Scsi - Index of

112 case GPCMD_READ_HEADER: what = "READ HEADER"; break;
113 case GPCMD_PLAY_AUDIO_10: what = "PLAY AUDIO (10)"; break;
114 case GPCMD_PLAY_AUDIO_MSF: what = "PLAY AUDIO MSF"; break;
115 case GPCMD_GET_EVENT_STATUS_NOTIFICATION:
116 what = "GET EVENT/STATUS NOTIFICATION"; break;
117 case GPCMD_PAUSE_RESUME: what = "PAUSE/RESUME"; break;
118 case LOG_SELECT: what = "LOG_SELECT"; break;
119 case LOG_SENSE: what = "LOG_SENSE"; break;
120 case GPCMD_STOP_PLAY_SCAN: what = "STOP PLAY/SCAN"; break;
121 case GPCMD_READ_DISC_INFO: what = "READ DISC INFORMATION";
break;
122 case GPCMD_READ_TRACK_RZONE_INFO:
123 what = "READ TRACK INFORMATION"; break;
124 case GPCMD_RESERVE_RZONE_TRACK: what = "RESERVE TRACK"; break;
125 case GPCMD_SEND_OPC: what = "SEND OPC"; break;
126 case MODE_SELECT_10: what = "MODE_SELECT_10"; break;
127 case GPCMD_REPAIR_RZONE_TRACK: what = "REPAIR TRACK"; break;
128 case 0x59: what = "READ MASTER CUE"; break;
129 case MODE_SENSE_10: what = "MODE_SENSE_10"; break;
130 case GPCMD_CLOSE_TRACK: what = "CLOSE TRACK/SESSION"; break;
131 case 0x5C: what = "READ BUFFER CAPACITY"; break;
132 case 0x5D: what = "SEND CUE SHEET"; break;
133 case GPCMD_BLANK: what = "BLANK"; break;
134 case MOVE_MEDIUM: what = "MOVE_MEDIUM or PLAY AUDIO (12)"; break;
135 case READ_12: what = "READ_12"; break;
142
136 case WRITE_12: what = "WRITE_12"; break;
137 case WRITE_VERIFY_12: what = "WRITE_VERIFY_12"; break;
138 case SEARCH_HIGH_12: what = "SEARCH_HIGH_12"; break;
139 case SEARCH_EQUAL_12: what = "SEARCH_EQUAL_12"; break;
140 case SEARCH_LOW_12: what = "SEARCH_LOW_12"; break;
141 case SEND_VOLUME_TAG: what = "SEND_VOLUME_TAG"; break;
142 case READ_ELEMENT_STATUS: what = "READ_ELEMENT_STATUS"; break;
143 case GPCMD_READ_CD_MSF: what = "READ CD MSF"; break;
144 case GPCMD_SCAN: what = "SCAN"; break;
145 case GPCMD_SET_SPEED: what = "SET CD SPEED"; break;
146 case GPCMD_MECHANISM_STATUS: what = "MECHANISM STATUS"; break;
147 case GPCMD_READ_CD: what = "READ CD"; break;
148 case 0xE1: what = "WRITE CONTINUE"; break;
149 case WRITE_LONG_2: what = "WRITE_LONG_2"; break;
150 default: what = "(unknown command)"; break;
151 }
152 US_DEBUGP("Command %s (%d bytes)\n", what, srb->cmd_len);
153 US_DEBUGP("");