Stimulators, Isolators
Stimulators, Isolators
Stimulators, Isolators
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
STIMULATORS, ISOLATORS<br />
A310<br />
Accupulser <br />
Combining the accuracy of digital<br />
electronics with the convenience of<br />
analog controls<br />
A pulse generator/stimulator combining the reproducibility and accuracy<br />
of digital electronics with the fine resolution and continuous adjustment<br />
possible with analog circuitry. All timing parameters are entered with tenturn<br />
readable potentiometers and six-position range switches. Outputs are<br />
accurate to within 1% of the set value.<br />
Pulses can be created in continuous run, single-shot, or train/burst<br />
modes. Duration of the train/burst is easily controlled using the onboard<br />
envelope generator or by using either of two external gating inputs. Used<br />
in conjunction with the A360, A365, A385, or A395, bipolar pulses or<br />
trains may be easily produced. Output stimulus can be fed through the<br />
Duo 773 for iontophoresis. Footswitch allows hands-free operation.<br />
Three separate outputs are available on the front panel. A Monitor<br />
output provides 10-15 V signals (up to 50 mA) for viewing the output on<br />
an oscilloscope or for controlling other devices. The stimulator’s signal,<br />
simultaneously available at the Isolator output, is sufficient to drive any<br />
WPI A300 Series stimulus isolator (A360, A365, or A385) and is also TTL<br />
and CMOS compatible. The Variable output can provide signals varying<br />
between ±10 V with a resolution of 1 mV. Separate variable outputs are<br />
provided for positive and negative signals.<br />
SYS-A310 Accupulser Signal Generator<br />
Specify line voltage<br />
OPTIONAL ACCESSORIES<br />
3259 Footswitch for A310<br />
2933 Rack Mount Kit, 51 ⁄4 in. high<br />
Optional footswitch #3259<br />
Stimulus Isolator<br />
(A360)<br />
A310 ACCUPULSER SPECIFICATIONS<br />
TIMING PARAMETERS<br />
EVENT INTERVAL 100 μs to1000 s*<br />
EVENT DELAY 10 μs to 100 s *<br />
PULSE WIDTH 10 μs to 100 s *<br />
TRAIN DURATION (ENVELOPE) 100 μs to 1000 s*<br />
PULSE INTERVAL<br />
OUTPUTS<br />
20 μs to 100 s*<br />
SYNC 5 μs, TTL, and 5 V CMOS compatible,<br />
20 mA max.<br />
MONITOR 10-15 V, 50 mA max.<br />
ISOLATOR<br />
VARIABLE (Pos or Neg)<br />
TTL & 5 V CMOS compatible, 20mA max.<br />
PULSED/DC LOW RANGE HIGH RANGE<br />
Range 0 to ±1 V 0 to ±10 V<br />
Resolution<br />
NOISE<br />
1 mV 10 mV<br />
Pulsed at 100 kHz bandwidth