HELLA - Lighting catalogue

Work lights
for upright or pendant mounting
Double-Beam with FF®-reflector
Lens pattern for intensive close-range illumination.
With grommet. Light aperture: 136 x 88 mm.
Recommended angle of inclination: 25° - 35°.
Double reflector made of diecast aluminium, glued to glass lens.
Black plastic body with extending edge to protect lens.
With 250 mm long silicone connection lead.
Pivot base with bracket for four-point mounting.
Without vibration damping. Type of protection: IP5K4K.
Part no.
Pk.
1GA 006 991-021 1
FF®-H3 work light
with handle
1GA 006 991-091 1 without handle
1GA 998 524-001 1
Spare parts/Accessories:
Light unit
9XD 990 298-001 5 Bracket for four-point fixing
H3 bulb,
8GH 002 090-271 1 12V35W
8GH 002 090-133 1 12V55W
8GH 002 090-251 1 24V70W
Double-Beam with FF®-reflector
Lens pattern for far-reaching off-road illumination.
With grommet. Light aperture: 136 x 88 mm.
Recommended angle of inclination: 5° - 15°.
Double reflector made of diecast aluminium, glued to glass lens.
Black plastic body with extending edge to protect lens.
With 250 mm long silicone connection lead.
Pivot base with bracket for four-point mounting.
Without vibration damping. Type of protection: IP5K4K.
Part no.
1GA 006 991-061 1
Accessories see page 4.123 - 4.125
FF®-H3 work light
with handle
1GA 006 991-051 1 without handle
9XD 990 298-001 5
Spare parts/Accessories:
Bracket for four-point fixing
H3 bulb,
8GH 002 090-271 1 12V35W
8GH 002 090-133 1 12V55W
8GH 002 090-251 1 24V70W
Work Lights
LHT 11
4.71
Pk.
4