2 - ALU-WEB.DE
2 - ALU-WEB.DE 2 - ALU-WEB.DE
16 NEWS Mustertext 2 4 | 06-2008 12-2009 APT ALUMINIUM NEWS Alcoa and COMAC Explore Leading Technology Solutions for C919, China’s Largest Passenger Aircraft A prototype of COMAC's C919 passenger jet was on display at the Asian Aerospace '09 in Hong Kong last month. Alcoa and COMAC are jointly exploring technology solutions for the design and development of the new 190-seat aircraft Alcoa and Commercial Aircraft Corporation of China Ltd. (COMAC) are jointly exploring leading technology solutions for the design and development of China’s new, large passenger jet, the C919. Through a technology cooperation agreement, the two companies are examining advanced aluminium structural concepts, designs and alloys to create the 190seat aircraft. “We are working closely with COMAC to develop a tailored solution that will meet COMAC’s goal of creating a globally competitive, high-performance, economical commercial airliner,” said Helmut Wieser, Alcoa executive vice-president and group president Global Rolled Products and Asia. The aircraft will be assembled in Shanghai, but will source parts and components globally. “The C919 will be the largest passenger jet to be produced in China. Our goal is to design an efficient, highperformance structure that will compete in the global aerospace market. Therefore, it is imperative that we look at design alternatives and collaborate with innovative materials technology leaders like Alcoa,” said Wu Guanghui, chief designer of the C919 program and vice president of COMAC. A prototype of the C919 was displayed at the Asian Aerospace International Expo and Congress in Hong Kong in September 2009. There is strong market interest for this aircraft based on China’s expected long-term growth in global passenger traffic demand. The C919 is expected to take its first flight in 2014 and enter service in 2016. Alcoa has 15 locations throughout China. Offices and plants are located in Beijing, Shanghai, Qinhuangdao, Kunshan, Suzhou, Guangzhou and Hong Kong. Alcoa’s advanced alloys and materials are used on China’s first home-produced regional jet, the ARJ21-700. www.alcoa.com/aerospace www.alcoa.com Ebner receives order for pusher furnaces from Shandong Nanshan Shandong Nanshan Aluminium Co. Ltd recently signed another contract with Ebner, a leading producer of heat treatment facilities, for two ‘Hicon’ pusher furnace facilities to homogenise and reheat aluminium ingots. The entire facility will then consist of four Hicon pushertype furnaces. Each furnace can heat-treat 25 ingots with a maximum combined net weight of 750 tonnes. The ingot handling system, already commissioned for the first two furnaces in 2006, will be expanded to serve the two new furnaces as well. As with the existing facilities, the new one will be equipped with a state-of-the-art automation system with integrated ingot tracking and ingot temperature measuring to enable fully automatic operation. The facility will be turnkey installed by Ebner. Commissioning of the facility is scheduled for the end of 2010. www.ebnerfurnaces.com Photo: Business Wire Rusnano and Alcoa Sign a Memorandum of Understanding Alcoa president and CEO Klaus Kleinfeld and Rusnano CEO Anatoly Chubais have signed a memorandum of understanding to explore opportunities for applying nanotechnology in the aluminium industry. The two companies have identified several promising technical and commercial fields to begin pursuing together. These include off-shore oil and gas dril- ling systems, high-efficiency power transmission, nextgeneration lighting, energyefficient buildings and transportation systems and green packaging. The signing took place during a visit by a Rusnano delegation to Alcoa’s New York headquarters and the Alcoa Technical Center in Pittsburgh, Pennsylvania. Commenting on the results of the visit, Klaus Kleinfeld said: “This partnership with Rusnano offers great promise for Alcoa and the entire aluminium industry. Building on our existing investment and presence in Russia, we are proud to be a partner of the leading Russian nanotechnology institution.” Alcoa has been present in Russia since 1993. In 2005, the company purchased two leading aluminium fabricating facilities Alcoa SMZ (formerly the Samara metallurgical plant) and Alcoa Metallurg Rus (formerly Belaya Kalitva metallurgical production plant.). Alcoa has modernized the facilities, investing more than USD750 million in upgrades. Together with Rusnano, Alcoa continues that modernization with the new development of cuttingedge, advanced technologies for aluminium production in Russia. The Company anticipates the partnership will not only contribute to the increase in the aluminium products consumption in the country, but will also assist in diversifying and innovating the Russian economy. Rusnano CEO Anatoly Chubais stated: “Having been established in 2007, our cor- poration has occupied a very active position in working with the world’s leading companies and scientific institutions on developing and localizing the nanotechnologies in Russia. We work in cooperation with the most renowned Russian scientists and experts to identify and commercialize the innovative technologies that will take the Russian economy to the next level of development. I am confident that the memorandum of understanding that we signed with Alcoa, one of the global leaders in the production of aluminium and aluminium products, is a first step on the road to a very beneficial joint cooperation that will heavily rely on both parties’ expansive knowledge and expertise. With Alcoa, we are looking forward to the implementation of the concrete projects of bringing nanotechnologies’ advantage for the creation of the new generation aluminium products for the Russian and export markets.” The Russian Corporation of Nanotechnologies (Rusna- Opening of the most modern plant for the production of aluminum profiles by Montana Tech Components AG Montana Tech Components AG, Menziken (Switzerland), opened the most modern production plant for aluminium profiles in Baia Mare in Romania. The plant was built to fulfil a long-term contract with EADS/Airbus Industries. Montana Tech Components AG (MTC) inaugurated on November 11, 2009 together with its Romanian daughter company UAC Europe S.R.L a new production plant for aluminium profiles for the aerospace industry in Baia Mare/Dumbravita in the province Maramures in Romania. A 5-year long-term contract with Airbus Industries built the basis for the construction of the plant by the MTC division Aerospace & Industrial Components. The contract is supposed to gene-rate a yearly turnover of about EUR25 million and secures the base load from 2010 on. The certification process by Airbus Industries is already partly finished. Also with Boeing the production of aluminium components may be set up. The production with the 1 st press started in May 2009. Currently already three presses are running and the 4 th press will start in the beginning of 2010. The plant will have a yearly capacity of 2.000 tonnes at full use of capacity and holds a yearly turnover potential of about EUR30 million. The reason for the location was the wage costs which are 15% less than in Switzerland. Klaus Sernetz, CEO the Montana Tech Components AG: „To be able to compete with international market prices we had to transfer the production to a low cost country.“ The volume of the project amounts to EUR30 million in total. In 2010 a cast house will be built on the factory premise Alcan Automotive creates joint venture in China Alcan Engineered and Automotive Solutions (EAS), part of Alcan Engineered Products, signed a joint venture (JV) agreement with Changchun Engley Automobile Parts Co. Ltd (Engley). The JV company will be based in the northeastern Chinese city of Changchun with a second manufacturing plant located in Kunshan, close to Shanghai, to serve several car manufacturers in both the northern and southern regions of China. Alcan Automotive will be the majority shareholder and expects to start supplying products in late 2009. Alcan Engley Automotive Structures Co. Ltd will develop and produce crash management systems, instrument panel beams and other structural modules made of aluminium. The company sees a strong demand for its products, which help to develop the next generation of greener, more fuel-efficient cars in China and Asia. “China is posting double digit growth in car sales and will continue to offer exceptional growth opportunities for our engineered products in the coming years”, says Wolfgang Schmitz, president EAS. Through several project acquisitions in recent years, Alcan EAS has become a strong supplier of advanced lightweight solutions in Europe and North America. Incorporating the partnership with Engley is the next logical step to tackle the Chinese and Asian markets. no) was established in 2007 to effect government policy in the field of nanotechnology. Rusnano co-invests in nanotechnology industry projects that have high commercial potential or considerable social benefit. Earlystage investment by Rusnano lowers the risks to partners in investment from the private sector. Rusnano participates in building nanotechnology infrastructure, provides educational programs, and supports the popularization of nanoscience and nanotechnology. To enable the Russian nanotechnology industry to strengthen its international links and to advance to the global market, Rusnano develops partnerships with the world’s leading nano-technology centers and organizes the annual Nanotechnology International Forum in Russia. www.rusnano.com www.alcoa.com and including this expansion the turnover shall be tripled over the next 3-4 years. Montana Tech Components AG (MTC) focuses on selected key technologies in global markets which show a particularly rapid growth and a strong growth potential in the medium term. Montana Tech Components AG wants to consistently further develop its three divisions Aerospace & Industrial Components, Metal Tech and Varta Micro Power. www.montanatechcomponents.com Engley, a Taiwan-owned enterprise, is headquartered in Changchun City, Jilin Province of China. In both Suzhou and Changchun, Engley has a strong production base for automotive parts and mould manufacturing. Engley is not only a supplier of steel and aluminium crash management and body-in-white modules, but is also the largest Chinese supplier of long glass fibre thermoplastic parts. www.alcan.com
APT ALUMINIUM NEWS 4 | 12-2009 1 Smelting technology 1.1 Primary metal products 1.2 Storage facilities for smelting 1.3 Anode production 1.4 Anode rodding 1.5 Casthouse (foundry) 1.6 Casting machines 1.7 Current supply 1.8 Electrolysis cell (pot) 1.9 Potroom 1.10 Laboratory 1.11 Emptying the cathode shell 1.12 Cathode repair shop 1.13 Second-hand plant 1.14 Aluminium alloys 1.1 Primary metal products TRIMET ALUMINIUM AG Niederlassung Düsseldorf Heinrichstr. 155 D-40239 Düsseldorf Tel.: +49 (0) 211 / 96180-0 Fax: +49 (0) 211 / 96180-60 Internet: www.trimet.de Rolling ingots Alcan Aluminium Valais SA CH-3960 Sierre Telefon: 0041 27 / 4575111 Telefax: 0041 27 / 4576425 1.2 Storage facilities for smelting FLSmidth MöLLER GmbH Haderslebener Straße 7 D-25421 Pinneberg Telefon: 04101 788-0 Telefax: 04101 788-115 E-Mail: moeller@flsmidth.com Internet: www.flsmidthmoeller.com Kontakt: Herr Dipl.-Ing. Timo Letz Outotec GmbH Albin-Köbis-Str. 8, D-51147 Köln Phone: +49 (0) 2203 / 9921-0 E-mail: aluminium@outotec.com www.outotec.com 1.3 Anode production Anode mix production (kneading) Buss AG CH-4133 Pratteln E-Mail: info@busscorp.com Internet: www.busscorp.com Hydraulic presses for prebaked anodes LAEIS GmbH Am Scheerleck 7, L-6868 Wecker, Luxembourg Phone:+352 27612 0 Fax: +352 27612 109 E-Mail: info@laeis-gmbh.com Internet: www.laeis-gmbh.com Contact: Dr. Alfred Kaiser 1.4 Anode rodding Removal of bath residues from the surface of spent anodes GLAMA Maschinenbau GmbH Hornstraße 19 D-45964 Gladbeck Telefon 02043 / 9738-0 Telefax 02043 / 9738-50 Transport of finished anode elements to the pot room 1.5 Casthouse HERTWICH ENGINEERING GmbH Maschinen und Industrieanlagen Weinbergerstraße 6, A-5280 Braunau am Inn Phone +437722/806-0 Fax +437722/806-122 E-Mail: info@hertwich.com Internet: www.hertwich.com INOTHERM INDUSTRIEOFEN- UND WÄRMETECHNIK GMBH Konstantinstraße 1a D 41238 Mönchengladbach Phone: +49 (02166) 987990 Fax: +49 (02166) 987996 Mail: info@inotherm-gmbh.de Web: www.inotherm-gmbh.de Stopinc AG Bösch 83 a CH-6331 Hünenberg Tel. +41/41-785 75 00 Fax +41/41-785 75 01 E-Mail: interstop@stopinc.ch Internet: www.stopinc.ch Sawing Hovestr. 10 . D-48431 Rheine Telefon + 49 (0) 59 7158-0 Fax + 49 (0) 59 7158-209 E-Mail info@windhoff.de Internetwww.windhoff.de 1.6 Casting machines Holding / melting furnaces LOI Thermprocess GmbH Am Lichtbogen 29, D-45141 Essen Tel. +49 (0) 201-1891-1, Fax -1891-321 E-Mail: info@loi-italimpianti.de Internet: www.loi-italimpianti.com 343 Chemin du Stade 38210 Saint Quentin sur Isère Tel. +33 (0) 476 074 242 Fax +33 (0) 476 936 776 E-Mail: sermas@sermas.com Internet: www.sermas.com Vertical continuous casting LOI Thermprocess GmbH Am Lichtbogen 29, D-45141 Essen Tel. +49 (0) 201-1891-1, Fax -1891-321 E-Mail: info@loi-italimpianti.de Internet: www.loi-italimpianti.com Vertical semi-continuous DC casting Wagstaff, Inc. 3910 N. Flora Rd. Spokane, WA 99216 USA +1 509 922 1404 phone +1 509 924 0241 fax E-Mail: info@wagstaff.com Internet: www.wagstaff.com 2 Extrusion 2.1 Extrusion billet preparation 2.2 Extrusion equipment 2.3 Section handling 2.4 Heat treatment 2.5 Measurement and control equipment 2.6 Die preparation and care 2.7 Second-hand extrusion plant 2.8 Consultancy, expert opinion 2.9 Surface finishing of sections 2.10 Machining of sections 2.11 Equipment and accessories 2.12 Services www.otto-junker-group.com OTTO JUNKER GmbH Jägerhausstr. 22 D – 52152 Simmerath Phone +49 2473 601 0 Fax +49 2473 601 600 E-Mail info@otto-junker.de Contact Mr. Teichert / Heat Treatmant Plants Dr. Menzler / Extrusion Plants Mr. Donsbach / Foundry Plants OTTO JUNKER (UK) LTD. Kingsbury Road, Curdworth UK - SUTTON COLDFIELD B76 9EE Phone +44 1675 470551 Fax +44 1675 470645 E-Mail info@otto-junker.co.uk Contact Mr. Hall IUT INDUSTRIELL UGNSTEKNIK AB Industrivägen 2 SE - 438 92 Härryda Phone +46 301 508000 Fax +46 301 30479 E-Mail office@iut.se Contact Mr. Berge 2.1 Extrusion billet preparation SIGNODE® SySTEM GMBH Packaging Equipment Non-Ferrous Specialist Team DSWE Magnusstr. 18, 46535 Dinslaken/Germany Telefon: +49 (0) 2064 / 69-210 Telefax: +49 (0) 2064 / 69-489 E-Mail: g.laks@signode-europe.com Internet: www.signode.com Contact: Mr. Gerard Laks Billet heating furnaces Sistem Teknik Ltd. Sti. DES San. Sit. 102 SOK No: 6/8 Y.Dudullu, TR-34775 Istanbul/Turkey Tel.: +90 216 420 86 24 Fax: +90 216 420 23 22 E-Mail: info@sistemteknik.com Internet: www.sistemteknik.com 2.2 Extrusion equipment SMS Meer GmbH Schloemann Extrusion Ohlerkirchweg 66 41069 Mönchengladbach, Germany Phone: +49 (0) 2161 350-0 Fax: +49 (0) 2161 350-1667 Mail: info@sms-meer.com Web: www.sms-meer.com Containers SMS Meer GmbH see Extrusion equipment 2.2 Press control systems SMS Meer GmbH see Extrusion equipment 2.2 Temperature measurement SMS Meer GmbH see Extrusion equipment 2.2 2.3 Section handling Packaging equipment Vollert Anlagenbau GmbH + Co. KG Stadtseestraße 12 D-74189 Weinsberg Tel. +49 (0) 7134 / 52-220 Fax +49 (0) 7134 / 52-222 E-Mail intralogistik@vollert.de Internet www.vollert.de Puller equipment SMS Meer GmbH see Extrusion equipment 2.2 Section cooling SMS Meer GmbH see Extrusion equipment 2.2 Section saws SMS Meer GmbH see Extrusion equipment 2.2 Section store equipment Vollert Anlagenbau GmbH + Co. KG see Packaging equipment 2.3 Section transport equipment SMS Meer GmbH see Extrusion equipment 2.2 Stackers / Destackers SMS Meer GmbH see Extrusion equipment 2.2 Stretching equipment SMS Meer GmbH see Extrusion equipment 2.2 Transport equipment for extruded sections Vollert Anlagenbau GmbH + Co. KG see Packaging equipment 2.3 2.4 Heat treatment Heat treatment furnaces INOTHERM INDUSTRIEOFEN- UND WÄRMETECHNIK GMBH see Casthouse (foundry) 1.5 2.5 Measurement and control equipment Extrusion plant control systems SMS Meer GmbH see Extrusion equipment 2.2 2.7 Second hand extrusion plant 17 BSN Thermprozesstechnik GmbH Kammerbruchstraße 64 D-52152 Simmerath Tel. 02473-9277-0 · Fax: 02473-9277-111 info@bsn-therm.de · www.bsn-therm.de Ofenanlagen zum Wärmebehandeln von Aluminiumlegierungen, Buntmetallen und Stählen 2.6 Die preparation and care Die heating furnaces Nijverheidsweg 3 NL-7071 CH Ulft Netherlands Tel.: +31 315 641352 Fax: +31 315 641852 E-Mail: info@unifour.nl Internet: www.unifour.nl Sales Contact: Paul Overmans Qualiteam International/ExtruPreX Champs Elyséesweg 17, NL-6213 AA Maastricht Tel. +31-43-3 25 67 77 Internet: www.extruprex.com
- Page 1 and 2: APT ALUMINIUM NEWS 2 | 06-2008 Volu
- Page 3 and 4: APT ALUMINIUM NEWS 4 | 12-2009 Hydr
- Page 5 and 6: APT ALUMINIUM NEWS 4 | 12-2009 Redu
- Page 7 and 8: APT ALUMINIUM NEWS 4 | 12-2009 EXTR
- Page 9 and 10: APT ALUMINIUM NEWS 4 2 | 06-2008 12
- Page 11 and 12: APT ALUMINIUM NEWS 4 | 12-2009 EQUI
- Page 13 and 14: APT ALUMINIUM NEWS 4 | 12-2009 AUTO
- Page 15: APT ALUMINIUM NEWS 4 | 12-2009 The
- Page 19 and 20: APT ALUMINIUM NEWS 4 | 12-2009 4 Fo
APT <strong>ALU</strong>MINIUM NEWS 4 | 12-2009<br />
1 Smelting<br />
technology<br />
1.1 Primary metal products<br />
1.2 Storage facilities<br />
for smelting<br />
1.3 Anode production<br />
1.4 Anode rodding<br />
1.5 Casthouse (foundry)<br />
1.6 Casting machines<br />
1.7 Current supply<br />
1.8 Electrolysis cell (pot)<br />
1.9 Potroom<br />
1.10 Laboratory<br />
1.11 Emptying the cathode shell<br />
1.12 Cathode repair shop<br />
1.13 Second-hand plant<br />
1.14 Aluminium alloys<br />
1.1 Primary metal products<br />
TRIMET <strong>ALU</strong>MINIUM AG<br />
Niederlassung Düsseldorf<br />
Heinrichstr. 155<br />
D-40239 Düsseldorf<br />
Tel.: +49 (0) 211 / 96180-0<br />
Fax: +49 (0) 211 / 96180-60<br />
Internet: www.trimet.de<br />
Rolling ingots<br />
Alcan Aluminium Valais SA<br />
CH-3960 Sierre<br />
Telefon: 0041 27 / 4575111<br />
Telefax: 0041 27 / 4576425<br />
1.2 Storage facilities<br />
for smelting<br />
FLSmidth MöLLER GmbH<br />
Haderslebener Straße 7<br />
D-25421 Pinneberg<br />
Telefon: 04101 788-0<br />
Telefax: 04101 788-115<br />
E-Mail: moeller@flsmidth.com<br />
Internet: www.flsmidthmoeller.com<br />
Kontakt: Herr Dipl.-Ing. Timo Letz<br />
Outotec GmbH<br />
Albin-Köbis-Str. 8, D-51147 Köln<br />
Phone: +49 (0) 2203 / 9921-0<br />
E-mail: aluminium@outotec.com<br />
www.outotec.com<br />
1.3 Anode production<br />
Anode mix production<br />
(kneading)<br />
Buss AG<br />
CH-4133 Pratteln<br />
E-Mail: info@busscorp.com<br />
Internet: www.busscorp.com<br />
Hydraulic presses for<br />
prebaked anodes<br />
LAEIS GmbH<br />
Am Scheerleck 7, L-6868 Wecker, Luxembourg<br />
Phone:+352 27612 0<br />
Fax: +352 27612 109<br />
E-Mail: info@laeis-gmbh.com<br />
Internet: www.laeis-gmbh.com<br />
Contact: Dr. Alfred Kaiser<br />
1.4 Anode rodding<br />
Removal of bath residues from<br />
the surface of spent anodes<br />
GLAMA Maschinenbau GmbH<br />
Hornstraße 19<br />
D-45964 Gladbeck<br />
Telefon 02043 / 9738-0<br />
Telefax 02043 / 9738-50<br />
Transport of finished anode<br />
elements to the pot room<br />
1.5 Casthouse<br />
HERTWICH ENGINEERING GmbH<br />
Maschinen und Industrieanlagen<br />
Weinbergerstraße 6, A-5280 Braunau am Inn<br />
Phone +437722/806-0<br />
Fax +437722/806-122<br />
E-Mail: info@hertwich.com<br />
Internet: www.hertwich.com<br />
INOTHERM INDUSTRIEOFEN-<br />
UND WÄRMETECHNIK GMBH<br />
Konstantinstraße 1a<br />
D 41238 Mönchengladbach<br />
Phone: +49 (02166) 987990<br />
Fax: +49 (02166) 987996<br />
Mail: info@inotherm-gmbh.de<br />
Web: www.inotherm-gmbh.de<br />
Stopinc AG<br />
Bösch 83 a<br />
CH-6331 Hünenberg<br />
Tel. +41/41-785 75 00<br />
Fax +41/41-785 75 01<br />
E-Mail: interstop@stopinc.ch<br />
Internet: www.stopinc.ch<br />
Sawing<br />
Hovestr. 10 . D-48431 Rheine<br />
Telefon + 49 (0) 59 7158-0<br />
Fax + 49 (0) 59 7158-209<br />
E-Mail info@windhoff.de<br />
Internetwww.windhoff.de<br />
1.6 Casting machines<br />
Holding / melting furnaces<br />
LOI Thermprocess GmbH<br />
Am Lichtbogen 29, D-45141 Essen<br />
Tel. +49 (0) 201-1891-1, Fax -1891-321<br />
E-Mail: info@loi-italimpianti.de<br />
Internet: www.loi-italimpianti.com<br />
343 Chemin du Stade<br />
38210 Saint Quentin sur Isère<br />
Tel. +33 (0) 476 074 242<br />
Fax +33 (0) 476 936 776<br />
E-Mail: sermas@sermas.com<br />
Internet: www.sermas.com<br />
Vertical continuous casting<br />
LOI Thermprocess GmbH<br />
Am Lichtbogen 29, D-45141 Essen<br />
Tel. +49 (0) 201-1891-1, Fax -1891-321<br />
E-Mail: info@loi-italimpianti.de<br />
Internet: www.loi-italimpianti.com<br />
Vertical semi-continuous DC<br />
casting<br />
Wagstaff, Inc.<br />
3910 N. Flora Rd.<br />
Spokane, WA 99216 USA<br />
+1 509 922 1404 phone<br />
+1 509 924 0241 fax<br />
E-Mail: info@wagstaff.com<br />
Internet: www.wagstaff.com<br />
2 Extrusion<br />
2.1 Extrusion billet preparation<br />
2.2 Extrusion equipment<br />
2.3 Section handling<br />
2.4 Heat treatment<br />
2.5 Measurement and<br />
control equipment<br />
2.6 Die preparation and care<br />
2.7 Second-hand extrusion<br />
plant<br />
2.8 Consultancy, expert opinion<br />
2.9 Surface finishing of sections<br />
2.10 Machining of sections<br />
2.11 Equipment and accessories<br />
2.12 Services<br />
www.otto-junker-group.com<br />
OTTO JUNKER GmbH<br />
Jägerhausstr. 22<br />
D – 52152 Simmerath<br />
Phone +49 2473 601 0<br />
Fax +49 2473 601 600<br />
E-Mail info@otto-junker.de<br />
Contact Mr. Teichert / Heat Treatmant Plants<br />
Dr. Menzler / Extrusion Plants<br />
Mr. Donsbach / Foundry Plants<br />
OTTO JUNKER (UK) LTD.<br />
Kingsbury Road, Curdworth<br />
UK - SUTTON COLDFIELD B76 9EE<br />
Phone +44 1675 470551<br />
Fax +44 1675 470645<br />
E-Mail info@otto-junker.co.uk<br />
Contact Mr. Hall<br />
IUT INDUSTRIELL UGNSTEKNIK AB<br />
Industrivägen 2<br />
SE - 438 92 Härryda<br />
Phone +46 301 508000<br />
Fax +46 301 30479<br />
E-Mail office@iut.se<br />
Contact Mr. Berge<br />
2.1 Extrusion billet<br />
preparation<br />
SIGNO<strong>DE</strong>® SySTEM GMBH<br />
Packaging Equipment<br />
Non-Ferrous Specialist Team DSWE<br />
Magnusstr. 18, 46535 Dinslaken/Germany<br />
Telefon: +49 (0) 2064 / 69-210<br />
Telefax: +49 (0) 2064 / 69-489<br />
E-Mail: g.laks@signode-europe.com<br />
Internet: www.signode.com<br />
Contact: Mr. Gerard Laks<br />
Billet heating furnaces<br />
Sistem Teknik Ltd. Sti.<br />
<strong>DE</strong>S San. Sit. 102 SOK No: 6/8<br />
Y.Dudullu, TR-34775 Istanbul/Turkey<br />
Tel.: +90 216 420 86 24<br />
Fax: +90 216 420 23 22<br />
E-Mail: info@sistemteknik.com<br />
Internet: www.sistemteknik.com<br />
2.2 Extrusion equipment<br />
SMS Meer GmbH<br />
Schloemann Extrusion<br />
Ohlerkirchweg 66<br />
41069 Mönchengladbach, Germany<br />
Phone: +49 (0) 2161 350-0<br />
Fax: +49 (0) 2161 350-1667<br />
Mail: info@sms-meer.com<br />
Web: www.sms-meer.com<br />
Containers<br />
SMS Meer GmbH<br />
see Extrusion equipment 2.2<br />
Press control systems<br />
SMS Meer GmbH<br />
see Extrusion equipment 2.2<br />
Temperature measurement<br />
SMS Meer GmbH<br />
see Extrusion equipment 2.2<br />
2.3 Section handling<br />
Packaging equipment<br />
Vollert Anlagenbau<br />
GmbH + Co. KG<br />
Stadtseestraße 12<br />
D-74189 Weinsberg<br />
Tel. +49 (0) 7134 / 52-220<br />
Fax +49 (0) 7134 / 52-222<br />
E-Mail intralogistik@vollert.de<br />
Internet www.vollert.de<br />
Puller equipment<br />
SMS Meer GmbH<br />
see Extrusion equipment 2.2<br />
Section cooling<br />
SMS Meer GmbH<br />
see Extrusion equipment 2.2<br />
Section saws<br />
SMS Meer GmbH<br />
see Extrusion equipment 2.2<br />
Section store equipment<br />
Vollert Anlagenbau<br />
GmbH + Co. KG<br />
see Packaging equipment 2.3<br />
Section transport equipment<br />
SMS Meer GmbH<br />
see Extrusion equipment 2.2<br />
Stackers / Destackers<br />
SMS Meer GmbH<br />
see Extrusion equipment 2.2<br />
Stretching equipment<br />
SMS Meer GmbH<br />
see Extrusion equipment 2.2<br />
Transport equipment for<br />
extruded sections<br />
Vollert Anlagenbau<br />
GmbH + Co. KG<br />
see Packaging equipment 2.3<br />
2.4 Heat treatment<br />
Heat treatment furnaces<br />
INOTHERM INDUSTRIEOFEN-<br />
UND WÄRMETECHNIK GMBH<br />
see Casthouse (foundry) 1.5<br />
2.5 Measurement and<br />
control equipment<br />
Extrusion plant control systems<br />
SMS Meer GmbH<br />
see Extrusion equipment 2.2<br />
2.7 Second hand<br />
extrusion plant<br />
17<br />
BSN Thermprozesstechnik GmbH<br />
Kammerbruchstraße 64<br />
D-52152 Simmerath<br />
Tel. 02473-9277-0 · Fax: 02473-9277-111<br />
info@bsn-therm.de · www.bsn-therm.de<br />
Ofenanlagen zum Wärmebehandeln von Aluminiumlegierungen,<br />
Buntmetallen und Stählen<br />
2.6 Die preparation and care<br />
Die heating furnaces<br />
Nijverheidsweg 3<br />
NL-7071 CH Ulft Netherlands<br />
Tel.: +31 315 641352<br />
Fax: +31 315 641852<br />
E-Mail: info@unifour.nl<br />
Internet: www.unifour.nl<br />
Sales Contact: Paul Overmans<br />
Qualiteam International/ExtruPreX<br />
Champs Elyséesweg 17, NL-6213 AA Maastricht<br />
Tel. +31-43-3 25 67 77<br />
Internet: www.extruprex.com
Change language