9 Fusing Copy 02/11 - Franciscan Glass
9 Fusing Copy 02/11 - Franciscan Glass
9 Fusing Copy 02/11 - Franciscan Glass
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
CARBON RODS<br />
Catalog # BD-CR316 3 /16”<br />
Catalog # BD-CR14 1 /4”<br />
Catalog # BD-CR38 3 /8”<br />
Catalog # BD-CR12 1 /2”<br />
Catalog # BD-CR34 3 /4”<br />
Catalog # BD-CR1 1”<br />
BEAD MANDRELS<br />
Catalog # BM<strong>11</strong>69<br />
Catalog # BM<strong>11</strong>69 B<br />
Catalog # BM<strong>11</strong>612<br />
Catalog # BM3329<br />
Catalog # BM33212<br />
Catalog # BM1812<br />
TUNGSTON RODS<br />
Catalog # BD-TR<strong>11</strong>6<br />
Catalog # BD-TR332<br />
Catalog # BD-TR18<br />
SLUDGE PLUS<br />
Catalog # BMS ( 3 /4 LB. )<br />
Catalog # BMS3 ( 3 LB. )<br />
MANDREL ROD REST<br />
Catalog # BMR<br />
MANDREL TAIL STOCK HOLDER<br />
Catalog # BMTSH<br />
MANDREL PIN VISE<br />
Catalog # BMV<br />
BEAD BLANKET<br />
Catalog # BD-CM<br />
BEAD FINGERS<br />
Catalog # BD-FS ( small )<br />
Catalog # BD-FM ( medium )<br />
Catalog # BD-FL ( large )<br />
BEAD CLEANING BRUSH<br />
Catalog # BD-CB<br />
BEADING TOOLS<br />
1 /16“ x 9” LONG<br />
1 /16“ x 9” ( with brass handle )<br />
1 /16“ x 12” LONG<br />
3 /32“ x 9” LONG<br />
3 /32“ x 12” LONG<br />
1 /8“ x 12” LONG<br />
1 /16”<br />
3 /32”<br />
1 /8”<br />
Used as reamers, shapers, polishers, holders,<br />
marvels, etc. Can be sharpened like a pencil or<br />
carved on to press patterns into hot glass. 12” long.<br />
Stainless steel rods with nicely<br />
pressed rounded ends. Sold by<br />
the dozens. BM-<strong>11</strong>69B has a<br />
brass sheath that covers two<br />
thirds of the handle. Large<br />
diameter is easier to hold and is<br />
more ridged.<br />
7” long rods best used with BMV pin vise to use as a<br />
rake . Both ends are ground to points. One end is<br />
long taper with other a short taper.<br />
Coating for mandrels so bead will not stick to<br />
mandrel even on beads taking two hours to make.<br />
Holds 10 rods and/or tools 7 1 /2” long.<br />
Wooden handle at one end with a brass rod with cup<br />
shape on opposite end. To be used with tail stock in<br />
one hand and manral in other to steady bead.<br />
3 Jaw chuck mounted on wood handle. For use with<br />
Rods up to 5 /16” in diameter.<br />
Place your beads between these thick ceramic fiber<br />
blankets after flame annealing to help reduce<br />
thermal shock. Size 6” x 12”.<br />
“Hot fingers”, a sliding collar closes stainless steel<br />
fingers. Small is ideal for buttons, medium is for<br />
marbles up to 1 1 /2” and large is for small goblets.<br />
Double ended brush ideal for cleaning mandrel<br />
release from any bead hole which is 3 /32“ and larger.<br />
01-07 9-3