HELLA - Lighting catalogue

Light Series
Built-in work lights
Oval 100 Xenon
Lens pattern for close-range illumination. With gas discharge bulb.
Light aperture: 130 x 75 mm.
Recommended angle of inclination: 10° - 15°.
Reflector made of die-cast aluminium, glued to hardened glass lens.
Black plastic body with extending edge to protect lens.
Two 4.0 x 40 mm fixing screws.
Mounting area: 142 x 92 mm. Type of protection: IP5K4K.
Part no.
Pk.
1GA 996 361-581 1
Xenon work light
with single reflector and 24V ballast unit
Spare parts/Accessories:
5DV 007 810-171 1 Ballast unit, 24V
8GS 007 949-101 1 D2S gas discharge bulb, 35W
8JD 156 151-807 1 Socket set for ballast unit (20 pcs.)
Oval 100 with FF® reflector
Lens pattern for wide close-range illumination..
Light aperture: 130 x 75 mm.
Recommended angle of inclination: 10° - 15°.
Reflector made of die-cast aluminium, glued to hardened glass lens.
Black plastic body with extending edge to protect lens.
Two 4.0 x 40 mm fixing screws.
Mounting area: 142 x 92 mm. Type of protection: IP5K4K.
Part no.
Pk.
1GA 996 161-111 1
1GA 996 161-351 1
FF®-H3 work light
with double reflector, AMP plug connector
and 12V55W bulbs
with single reflector, AMP plug connector
and 12V55W bulb
9GH 993 984-001
Spare parts/Accessories:
20 Cap for AMP plug connector
H3 bulb,
8GH 002 090-271 1 12V35W
8GH 002 090-133 1 12V55W
8GH 002 090-251 1 24V70W
8JD 008 151-011 10 Socket for AMP plug connector
8KW 701 235-033 100 Blade receptacles, 6.3 mm
2000 mm long connecting lead
8KB 990 299-001 1 for AMP plug connector with cap
4.50 LHT 11