HELLA - Lighting catalogue

Work Lights
Built-in work lights
Picador 6082 with FF® reflector
Lens pattern for ground illumination.
Light aperture: 125 x 75 mm.
Recommended angle of inclination: 20° - 25°.
Lens with plastic reflector bonded.
Black plastic lens-retaining rim.
Lens-retaining rim with extending edge to protect lens.
With two 3.9 x 55 mm fixing screws. Distance between screws: 142 mm.
Foam rubber seal for sealing dust and water-tight to outside on
even attachment surfaces. Front inclination 5.2°.
Mounting aperture: 130 x 76 mm.Type of protection: IP5K4K.
Part no.
Pk.
1GA 996 082-001 1 FF®-H3 work light
8GH 002 090-271 1
Accessories:
H3 bulb,
12V35W
8GH 002 090-133 1 12V55W
8GH 002 090-251 1 24V70W
External-fitting work lights
Flatbeam LED
Lens pattern for close-range illumination.
Light aperture: 165 x 90 mm. With 60 LEDs 11W and 2000 mm lead.
Plastic body and reflector.
Plastic lens without optical pattern.
2 fixing screws M5.
Voltage range: 12V - 24V.
Part no.
Pk.
1GD 996 193-001 1 LED work light
Light aperture: 172 x 86 mm.
Black plastic body.
For Fendt.
Part no.
Pk.
1GD 003 690-287 1 H3 work light
8GH 002 090-271 1
Accessories:
H3 bulb,
12V35W
8GH 002 090-133 1 12V55W
8GH 002 090-251 1 24V70W
4.76 LHT 11