Analysis and modelling of the seismic behaviour of high ... - Ingegneria

3. SEISMIC BEHAVIOUR OF BOLTED END PLATE BEAM-TO-COLUMN STEEL JOINTS
Bjorhovde R., Colson A. and Zandonini R. (1996): Connections in Steel
Structures III: Behaviour, Strength & Design. Pergamon Press, London,
UK, 594.
Bose B., Sarkar S., and Bahrami M. (1996): Extended end plate
connections: comparison between three-dimensional non-linear finite
element analysis and full scale tests. Structural Engineering Review,
Pergamon Press, UK, 8:4, 315-328.
Bursi O.S. and Jaspart J.P. (1997): Calibration of a finite element model for
isolated bolted end plate steel connections. J. of Construct. Steel Res.,
Elsevier Applied Science, UK, 44:3, 225-262.
Bursi O.S. and Jaspart J.P. (1998): Basic issues in the finite element
simulation of extended end plate connections. Computers & Structures,
Pergamon Press, UK, 69, 361-382.
Bursi O.S., Ferrario F. and Fontanari V. (2002): Non-linear Analysis of the
Low-cycle Fracture Behaviour of Isolated Tee Stub Connections.
Computers and Structures, 80, 2333-2360.
Colson A. (1992): First State of the Art Workshop, EU Project COST C1:
Semi-rigid Behaviour of Civil Engineering Structural Connections.
European Commission, Belgium, 582.
Deng C.G., Bursi O.S. and Zandonini R. (1998): Analysis of Moment
Resisting Steel Connections under Reversed Cyclic Loading. Proc. of the
Fourth Int. Conf. on Computational Structures Technology, Edinburgh, UK.
ECCS (1986): Recommended Testing Procedure for Assessing the
Behaviour of Structural Steel Elements under Cyclic Loads. ECCS
Publication n° 45.
El-Tawil S., Mikesell T., Vidarsson E. and Kunnath, S.K. (1998): Strength
and ductility of FR welded-bolted connections. Report No. SAC/BD-98/01,
SAC Joint Venture, Sacramento, CA.
Easterling, S.W. and Leon R.T. (2002): Connections in Steel Structures IV:
Behaviour, Strength & Design. AISC, Chicago, USA, 473.
European Committee for Standardization (2001): Eurocode 3: Design of
Steel Structures. Part 1.1: General Rules and Rules for Buildings.
European Prestandard – ENV 1993-1-1, Belgium.
European Committee for Standardization (2002): Eurocode 4: Design of
composite steel and concrete structures, Part 1.1 General rules and rules
for buildings. European Prestandard – prEN 1994-1-1, CEN/TC250/SC4
N259, Belgium.
97