9 Fusing Copy 02/11 - Franciscan Glass

TORCH MOUNTED MARVER
Catalog # HHTM ( For hot head torch ( HHT )
Catalog # NOR-MBM
(For “minor” burner (NOR MBM)
TORCH REGULATORS AND HOSE
GRAPHITE MARVERING PAD
Catalog # GP5 5” x 5””
Catalog # GP6 6” x 6”
GRAPHITE MOLDS
Catalog # GP3812 3 /8” and 1 /2”
Catalog # GP5834 5 /8” and 3 /4”
Catalog # GP781 7 /8” and 1”
Catalog # GP114 11 /4”
Catalog # GP112 11 /2”
TORCH ACCESSORIES
Catalog # BD-HOSE 12’ Torch hose
Catalog # BD-REG-O Torch regulator (Oxygen)
Catalog #BD-REG-P Torch regulator (Propane)
GRAPHITE PADDLES
Catalog # GP15 11/2”x1 1 /2”
Catalog # GP152 1 1 /2” x 2”
Catalog # GP1525 1 1 /2”x2 1 /2”
Catalog # GP2 2”
Catalog # GP215 2” x 1 1 /2”
Catalog # GP23 2” x 3”
Catalog # GP2515 2 1 /2”x 1 1 /2”
Catalog # GP3 3”
Catalog # GP32 3” x 2”
Catalog # GPS Shaping Paddle
Catalog # GP225 Graphite Paddle 2” X 2 1 /2”
GROOVED MARVERING PAD
Catalog # BD-M 2” x 4”
Marvering pad mounts to torch near
the flame. 2 lips located on the
marver are used to hold small items
and to preheat millefiori.
Twin lead flexible tubing. Grade T rated for all types of fuel
gases and oxygen. Propane will eventually rot standard
grade R welding hose. Longer hoses available. Please
specify which torch you have. A 5/16” or 3/8” BB hose set
is recommended when connecting large manifolds to
regulators.
Torch Regulator (Oxygen)- BD-REG-O
GRAPHITE PADDLES, PADS & MOLDS
High quality graphite paddles have
an approximate 6 1 /2” handle colored
with a high temperature rubber
cover. Measurements are width by
height.
High quality graphite work surface
for marvering. Also can be used as
a kiln shelf which does not require
kiln wash.
Aluminum grounded surface.
Beads and marble molds have a half
cylinder and half sphere pattern for
each size except for large GP112 and
GP114 which have only half sphere.
9-2 01-07