safe
condition without broken rungs or split side rails.
M. Scaffold Tag System: 1. Green tags are to be placed on 100
percent complete scaffolds with all braces, locks and hand, mid, and
toe rails in place p before use.
2. Yellow tags indicate incomplete scaffolds. If scaffold is missing a
hand, mid, or toe board, it must have a yellow tag and employees on it
must be tied off at all times.
3. Red tags indicate scaffolds that are in the process of either being
erected or disassembled. These scaffolds are not to be used at any
time & Scaffold tags should be placed in a highly visible location on
the scaffolds for all employees to see.

COMPLETED
PROJECTS

Supply & Installation of Double Skin sandwich Panel Animal
Shed 15mX10m height 3.0m for EAD , Abu Dhabi.

Supply & Installation of Single Crank
40Cm buried 2.9m 3.0/4.0mm Mesh with
3 lines barbed wire Fencing System for
EAD, , Abu Dhabi @ @Al Faya y wild Animal
farm.

Repair & Re installation of fallen
Animal Sheds EAD, Abu Dhabi @
Al Faya wild Animal farm.

Installation of Fencing System @
for H.H. Crown Palace SKY DIVE Margham

Supply & Installation of Marine
Grade Aluminium Road Stud @ Burj Khalifa.
Supply & Installation of
Marine Grade
Aluminium Road Stud @
BBurjjKh Khalifa. lif

Supply & Installation of 2M ,PVC 50X50 mm ,Chain Link Fencing
with Gate System for 50 Camel Farms , for Ateeq Bin Qanoun for
Heritage@ Al Tayeb ( Al Kattam), Abu Dhabi.

Supply & Installation of Fencing Sys 3m height 3.2mm mesh
for H.H. Crown Palace ,Dubai.

Supply & Installation of 2M ,PVC 50X50 mm ,Chain Link Fencing
with 3 lines barbed wire & Gate System , for Eco Range @ Al Faya
animal Farm for Petrol Station , Abu Dhabi.

D H F Fencing 3m height 33.5 5 mm G I Mesh (250Cm
above ground 50Cm buried) from Eco Range
Supply & Installation of 3 M 3 55 mm thick GI mesh 25M
Supply & Installation of 3 M ,3.55 mm thick GI mesh 2.5 M
above ground 50Cm buried Chain Link Fencing System , for
Eco Range @ DHF, Abu Dhabi.

Supply & Installation of PVC coated Chain Link Fencing
System &Gates for farms , for Trojan General Contracting
L.L.C, @ Rawdat Al Reef Palace , Abu Dhabi.
“Th

Supply & Installation of 19mm clear Tempered Glass water feature &
30mm Laminated clear round Glass for lighting System. @ Mirdif
City Centre, Dubai.

S l &I tllti fSSBll d f AlT St k LLC
Supply & Installation of SS Bollards for Al Tayer Stocks L.L.C.
@ Bloomingdale’s in Dubai Mall, Dubai.

Supply & Installation of Car Parking system for Power plus Electro
mechanic LLC L.L.C.
Sample Fencing & Gate System
Supply of 2.5 mm GI fencing
SSystems FFor AlNjh Al Najah
Electromechanical works L.L.C.

Supply & Installation of Animal shed for Eco Range
@ Al Faya animal Farm, Abu Dhabi.

Supply & Installation of 3 M height with 50Cm crank Fencing System
pp y g g y
with 4 lines Barbed wire @ Khaleefa Hamdan Khaleefa Hamad, Al
Sharjah.

Supply & Installation of Marine Grade Aluminium Road Stud for
EMAAR@ Dubai Mall, Dubai.

Anwar Tower
Al-Burj Hotel
JBR
Dubai
Al-Zahara Hospital
British Bank, Dubai
Mirdif Villa
RAK Tower Project
Abudhabi
MEP
Project Type Of Job
Duct Mounted A/C erection and
related works.
Fabrication and installation of CHW
pipes and cladding jobs.
Pump p Installation
Swimming pool Installation and
Landscaping works
CHW pipe and cladding job.
Ducting, pumping and cladding
A/C maintenance
Plumbing
MEP Works

Trade Licenses
PROJECTS
UNDERTAKEN BY
PARENT
COMPANIES

Our Banks
REFERENCES
Abu Dhabi Commercial Bank
Al Quasis Branch, Dubai.
Contact : Mr. Luxmy Varma(RM)
Telephone: +971 507595498
RAK Bank,
Al Quasis Br, Dubai.
CContact t t : MMr. SSuteej t j
Telephone: +971502917578