HELLA - Lighting catalogue

Signal Lights
For flusch or surface mounting
In LED-technology. With 4 LEDs.
Lens red/amber/red with spare part lens clear.
Rear light: 4.0W, stop light: 3.0W, indicator light: 2.0W.
Consumption: 0.75A at 12V, 0.38A at 24V.
Black plastic body.
Voltage range: 9V - 32V.
Light may be installed 2 x per vehicle side.
See LED instruction 1.
Part no.
Pk.
2SD 344 100-001 1
2SD 344 100-007 40
2SD 344 100-101 1
Rear-stop-indicator light
with two holes for fixing screws ST 4,8
and 500 mm lead, for flush mounting
without lead,
with two M6 x 20 fixing screws,
for surface mounting
For horizontal surface mounting
Without legal regulations for indicator failure control,
with passive electronic. The indicator failure control
in the vehicle demanded by law within the scope
of ECE has to be ensured.
The customer is responsible for this.
In LED-Technology. With 42 LEDs, grommet and 500 mm lead.
Red rear and stop light, amber indicator light.
Rear light: 0.5W, stop light: 2.0W, indicator light: 3.0W.
Black plastic body.
Two M6 fixing screws.
Consumption: 0.23A at 24V.
See LED instruction 4.
Part no.
Pk.
2SD 001 685-347 20 Rear-stop and indicator light, 24V
5DS 009 602-001 1
Accessories:
Control unit, 24V
Flasher unit, 24V,
4DM 009 492-001 1 2 + 1
4DM 009 492-011 1 3 + 1
5. 50 LHT 11