Voith Valvex Solenoid for Hazardous Locations - Voith Turbo

Voith Valvex Solenoid
for Hazardous Locations
Proven technology
The Electronic Drive Systems product
group at Voith Turbo GmbH
& Co. KG develops and produces
explosion­proof Valvex solenoid
valves and valve assemblies.
You can take advantage of all the
experience we have gained from
more than over 40 years designing
and constructing valves for hazardous
locations.
The benefits to you:
n Proven over many years in
refrigeration business
n Applicable for offshore applications
n Conforms to the requirements for
electrical equipment to be used in
zone 1 gas explosion hazard
zones
n Type of protection "d" for sole noid
and "e" for terminal chamber
n All common supply voltages (AC
or DC) available
n Suitable for use with various
valves (Danfoss, Seitz, Hansen,
Valvex etc.)
n Modular design principle regarding
mechanical and electrical
combinations
n Complete assemblies (solenoid
actuator and valve) available
All the world‘s our home
Valvex valve technology is used
worldwide in refrigeration systems,
where explosion protection and
reliability are the key criteria.
Voith Turbo‘s worldwide distribution
and service network means that
wherever you are, we are not far
away.

Voith Turbo GmbH & Co. KG
Electronic Drive Systems
Voithstr. 1
74564 Crailsheim, Germany
Tel. +49 7951 32 ­470
Fax +49 7951 32 ­605
turcon@voith.com
www.voithturbo.com/valvex­valves
Approvals
n World­Wide: International Electrotechnical
Commission, IEC Certification Scheme for Explosive
Atmospheres, IECEx BVS 10.0005
n European Union: EC type­examination certificates
referred to directive 94/9/EG, BVS 03 ATEX E349
n Republic of Korea (South Korea): KGS, Korea Gas
Safety Corporation, KGS 10­GA6BO­0013
Technical data solenoid V-0-EN II
Rated voltage 12, 24, 48, 110, 230 V AC/DC ±10 % (other voltages on request)
Rated frequency of AC power supply up to 60 Hz
Type of protection II 2G Ex de IIC T4 or II 2G Ex de IIC T5
Ambient Temperature Temperature class T4 -50 °C to +70 °C
Temperature class T5 -50 °C to +40 °C
Rated sustained power Temperature class T4 max. 21 W
Temperature class T5 max. 16.5 W
Nominal operating mode Continuous operation, 100 % operating time
Electrical connection Clamp-type terminals
Housing material Aluminium (hot hardened) / stainless steel
Mass 1.7 kg / 3.4 kg
Applications Features
n Actuation of valves in hazardous locations, particularly suitable for n Use in hazardous locations
many Danfoss, Seitz, Hansen and Valvex valves
n Type of protection „d“ (flameproof enclosure) for solenoid and
n Actuation of valves from other manufacturers on request
„e“ (increased safety) for terminal chamber
n Actuation of valves for offshore business available
111
ø15
A
105
78
60
105
View A
M5, 13 deep
cr375en, S&F/WA, 06.2010, 1500. Dimensions and illustrations without obligation. Subject to modifications.