HELLA - Lighting catalogue

Work Lights
External-fitting work lights
AS 200 Xenon
Lens pattern for wide close-range illumination.
With gas discharge bulb. Light aperture: 123 x 123 mm.
Recommended angle of inclination: 10° - 25°.
Lens with plastic reflector bonded.
Black plastic body with extending edge to protect lens.
With red decorative ring. Handle recessed into body.
Xenon electronic unit 42W integrated into body.
Pivot base with bracket for four-point mounting.
Type of protection: IP5K4K and IPX9K.
Part no.
Pk.
1GA 996 142-001 1
1GA 996 142-011 1
1GA 996 142-021 1
Xenon-work light
with 12V ballast unit, AMP plug connector
and 3100 mm long connecting lead
with relay and fuse
with 24V ballast unit, AMP plug connector
and 3100 mm long connecting lead
with relay and fuse
with 12V ballast unit, DEUTSCH plug connector
and 3100 mm long connecting lead
with relay and fuse
1GA 996 142-311 1
with 24V ballast unit,
DEUTSCH plug connector and black
decorative ring, without connecting lead
Spare parts/Accessories:
1GA 990 305-001 1 Light unit
8GS 007 949-101 1 D2S gas discharge bulb, 35W
9GH 993 984-001 20 Cap for AMP plug connector
3700 mm long connecting lead with relay,
8KB 990 299-121 1 15A fuse and AMP plug connector, 24V
3700 mm long connecting lead with relay and
fuse for DEUTSCH plug connector,
8KB 990 299-221 1 12V
8KB 990 299-231 1 24V
8JS 711 687-821 1 Blade-type fuses, 15A (5 pcs.)
8JD 008 151-011 10 Socket for AMP plug connector
8KW 701 235-033 100 Blade receptacles, 6.3 mm
8HG 990 320-001 1 Bracket attachment foot
Mounting bracket for tubular mount on
8HG 990 263-111 1 15 mm - 28 mm dia. pipes
1GA 996 142-141 1
Xenon-work light
with 24V ballast unit, PG-screw connection
and 3000 mm long connection lead,
without relay and fuse. Sealed version
1GA 996 142-241 1
with 230V ballast unit,
PG-screw connection and 10.000 mm
rubber lead with ground contact.
Suitable in connection with current generator
230V-VSG 40W
Spare parts/Accessories:
1GA 990 305-001 1 Light unit
8GS 007 949-101 1 D2S gas discharge bulb, 35W
1GA 996 142-041 1
with 12V ballast unit, magnet holder,
PG-screw connection and 2500 mm long
connection lead with plug 8JA 001 915-001.
(Suitable sockets in compliance with DIN 4165)
Spare parts/Accessories:
1GA 990 305-001 1 Light unit
8GS 007 949-101 1 D2S gas discharge bulb, 35W
8HG 004 806-001 1 Magnet holder with fixing material
9XD 130 261-001 5 Mounting bracket for magnet holder
8JS 711 687-821 1 Blade-type fuses, 15A (5 pcs.)
8JA 001 915-001 10 Plug, 2-pole
4.80 LHT 11