Click Here - Gujarat Pollution Control Board

gas emission rate emission ffom the each utility including Reheating Fumaces, Boilers
etc. (vii) Air Pollution Control Measures proposed to each of the utility along with its
adequacy (viii) List the sources of fugitive emission from the unit along with its
quantification and proposed measures to control it.
',|3. Technical details of ESP to be installed as air pollution control system along with its
adequacy. Details of provisions to be kept in ESP to ensure that in any case the air
emission does not cross the GPCB norms including provision of standby field in the
ESP, preventive maintenance, failure / tripping conhol system, guarantee from the ESP
supplier, altemative anangements in case of the failure 1 tripping of lhe ESP etc.
14. Technical details of Induction Furnace including its cooliog and interlocking systems
alongwith drawing of the induction furnace along with its adequacy. Details of Air
Pollulion Control Measures proposad for tnduction Furnace. Details of specific
measures to ensure that emission from the lnduction Furnace will not escape from the
furnace in form of fugitive emission bypassing the air pollution control system.
15. Generation of waste gases and their utilization have to be set out.
16. Detailed plen for prevention and control of fugitive emission I dusting at each and every
stage of coal handling including unloading / loading at Kandala port, transPortation from
poil to plant, unloading / loading / stacking / conveyance / iransfer at plant alongwith
detailed specifications & schematic diagram of water sprinkler system arrangement.
17. lmpact of the transport of raw material and finished product on the transporl system
should be assessed and provided.
18. Existing status of water quality, soit quality, noise level, flora, fauna etc. in the study
area and impacts of the project expansion on ihe same along with mitigation measures.
19. Details on hazardous / solid waste generation, handing, storage, utilization and
disposal, for each type of waste. Copies of MOU / agreements done with actual
consumers regarding utilization of fly ash, bottom ash and slag etc. should be included.
20. Data on air emissions, wastewater generation and solid / hazardous waste generation
and management for the existing plant should also be incorporated.
21. Copies of membership certificate of Common Environmental lnfrastructure like TSDF, if
any taken, should be incorporated.
22. A detailed EMP including the protection and mitigation measures for impact on human
health and environment as wetl as detailed monitoring plan and environmental
management cell proposed for implementation and monitoring of EMP. The EMP should
also include the concept of waste-minimisation, recycle/reuse/recover techniques,
energy conservation, and natural resource conservation. Total capital cost and recurring
cosuannum earmarked for environment pollution oontrol measures.
23. Occupational health impacts on the workers and mitigation m€asures proposed to avoid
the human health hazards along with the personal protective equipment to be provided
3J