intro to V230

ePAPER READ

DOWNLOAD ePAPER

wimo.com

You also want an ePaper? Increase the reach of your titles

YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.

START NOW

Let`s measure a 10MHz XTAL

Connect the XTAL to the DUT connector and find at what frequency it has the lowest

impedance.

You may need to Zoom the frequency range a couple of times. The Q and Bandwidth can

be found where the Phase is 45°

Die breitbandige Mobil- / Portabelantenne CHAMELEON ... - WiMo

Sender finden mit dem automatischen Peiler TSCM-2020

WiMo W-312 und Kelemen DP-WARC: WARC-Sperrkreisdipole ...

Let`s measure a 10MHz XTAL Connect the XTAL to the DUT connector and find at what frequency it has the lowest impedance. You may need to Zoom the frequency range a couple of times. The Q and Bandwidth can be found where the Phase is 45°

Finally let’s look at a 28MHz Band Pass in Transmission Mode Connect the filter between DUT and DET. If it has an Insertion Loss you can compensate it in the Loss Offset box. To view the 3/6/10dB Bandwidth, just set both markers and enable the BW&Q. GERD 16.6.07 STEWART 12.6.07 mini-VNA distributed by: WiMo Antennen und Elektronik GmbH Am Gäxwald 14, D-76863 Herxheim Tel. (07276) 96680 FAX 9668-11 http://www.wimo.com e-mail: info@wimo.com

Page 1 and 2: Introduction to the new software V2
Page 3 and 4: If the Autoscale Loss box is unchec
Page 5: SAVE MEASUREMENT As with the previo

intro to V230

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?