intro to V230
intro to V230
intro to V230
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Note: The results of the Calibration and Configuration will be saved in the .CFG file<br />
until the procedure is repeated. Close the program now and restart checking the<br />
Antenna Mode with a good 50 Ohm Resis<strong>to</strong>r and the Transmission Mode with the<br />
short cable.<br />
CABLE LENGTH<br />
An au<strong>to</strong>mated Cable Length measuring function has also been added.<br />
Connect the unknown cable <strong>to</strong> the DUT connec<strong>to</strong>r, then click the “Find Au<strong>to</strong>matically”<br />
but<strong>to</strong>n.<br />
It will take some seconds until you see the correct length. The cable length is calculated<br />
from adjacent Phases at +90° and dependant from production <strong>to</strong>lerances of the Velocity<br />
Fac<strong>to</strong>r.<br />
It is still possible <strong>to</strong> set the needed 2 Markers and measure manually. Do not try <strong>to</strong><br />
measure with a Single Sweep.