Analysis and modelling of the seismic behaviour of high ... - Ingegneria

6. SUMMARY, CONCLUSIONS AND FUTURE PERSPECTIVES
or the presence of not envisaged extra forces in the column may lead to an
anticipated rupture in the absence of a full-length steel profile.
Having had the chance to go further into detail, also looking at the inside behaviour
of the beam-to-column joints, the mechanisms activated in the shear load transfer
were determined. The evidence is that the investigated solution with the continuity
plates (stiffeners) welded to the steel column at the joint region seems not to give a
substantial contribution in helping the load transfer at the beam-to-column joint.
Thus, as not influencing significantly the global response of the joint under study,
their usage in practice could be neglected also because of their remarkable effect
on the overall cost of the assemblage.
Wishing to point out a commentary about the weak axis bending behaviour of the
concrete frame structure, we underline the risk the building might run if the seismic
wave comes along the minor axis bending and the columns were not specifically
designed to withstand cyclic loads regardless the presence of the steel profile
encased in the column.
Finally, we can say that, at the moment, the new applications are concentrated on
the improvement of the analytical models to evaluate the shear resistance at the
connection by means of further numerical simulations by means of a FE program.
It may be also interesting to produce a procedure in order to evaluate the
behaviour of the one-sided type of joints starting from the conclusions drawn out
for the two-sided type of joints considered in this research thesis.
249