HELLA - Lighting catalogue

Work lights
for upright or pendant mounting
Ultra Beam Standard with FF® reflector
Lens pattern for wide ground illumination.
Light aperture: 83 x 83 mm.
Recommended angle of inclination: 15° - 20°.
Reflector made of diecast aluminium, glued to hardened glass lens.
Black plastic body with extending edge to protect lens.
Pivot base with M10 fixing screw.
Without vibration damping. Pivot range vertical 130°.
Part no.
1GA 007 506-081 1
1GA 007 506-001 1
1GA 007 506-007 30
1GA 007 506-002 1
1GA 007 506-391 1
1GA 997 506-371 1
1GA 997 506-377 18
Type of protection: IP5K4K
FF®-H3 work light with grommet
Type of protection: IP6K4K and IPX9K
FF®-H3 work light
with AMP plug connector and protction cap
FF®-H3 work light
with AMP plug connector and cap
Self-service box
FF®-H3 work light
with DEUTSCH plug connector and cap
FF®-H3 work light
with magnet holder, vibration damping,
PG-screw connection, 3500 mm long
connecting lead with 2-pole plug
and 12V35W bulb
1GA 998 525-001 1
Spare parts/Accessories:
Light unit
H3 bulb,
8GH 002 090-271 1 12V35W
8GH 002 090-133 1 12V55W
8GH 002 090-251 1 24V70W
9GH 993 984-001 1 Cap for AMP plug connector
8HG 004 806-001 1 Magnet bracket
8JA 001 915-001 1 Plug, 2-pole
8JD 008 151-011 10 Socket for AMP plug connector
8KW 701 235-033 100 Blade receptacles, 6.3 mm
Mounting bracket for tubular mount on
8HG 990 263-111 1 15 mm - 28 mm dia. pipes
2000 mm long connecting lead
8KB 990 299-001 1 for AMP plug connector with cap
2000 mm long connecting lead
8KB 990 299-011 1 for DEUTSCH plug connector with protection cap
Accessories see page 4.123 - 4.125
LHT 11
4.85
Pk.
Work Lights
4