Cooper B-Line - Ruff-IN Pre-Fab Systems ... - Cooper Industries

BLFRITRI-09 

Ruff-IN 

Pre-Fab Systems

Introduction 

Table of Contents 

Table of Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 

Ruff-IN & Total Ruff-IN Service Advisors . . . . . . . . . . . . . . . . . . . . . 3 

Explanation of Offerings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 

Quick Ship Program . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 

Configurator Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 & 7 

Pictorial Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 & 9 

Ruff-IN Section 

Croc-Lok Box Mounting Brackets & Assemblies . . . 10 & 11 

Telescoping Slider Brackets & Assemblies . . . . . . . . . . . . 12 & 13 

Floor Mount Box Supports & Assemblies . . . . . . . . . . . . . 14 & 15 

Double Sided Box Support Brackets & Assemblies . . 16 & 17 

Single Side Box Support & Assemblies . . . . . . . . . . . . . . . . . . . . . . 18 

Uni-Mount Box Support & Assemblies . . . . . . . . . . . . . . . . . . . . 19 

Multiple Box Mounting Bracket & Assemblies . . . . . . . . 20 & 21 

Open Box Support Bracket & Assemblies . . . . . . . . . . . . . 22 & 23 

Conduit & Box Support Fasteners . . . . . . . . . . . . . . . . . . . . . . 24 & 25 

Electrical Box T-Bar Fasteners & Assemblies . . . . . . . . . 26 & 27 

T-Bar Fan / Fixture Support . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28 

Plaster Rings with Wiring Devices . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29 

Ruff-IN MC Cable Solutions Section 

Total Ruff-IN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31 

Introduction & Step 1 - Send in drawings . . . . . . . . . . . . . . . . . . . 32 

Step 2 - Project Questionnaire . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33 

Step 3 - Quotation Package . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34 

Step 4 - Approval Package . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35 

Room Drawing Explanation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36 

Labeling & Packaging . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37 

Ruff-In Assemblies w/ MC Cable - Option 1 . . . . . . . . . . 38 & 39 

Ruff-In Assemblies w/ MC Cable - Option 2 . . . . . . . . . . 40 & 41 

MC Cable Whips . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42 & 43 

Accessories 

SpecSeal ® Powershield (Firestop Pads) . . . . . . . . . . . . . . . . . . . . . 44 

Metal Protector Plates . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45 

Adjustable Plaster Rings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46 

Plaster Rings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47 

Boxes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48 

Conduit/Cable Connectors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49 

Wiring Devices - Receptacles . . . . . . . . . . . . . . . . . . . . . . . . . . . 50 & 51 

Wiring Devices - Switches . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52 & 53 

ArrowLink Modular Wiring Devices . . . . . . . . . . . . . . . . . . 54 & 55 

www.cooperbline.com/Ruff-IN 

2 

Introduction Ruff-IN Total Ruff-IN Accessories 

We Give You 

Total Flexibility

How The Service Advisor Works 

3 

Service Advisors 

Ruff-IN Service Advisor 

B-Line knows that your time is important! That’s why the color-coding system in this catalog is designed to help you 

select products that fit your service needs. Products are marked to indicate the typical lead time for orders of Ruff-IN 

assemblies. 

Customer: How do I select my brackets, boxes, plaster rings, and devices so that I get the quickest turnaround? 

Service Advisor: Each part of our selection chart is shown in colors. If any section of a part number is a different 

color, the part will typically ship with the longer lead time represented by the colors. 

Basic Ruff-IN = 3 to 5 day lead time for quantities of 1000 or less 

Ruff-IN w/Wiring Devices = 10 to 15 day lead time for quantities of 500 or less. 

Non Stock Components = Call factory for lead time. 

Example: BB216TS - 2 10 40 A - P GBW Call factory for lead time 

(from page 5) because of the Non Stock 

Lead time(days) 3-5 3-5 3-5 3-5 3-5 3-5 call wiring device. 

factory 

Changing the part number from GBW to EBW will change the coding to yellow for the wiring device. 

The new lead time for the assembly would be 10-15 working days because of the standard device. 

Ruff-IN MC Cable Solutions Service Advisor 

New Service Advisor 

Ruff-IN with MC Cables Service Advisor 

■ MC Cable Whips Only = 3-5 days for Quantities of 1000 or less 

■ Ruff-IN with MC cable = 15-20 days for Quantities of 1000 or less 

■ Total Ruff-IN Quotation = 1-5 days* 

■ Total Ruff-IN Order = 10-20 days* 

* Lead time varies depending on the project scope 

Introduction

Introduction 

Explanation of Offerings 

B-Line Has The Total Pre-Fab Offering… 

No matter what your preference for pre-fab may be, B-Line has it! Choose the pre-fab offering 

below that best fits your needs: 

Basic Ruff-IN 

Offering Contents: Bracket, Box, Mud Ring, Ground Wire 

• Ideal solution for a contractor sampling pre-fab for the first time 

that wants to keep the control of his or her project. 

• Published lead times of 3-5 days ARO, and NEXT DAY 

SHIPPING ON (16) QUICK-SHIP ASSEMBLIES. 

Ruff-IN with Wiring Devices 

Offering Contents: Bracket, Box, Mud Ring, Wiring Assembly, Device or ArrowLink 

Connector, Protective Cover Plate 

• Assemblies are pre-wired for quick plug-and-play installation 

using Wago or wire nut connectors. 

• Choose from over 100 cataloged device options 

• Cooper Wiring Device's ArrowLink connector is offered in a 

pre-wired Ruff-IN assembly. 

• Using the Ruff-IN Configurator, design each part number 

included in your project BOM, then click on icons to instantly 

view assembly and wire configuration drawings. 

Ruff-IN with MC cables 

Offering Contents: Basic Ruff-IN with Wiring Assembly, Device or ArrowLink 

Connector, Protective Cover Plate, MC Cable whip with 

MC connector(s) 

• Pre-wired Ruff-IN assemblies with devices and a pre-cut MC 

cable whip attached. 

• Whip lengths available in 5-foot increments. 

• Includes option to order MC cable whips only. 

• Offering explained further on pages 38-43. 

Total Ruff-IN 

Offering Contents: Engineering Take-off Service, Ruff-IN Assemblies, and 

MC Cable Whips 

• Perfect for a contractor interested in trying pre-fab for the first time 

that needs the engineering and assembly expertise of B-Line. 

• Industry leading, published lead times for Total Ruff-IN quotation 

responses and order assembly. 

• For more details, see pages 30-37. 

4

5 

Programs 

Quick Ship Program 

Next Day Shipping Available on 16 Ruff-In Assemblies 

• No need to request a lead time, order today and we’ll 

ship out of stock tomorrow! 

BBF18-1104DA BB76-1104D BB216TS-1104D 

Croc-Lok w/ box 

Ruff-IN Quick Ship Pre-Fab Assemblies 

CBL Part # UPC # Description Maximum 

BBF Series Floor-mount 

Order Qty. 

BBF18-1104DA 78205154072 18" BBF floor-mount, 1-gang 5 /8" plaster ring, TP403 box, stranded ground wire 300 

BBF18-1104D 78205154065 18" BBF floor-mount, 1-gang 5 /8" plaster ring, TP403 box, solid ground wire 150 

BBF18-1124DA 78205155119 18" BBF floor-mount, 1-gang 3 /4" plaster ring, TP403 box, stranded ground wire 150 

BBF18-1124D 78205154176 18" BBF floor-mount, 1-gang 3 /4" plaster ring, TP403 box, solid ground wire 150 

Double-Sided Box Support 

BB76-1104DA 78205155200 6" Double-sided box support 1-gang 5 /8" plaster ring, TP403 box, stranded ground wire 300 

BB76-1104D 78205138768 6" Double-sided box support 1-gang 5 /8" plaster ring, TP403 box, solid ground wire 150 

BB76-1124DA 78205154049 6" Double-sided box support 1-gang 3 /4" plaster ring, TP403 box, stranded ground wire 150 

BB76-1124D 78205138771 6" Double-sided box support 1-gang 3 /4" plaster ring, TP403 box, solid ground wire 150 

Telescoping Slider Bracket 

BB216TS-1104DA 78205139289 16" Telescoping Slider Brkt,1-gang 5 /8" plaster ring, TP403 box, stranded ground wire 300 

BB216TS-1104D 78205138619 16" Telescoping Slider Brkt, 1-gang 5 /8" plaster ring, TP403 box, solid ground wire 150 

BB216TS-1124DA 78205139292 16" Telescoping Slider Brkt, 1-gang 3 /4" plaster ring, TP403 box, stranded ground wire 150 

BB216TS-1124D 78205138621 16" Telescoping Slider Brkt, 1-gang 3 /4" plaster ring, TP403 box, solid ground wire 150 

Croc-Lok & Telescoping Bracket 

BB2CL-1104DA 78205151940 Croc-Lok w/ box, 1-gang 5 /8" plaster ring, TP403 box, stranded ground wire 300 

BB2CL-1104D 78205151938 Croc-Lok w/ box, 1-gang 5 /8" plaster ring, TP403 box, solid ground wire 150 

BB2CL-1124DA 78205151942 Croc-Lok w/ box, 1-gang 3 /4" plaster ring, TP403 box, stranded ground wire 150 

BB2CL-1124D 78205151941 Croc-Lok w/ box, 1-gang 3 /4" plaster ring, TP403 box, solid ground wire 150 

BB2-16T 78101104256 16" Telescoping Bracket -- 

BB2-24T 78101101664 24" Telescoping Bracket -- 

Boxed BBF18 Series 

Boxed BB216TS Series 

Need a way to separate yourself from the competition? 

• Ruff-IN assemblies can be stocked at your 

local distributor. 

• Ask your Cooper B-Line Sales Representative 

for more information on stock-able Ruff-IN 

assemblies. 

Introduction

Introduction 

Ruff-IN Configurator 

Introducing Cooper B-Line’s Ruff-IN Configurator - 

Developed to be the ideal solution for creating a project bill of material. 

Download the Ruff-IN configurator at www.cooperbline.com/ruff-in and see for yourself how easy it is 

to navigate through the component selection process! 

Create Assembly Selection Tab 

For assemblies that 

include wiring devices, 

the configurator 

provides a wiring 

configuration drawing 

that details exactly how 

the wiring device will 

be wired in the 

assembly. 

Wiring Configuration Drawing 

Note: Voice Demo Training Video Tutorial is available at 

www.cooperbline.com/ruff-in 

6 

Determine project 

savings when using 

Ruff-IN assemblies 

by clicking on the 

link to the Ruff-IN 

Labor Savings 

Calculator

Organize Project 

BOMs to ship by 

specific room and/or 

floor 

Click to automatically 

request a quote for 

your project! 

3-D Assembly Drawing 

Ruff-IN Configurator 

7 

Instantly view a 3-D 

assembly drawing of 

your configured 

assembly 

Project Rooms/Floors Tab 

Project Summary Tab 

Introduction

Introduction 

Croc-Lok Box Mount Bracket 

Pages 10 & 11 

Single Sided Box Support 

Page 18 

Conduit & Box Support Fasteners 

Pages 24 & 25 

Pictorial Index 

Total Ruff-IN Steps 1 & 2 

Send in Drawings and Complete Project 

Questionnaire Pages 32 & 33 


Assemblies with MC Cable - Option 1 

38 &39 

Telescoping Slider Bracket 

Pages 12 & 13 

Uni-Mount Box Support 

Page 19 

Electrical Box T-Bar Fasteners 

Pages 26 & 27 

Ruff-IN Contractor Review Sheet (PF-APPROVALFORM-RUFFIN) 

Job Name: 

PO #: 

B-Line Order #: 

Initial for Approval 

Shipdate for Complete Order 

(For multiple shipdate option see page 2) 

CONTRACTOR SUGGESTED DATE 


Project Scope 

Attachment: 

CONTRACTOR SIGNATURE OF APPROVAL FOR ASSEMBLY DRAWINGS 

I certify the assembly drawings and other quantities presented on _____________ have been reviewed and are correct. 

I am aware that any changes requested and/or made to these drawings could extend the project lead time. 

Contractor Name Contractor Signature 

CONTRACTOR SIGNATURE OF APPROVAL FOR ROOM DRAWINGS 

I certify the room drawings detailing assembly and whip location within each room that are presented on ___________ 

have been reviewed and are correct. I am aware that any changes requested and/or made to these drawings could 

extend the project lead time. Contractor Name Contractor Signature 

* Fax this sheet to (618-654-9191, ATTN: Ruff-IN 

* Email approval to bline.ruffin@cooperindustries.com is also acceptable 

Total Ruff-IN Steps 3 & 4 

Quotation & Approval Packages 

Pages 34 & 35 


Assemblies with MC Cable - Option 2 

Pages 40 & 41 

Floor Mount Box Support 

Pages 14 & 15 

Multiple Box Mounting Bracket 

Pages 20 & 21 

8 

Fan/Fixture Hanger Assembly 

Page 28 

Double Sided Box Support 

Pages 16 & 17 

Open Box Support Bracket 

Pages 22 & 23 

Plaster Rings With Wiring Devices 

Page 29 

Room Drawing Explanation, 

Labeling & Packaging 

Pages 36 & 37 



Pages 42 & 43

Firestop Pads 

Page 45 

Cable & Conduit Connectors 

Page 49 

Protector Plates 

Page 46 

Adj. Plaster Rings 

Page 47 

Wiring Devices - Receptacles 

Pages 50 & 51 

Wiring Devices - Switches 

Pages 52 & 53 

• ArrowLink is available with every bracket option that includes the choice 

to add a wiring device. Each brochure page includes information on how 

ArrowLink can be added to an assembly. 

• Assemblies will be pre-wired with ArrowLink connector end included to 

allow for quick cable installation. 

• Assemblies include a cover plate attached to the mud ring for additional 

protection. 

• The ArrowLink Modular devices are sold 

separately. See your local Cooper Wiring 

Device representative for details. 

• For more information on ArrowLink 

Modular Devices see pages 54 & 55. 

ArrowLink Modular Wiring Devices with Ruff-IN Pre-Fab Assemblies 

The ArrowLink Connector end is now available as an accessory in the Ruff-IN Pre-Fab Systems offering. 

Pages 54 & 55 

9 

Pictorial Index 

Plaster Rings 

Page 47 

Electrical Boxes 

Page 48 

Introduction


UPC/Part 

Number 

Croc-Lok Box Mounting Bracket 

BB216TCL 

BB2CL 

New 

Catalog 

Number 

BB2CL-4D BB2CL-2104DA-WAAR 

BB2CL 

installed on 

BB2-16T 

Features 

Telescoping Bar with Croc-Lok Assemblies 

• The tool-less design enables Croc-Lok assemblies to be field 

installed in less than 4 seconds. Simply squeeze, secure 

and walk away. 

• Outlet boxes mount to the Croc-Lok with single screw. 

• The Croc-Lok Box Mounting Bracket is an improved version 

of the current BB2TS Slider Bracket. 

• Recently redesigned to include raised dimples that lock into 

holes on the telescoping bar. 

• Redesign includes screw holes in the face plate, which 

create the option to screw the Croc-Lok to a telescoping bar 

Stud 

Spacing 

Features 

• The Croc-Lok Box Mounting Bracket is an improved version of the 

current BB2TS Slider Bracket. 

• The narrow width of the Croc-Lok allows for up to three - 4” boxes 

to be installed within a 16” stud spacing, and up to four - 4” boxes 

within a 24” stud spacing. 

• Its design offers placement flexibility by locking in place firmly at any 

position along the telescoping bar. 

• Croc-Lok box assemblies are sold with or without telescoping bars. 

To reduce the lines on your BOM consider ordering Croc-Lok box 

assemblies and field install. 

• Croc-Lok box assemblies can be attached before or after the 

telescoping bar is mounted in the stud wall. 

• Download the Ruff-IN configurator for free at 

www.cooperbline.com/ruff-in and see for yourself how much easier 

it allows you to create Ruff-IN part numbers. 

Read safety/installation instruction sheets in packages before use. These products are designed for positioning only. No load rating. 

10 

Description 

782051 51291 BB2CL N/A Croc-Lok only 50 

782051 51292 BB216TCL 11” to 16” BB2-16T with Croc-Lok 20 

782051 51293 

Patent Pending 

BB224TCL 15” to 24” BB2-24T with Croc-Lok 20 

Note: Secures to Cooper B-Line BB2-16T and BB2-24T telescoping brackets only. For a standard 21 /8” deep box, the stud 

depth must be 31 /2” or greater. For a shallow 11 /2” deep box, the stud depth must be 21 /2” or greater. 

Box 

Qty 

Basic Ruff-IN = 3-5 day lead-time for quantities of 1000 or less. 

Ruff-IN with Wiring Devices = 10-15 day lead-time for quantities of 500 or less. 

Non Stock Components = Call factory for lead-time.

Croc-Lok Box Mounting Bracket Assemblies 

† Example Part Number 

BB216TCL - 1 10 4D A _ - _ _ _ _ _ _ - W AAR - _ _ _ _ - _ _ _ _ _ _ - _ _ 

BB2 - - - - - - 

1 2 3 4 5 

6 7 8 9 8 10 8 11 12 2 4 5 6 7 8 9 8 10 8 11 12 

Step 1 Step 2 Step 3 

Step 1 - Basic Ruff-In 

1 Stud Spacing 

BB216TCL = 11” to 18” Mounting Bar & 

Croc-Loc Assembly 

BB224TCL = 15” to 26” Mounting Bar & 

Croc-Loc Assembly 

BB2CL = Croc-Loc Assembly Only 

2 Plaster Ring Style (see ps. 47) 

1 = One Device 

2 = Two Device 

R = Round 

1AJ = One Device Adjustable * 

2AJ = Two Device Adjustable * 

Blank = Box Only 

Plaster Ring Size 

04 = 1 /4” Raise 

08 = 1 /2” Raise 

10 = 5 /8” Raise 

12 = 3 /4” Raise 

16 = 1” Raise 

20 = 11 /4” Raise 

24 = 11 3 

/2” Raise 

32 = 2” Raise 

Blank = Box Only or 

Adjustable Plaster Ring 

Box Style (see pg. 48) 

4D = 4” Sq., 21 /8” Deep 

436 = 4” Sq., 21 /8” Deep, 1” KO 

4 = 4” Sq., 11 /2” Deep 

432 = 4” Sq., 21 /8” Deep, 3 /4” KO 

5D = 411 /16” Sq., 21 /8” Deep 

560 = 411 /16” Sq., 21 /8” Deep, 1” KO 

5 = 411 /16” Sq., 11 /2” Deep 

554 = 411 /16” Sq., 21 /8” Deep, 3 4 

/4” KO 

5 Ground Wire 

(Pre-installed devices require stranded wire) 

Blank = Solid Ground Wire 

A = Stranded Ground Wire 

N = No Ground Wire 

6 Firestop Pad (see pg. 45) 

Blank = No Pad 

F = Pad Installed 

For Installation Of One Box For Installation Of Second Box - If Desired 

Step 2 - Connectors 

7 Connector Top Left KO 

Blank = No Attachment 

L = Attachment Present 

Connector Type (see pg. 49) 

Blank = None 

A = QLK50S ( 1 /2” single MC) 

B = QLK50D ( 1 /2” double MC) 

C = QLK75 ( 3 /4” single MC) 

D = SSBC50 ( 1 /2” EMT Connector) 

E = SSBC75 ( 3 8 

/4” EMT Connector) 

F = SSBC100 (1” EMT Connector) 

9 Connector Top Middle KO 


M = Attachment Present 

10 Connector Top Right KO 


R = Attachment Present 

* One device adjustable plaster 

rings are set at 3 /4” raise and can 

be adjusted to 1 1 /2” raise. 

Two device adjustable plaster rings 

are set at 5 /8” raise and can be 

adjusted to 1 1 /2” raise. 

Adjustable plaster ring can only 

be used on 4” sq. - 2 1 /8” deep 

† BB216TCL-1104DA-WAAR BB216TCL-1104DA-24DA-WAAR 


11 


Step 3 - Wiring Devices 

Wire Configuration 

P = Pigtails w/4 Hole 1Wago ® 

11 

(all receptacles installed w/ground up) 

R = Pigtails w/4 Hole Wago 

(all receptacles installed w/ground down) 

W = No Pigtails Wires Contained Inside 

Box (all receptacles installed w/ground up) 

Y = No Pigtails Wires Contained Inside Box 


M = Pigtails w/ Bare Wire Ends extending from 

top KOs, Twist-On Wire Connectors Inside Box 


N = Pigtails w/ Bare Wire Ends extending from 



Note: P, R, M and N configurations not available 

if KO connectors are installed on the outlet box 

12 

Device Type or ArrowLink 

Connector Options 

Standard Device Type 

(see pgs. 50-53) 

3 Letter Designator For 1 Device 

Two 3 Letter Designators For 2 Different Devices 

One 3 Letter Designator For 2 Of The Same Device 

ArrowLink Connector Options 

(for more information see pgs. 54-55) 

boxes.New 

MCR = ArrowLink Connector, Receptacle/GFCI 

MCS = ArrowLink Connector, Single-Pole Switch 

Ruff-IN


BB216TS 

BB224TS 

Telescoping Slider Brackets 

UPC/Part 

Number 

Catalog 

Number 

Telescoping Slider Bracket Assemblies 

Features 

• The industry’s only fully adjustable pre-fab bracket - fits 

a range of stud spacings and both 11/2” and 21/8” deep 

boxes. 

• Box can be attached to slider bracket before or after 

slider is installed on telescoping bracket. 

• Box location can be field-adjusted by moving slider 

along telescoping bracket. 

• Pre-assembled units available with two (2) boxes 

if desired. 

Stud 

Spacing 

Features 

• Ruff-In assemblies available with box, plaster ring and 

ground wire. 

• Wiring devices available installed with 21/8” deep boxes. 

• Metal protector plate provided with all wiring device 

assemblies. 

• Fire stop pad and cable/conduit connectors can also be 

pre-installed if desired. 

• Next day shipping available on (4) BB216TS assemblies, 

see page 5 for more information on the Ruff-IN Quick 

Ship Program. 


www.cooperbline.com/ruff-in and see for yourself how 

much easier it allows you to create Ruff-IN part 

numbers. 


12 

Description 

782051 38614 BB216TS 11” to 18” BB2-16T with Slider Bracket 20 

782051 38628 BB224TS 15” to 26” BB2-24T with Slider Bracket 20 

782051 38613 

Patent # 7,472,875 

BB2TS -- Slider Bracket Only 50 

BB216TS-1104D 

BB216TS-2104D-14DN 

BB216TS-2104DA-LARA-WKAV-14DN 

† BB216TS-2104DA-PGBW 

Box 

Qty

Telescoping Slider Bracket Assemblies 

† Example Part Number from page 12 

BB216TS - 2 10 4D A _ - _ _ _ _ _ _ - P GBW - _ _ _ _ - _ _ _ _ _ _ - _ _ 

BB2 - - - - - - 

1 2 3 4 5 

6 7 8 9 8 10 8 11 12 2 4 5 6 7 8 9 8 10 8 11 12 



1 Stud Spacing 

BB216TS = 11” - 18” 

BB224TS = 15” - 26” 

2 Plaster Ring Style (see pg. 47) 



R = Round 





04 = 1 /4” Raise 

08 = 1 /2” Raise 

10 = 5 /8” Raise 

12 = 3 /4” Raise 

16 = 1” Raise 

20 = 11 /4” Raise 

24 = 11 3 

/2” Raise 

32 = 2” Raise 




4D = 4” Sq., 21 /8” Deep 

436 = 4” Sq., 21 /8” Deep, 1” KO 

4 = 4” Sq., 11 /2” Deep 

432 = 4” Sq., 21 /8” Deep, 3 /4” KO 

5D = 411 /16” Sq., 21 /8” Deep 

560 = 411 /16” Sq., 21 /8” Deep, 1” KO 

5 = 411 /16” Sq., 11 /2” Deep 

554 = 411 /16” Sq., 21 /8” Deep, 3 4 

/4” KO 

5 Ground Wire 








For Installation Of One Box For Installation Of Second Box - If Desired 






Blank = None 





E = SSBC75 ( 3 8 

















boxes. 


13 




P = Pigtails w/4 Hole 1Wago ® 

11 
















12 




(see pgs. 50-53) 










Non Stock Components = Call factory for lead-time. 

New 



BBF18 

BBFC 

Floor Mount Box Supports 

BBFxxC 

Patent Pending 

Features 

• New BBF floorstand provides the most rigid support in the industry. 

• Far-side support accommodates 6”, 51/2”, 31/2”, and 21/2” stud depths. 

• Fold-out tab built-in to attach floor stand to stud if desired. 

• Integral “wings” provide rigid support when floorstand is mounted between studs. 

• Optional cable containment clip securely attaches to floorstand without hardware. 

• Finish: Pre-galvanized. 

UPC/Part 

Number 

Catalog 

Number 


14 

Box Center 

Height 

Box 

Qty 

782051 52944 BBF15 15” Floorstand 25 



782051 52947 BBFC Cable Containment Clip 25 

782051 52948 BBF15C 15” Floorstand 

with Cable Containment Clip 

25 



25 



25 

Floor Mount/Single Side Box Support Combo Assemblies 

BBF24-31104DA-2104DA 

Features 

New 


• Bottom kick plate depth shortened to slide under stud track more easily. 

• Double-sided bracket can be ganged to floor stand for multiple box applications. 

• Patented Marty-Mouse ears enable boxes to be secured in place with or without 

the plaster rings. 

• Available in three (3) bracket sizes - 15”, 18”, and 24”. 

• Next day shipping available on (4) BBF18 assemblies, see page 5 for 

more information on the Ruff-IN Quick-Ship Program. 

• Download the Ruff-IN configurator for free at www.cooperbline.com/ruff-in 

and see for yourself how much easier it allows you to create Ruff-IN part 

numbers.

1 

BBF15 = 15” 

BBF18 = 18” 

BBF24 = 24” 

Floor Mount Box Support & Assemblies 

† Example Part Number shown below 

BBF18 _ - _ 2 10 4D A _ - _ _ _ _ - W GDW - _ _ _ _ - _ _ _ _ - _ _ _ _ 

1 2 3 4 5 6 7 8 9 10 11 12 13 14 



Box Height 

2 Cable Containment 

C = Include cable containment 

Blank = Do not include cable containment 

Stud Depth for Optional Second Box 

Blank = No additional bracket 

3 = 31 /2” & 21 /2” 

4 = 4”, 31 /2” & 21 /2” 

5 = 6”, 51 /2”, 31 /2” & 21 3 

/2” 




R = Round 





04 = 1 /4” Raise 

08 = 1 /2” Raise 

10 = 5 /8” Raise 

12 = 3 /4” Raise 

16 = 1” Raise 

20 = 11 /4” Raise 

24 = 11 5 

/2” Raise 

32 = 2” Raise 




4D = 4” Sq., 21 /8” Deep 

436 = 4” Sq., 21 /8” Deep, 1” KO 

4 = 4” Sq., 11 /2” Deep 

432 = 4” Sq., 21 /8” Deep, 3 /4” KO 

5D = 411 /16” Sq., 21 /8” Deep 

560 = 411 /16” Sq., 21 /8” Deep, 1” KO 

5 = 411 /16” Sq., 11 /2” Deep 

554 = 411 /16” Sq., 21 /8” Deep, 3 /4” KO 

431 = 4” Sq., 21 6 

/8” Deep, Int. MC Connectors 

Blank = Plaster Ring Only 

For Installation Of One Box 

Step 1 - Basic Ruff-In (cont.) 

7 Ground Wire 













Blank = None 





E = SSBC75 ( 3 10 

















boxes. 





15 

4 6 7 8 9 10 11 12 13 14 


For Installation Of Second Box - If Desired 


13 Wire Configuration 

P = Pigtails w/4 Hole Wagos 
















14 




(see pgs. 50-53) 








† BBF18-2104DA-WGDW 

New 

BBF15C-1104DA-UMCR 



Double Sided Box Support Bracket 

with patented ‘Marty-Mouse Ears’ 

Features 

• Double side box support designed for Pre-Fab installations. Unit can be 

installed on either side of stud without repositioning box or devices. 

• Patented Marty-Mouse Ears feature an innovative keyhole pattern to secure 

outlet box to bracket with or without plaster ring. 

• Marty-Mouse Ears simplify wiring of pre-fab units. Plaster ring can be 

removed for full access to box contents while box remains in place. 

• Wider box opening accommodates one or two gang adjustable plaster rings 

(B1AJ & B2AJ - see pg. 47). 

• Enhanced far-side support stands up during drywall installation and out 

performs competitor brackets. 

• Finish: Pre-Galvanized 

Double Sided Box Support Bracket Assemblies 

BB73-1104D 

BB73-2104D 

BB74 

shown 

UPC/Part 

Number 

Catalog 

Number 

Features 

• Ruff-In assemblies available with box, plaster ring and ground wire. 


• Metal protector plated provided with all wiring device assemblies. 

• Fire stop pad and cable/conduit connectors can also be pre-installed 

if desired. 

• Next day shipping available on (4) BB76 assemblies, see page 5 for 

more information on the Ruff-IN Quick-Ship Program. 



numbers. 


16 

Stud Size 

Box 

Qty 

781011 38645 BB73 3 1/2” & 2 1/2” 50 

781011 38717 BB74 4”, 3 1/2” & 2 1/2” 50 

781011 38759 BB76 6”, 5 1/2”, 3 1/2”, 2 1/2” 25 

Patent # 5595362 

BB76-1104D BB73-2104D-LAMARA BB73-2104D-LAMARAPWAAW † BB73-2104DA-PAAW


Stud Depth 

BB73 = 31 /2” & 21 /2” 

BB74 = 4”, 31 /2” & 21 /2” 

BB76 = 6”, 51 /2”, 31 /2 & 21 1 

/2” 




R = Round 





04 = 1 /4” Raise 

08 = 1 /2” Raise 

10 = 5 /8” Raise 

12 = 3 /4” Raise 

16 = 1” Raise 

20 = 11 /4” Raise 

24 = 11 3 

/2” Raise 

32 = 2” Raise 




4D = 4” Sq., 21 /8” Deep 

436 = 4” Sq., 21 /8” Deep, 1” KO 

4 = 4” Sq., 11 /2” Deep 

432 = 4” Sq., 21 /8” Deep, 3 /4” KO 

5D = 411 /16” Sq., 21 /8” Deep 

560 = 411 /16” Sq., 21 /8” Deep, 1” KO 

5 = 411 /16” Sq., 11 /2” Deep 

554 = 411 /16” Sq., 21 /8” Deep, 3 /4” KO 

431 = 4” Sq., 21 4 



5 Ground Wire 








Double Sided Box Support Bracket 


BB73 - 2 10 4D A _ - _ _ _ _ _ _ - P AAW 

BB7 - - - 

1 2 3 4 5 6 7 8 9 8 10 8 11 12 







Blank = None 





E = SSBC75 ( 3 8 

















boxes. 


17 



P = Pigtails w/4 Hole Wago 
















12 




(see pgs. 50-53) 








BB76-1104DA-PMCR 

(cover plate not shown) 




New 



Single Sided Box Support & Assemblies 

BB4-23 

BB4-4 

BB4-6 

BB423-1104DN 

BB423-1104D 

† BB46-1104D 

Features 

• Improved far-side support prevents box movement in wall cavity. 

• Adjustable far-side supports designed to reduce labor. 

• Brackets may be piggy-backed in series.. 


• Not recommended for pre-installed wiring devices. 

See pages 16-17 for an improved Pre-Fab assembly solution. 



numbers. 

UPC/Part 

Number 

Catalog 

Number 

Single Sided Box Support Bracket Assemblies 

BB4 - 

1 2 3 4 5 6 


18 

Stud Size 

Box 

Qty 

781011 18190 BB4-23 31/2” & 21/2” 100 

781011 18200 BB4-4 4”, 31/2” & 21/2” 100 

781011 18202 BB4-6 6”, 51/2”, 31/2”, 21/2” 100 

Stud Depth 

BB423 = 31 /2” & 21 /2” 

BB44 = 4”, 31 /2” & 21 /2” 

BB46 = 6”, 51 /2”, 31 /2 & 21 1 

/2” 




R = Round 




04 = 1 /4” Raise 

08 = 1 /2” Raise 

10 = 5 /8” Raise 

12 = 3 /4” Raise 

16 = 1” Raise 

20 = 11 /4” Raise 

24 = 11 3 

/2” Raise 

32 = 2” Raise 




BB46 - 1 10 4D _ _ 


4D = 4” Sq., 21 /8” Deep 

436 = 4” Sq., 21 /8” Deep, 1” KO 

4 = 4” Sq., 11 /2” Deep 

432 = 4” Sq., 21 /8” Deep, 3 /4” KO 

5D = 411 /16” Sq., 21 /8” Deep 

560 = 411 /16” Sq., 21 /8” Deep, 1” KO 

5 = 411 /16” Sq., 11 /2” Deep 

554 = 411 /16” Sq., 21 /8” Deep, 3 /4” KO 

431 = 4” Sq., 21 4 5 Ground Wire 









* One device adjustable plaster rings are set 

at 3 /4” raise and can be adjusted to 1 1 /2” raise. 

Adjustable plaster ring can only be used on 

4” sq. - 2 1 /8” deep boxes. 


Non Stock Components = Call factory for lead-time.

Uni-Mount Box Support & Assemblies 

Features 

• Uni-Mount provides a secure box support and features a built-in 

plaster ring. 

• Rigid bracket design eliminates the need for far-side support. 

• Guide tabs ensure alignment on studs. 


• Fire stop pad can be pre-installed in boxes if desired. 

• Not recommended for pre-installed wiring devices. 

See pages 16-17 for an improved Pre-Fab assembly solution. 



numbers. 

UPC/Part 

Number 

Catalog 

Number 

Uni-Mount Box Support Assemblies 


19 

Plaster 

Ring 

Box 

Qty 

782051 22768 BB40-08 1/2” raise 50 

782051 22771 BB40-10 5/8” raise 50 

782051 22772 BB40-12 3/4” raise 50 

782051 22773 BB45-08 1/2” raise 50 

782051 22774 BB45-10 5/8” raise 50 

782051 22775 BB45-12 3/4” raise 50 

1 Plaster Ring Style 

BB40 = One Device 

BB45 = Two Device 


08 = 1 /2” Raise 

10 = 5 /8” Raise 

12 = 3 2 

/4” Raise 


BB45 - 10 - 4D _ _ 

BB4 - - 

1 2 3 4 5 


4D = 4” Sq., 21 /8” Deep 

436 = 4” Sq., 21 /8” Deep, 1” KO 

4 = 4” Sq., 11 /2” Deep 

432 = 4” Sq., 21 /8” Deep, 3 /4” KO 

431 = 4” Sq., 21 3 


4 Ground Wire 







BB40-10-4DN 

† BB45-10-4D 



BB40-10 

BB45-8 



1 

1 

Multiple Box Mounting Brackets 

2 

2 

BB8-16 

BB8-24 

Features 

Multiple Box Mounting Bracket Assemblies 

BB816-104D-X-1-X 

BB816-104D-1-1-X 

BB816-104D-X-6-X 

3 

3 

4 

• Provides support for multiple boxes or plaster rings 

between studs 16” or 24” on center. 

• Available factory assembled with plaster rings and/or 

boxes with ground wire to reduce labor. 

• Custom factory assemblies are ordered by specifying 

plaster rings and/or boxes for each bracket position. 

UPC/Part 

Number 

BB816-104D-X-1WGBW-X † BB816-104D-X-1LARAWKAV-X 

Features 

• Custom factory assemblies are ordered by specifying box 

information for each position opening. 



• Metal protector plate provided with all wiring device assemblies. 

• Fire stop pad and cable/conduit connectors can be pre-installed in 

boxes if desired. 



much easier it allows you to create Ruff-IN part numbers. 


20 

Catalog 

Number 

Stud 

Spacing 

Box 

Qty 

781011 02898 BB8-16 16” 25 

781011 02900 BB8-24 24” 25 

BB816-104D-X-1PCAA-X

Multiple Box Mounting Bracket Assemblies 


BB816 -104D _ _ - X_______ _ - 1LARA__WKAV- X_______ _ - X_______ _ 

BB8 - - - - - 

1 2 3 4 5 6 7 8 9 8 10 8 11 12 6 7 8 9 8 10 8 11 12 6 7 8 9 8 10 8 11 12 6 7 8 9 8 10 8 11 12 

Step 1 Step 2 Step 3 Step 2 Step 3 Step 2 Step 3 Step 2 Step 3 


Position 1 Opening (if desired) Position 2 Opening (if desired) Position 3 Opening (if desired) Position Opening 4 (if desired) 

(on BB824 only) 


Stud Spacing 

BB816 = 16” 

BB824 = 24” 


04 = 1 /4” Raise 

08 = 1 /2” Raise 

10 = 5 /8” Raise 

12 = 3 /4” Raise 

16 = 1” Raise 

20 = 11 /4” Raise 

24 = 11 /2” Raise 

32 = 2” Raise 

Blank = Box Only or Adjustable Plaster Ring 


4D = 4” Sq., 21 /8” Deep 

436 = 4” Sq., 21 /8” Deep, 1” KO 

4 = 4” Sq., 11 /2” Deep 

432 = 4” Sq., 21 /8” Deep, 3 /4” KO 

5D = 411 /16” Sq., 21 /8” Deep 

560 = 411 /16” Sq., 21 /8” Deep, 1” KO 

5 = 411 /16” Sq., 11 /2” Deep 

554 = 411 /16” Sq., 21 /8” Deep, 3 /4” KO 

431 = 4” Sq., 21 Position 

1 = One Device and Box ∆ 

2 = Two Device and Box ∆ 

J = One Device Adjustable Ring & Box *∆ 

3 = One Device Plaster Ring Only 

4 = Two Device Plaster Ring Only 

5 = Box Only 

R = Round Plaster Ring and Box 

6 = One Device and Box, No Ground Wire 

7 = Two Device and Box, No Ground Wire 

8 = Round Plaster Ring and Box, 

No Ground Wire 

K = Adjustable Plaster Ring and Box, 


9 = Box Only, No Ground Wire 

X = No Attachments 

∆ Only Options 1, 2, & J can be used 

with wiring devices. 

Connector Top Left KO 




/8” Deep, Int. MC Connectors Blank = None 

A = QLK50S ( 

Ground Wire 





Firestop Pad (see pg. 45) 



1 /2” single MC) 




E = SSBC75 ( 3 1 6 

2 

3 

7 

8 

4 



5 




Note: If different box than called out in 


Step 1 is used in any position, enter the Blank = No Attachment 

designator for the box after the character 

of the position. 

For example ‘14D’ or ‘1432’. 



21 





R = Pigtails w/4 Hole Wagos 














12 




(see pgs. 50-53) 
















boxes. 

New 



1 

1 

Open Box Support Mounting Brackets 

Features 

Open Box Support Mounting Bracket Assemblies 

BB716-104D-X-1-X 

BB716-105D-2-X-2 

BB716-104D-X-2PGDVAAW-X 

2 

2 

3 

BB7-16 

3 

4 

BB7-24 

• B-Line’s new BB7 Series open box support secures 

boxes and plaster rings between studs 16” and 24” on 

center. 

• Open design allows infinite adjustability, box can be 

placed in any horizontal location. 

• Stamped markings at 1/4”, 1/2” and 1” increments allow 

the installer to easilylocate the desired box position. 

UPC/Part 

Number 

Features 


22 

Catalog 

Number 

Stud 

Spacing 

Box 

Qty 

781011 45325 BB7-16 16” 25 

781011 45328 BB7-24 24” 25 

• Custom factory assemblies are ordered by specifying box 

information and location for each position. 

• Ruff-In assemblies available with box, plaster ring and 

ground wire. 


• Metal protector plate provided with all wiring device 

assemblies. 

• Fire stop pad and cable/conduit connectors can be 

pre-installed in boxes if desired. 



much easier it allows you to create Ruff-IN part 

numbers. 

† BB716-104D-X-2PKAV-X

Open Box Support Mounting Assemblies 


BB716 -104D _ _ - X_______ _ - 2______PKAV-X_______ _ - ________ _ 

BB7 - - - - - 

1 2 3 4 5 6 7 8 9 8 10 8 11 12 6 7 8 9 8 10 8 11 12 6 7 8 9 8 10 8 11 12 6 7 8 9 8 10 8 11 12 

Step 1 Step 2 Step 3 Step 2 Step 3 Step 2 Step 3 Step 2 Step 3 

Position 1 Opening (if desired) Position 2 Opening (if desired) Position 3 Opening (if desired) Position Opening 4 (if desired) 

(on BB824 only) 



Stud Spacing 

BB716 = 16” 

BB724 = 24” 


04 = 1 /4” Raise 

08 = 1 /2” Raise 

10 = 5 /8” Raise 

12 = 3 /4” Raise 

16 = 1” Raise 

20 = 11 /4” Raise 

24 = 11 /2” Raise 

32 = 2” Raise 


4D = 4” Sq., 21 /8” Deep 

436 = 4” Sq., 21 /8” Deep, 1” KO 

4 = 4” Sq., 11 /2” Deep 

432 = 4” Sq., 21 /8” Deep, 3 /4” KO 

5D = 411 /16” Sq., 21 /8” Deep 

560 = 411 /16” Sq., 21 /8” Deep, 1” KO 

5 = 411 /16” Sq., 11 /2” Deep 

554 = 411 /16” Sq., 21 /8” Deep, 3 /4” KO 

431 = 4” Sq., 21 Position 

1 = One Device and Box ∆ 

2 = Two Device and Box ∆ 







∆ Only Options 1 and 2 can be used 

with wiring devices. 

If different box than called out in Step 1 

is used in any position, enter the designator 

for the box after the character of the position. 

For example ‘14D’ or ‘1432’. 

Connector Top Left KO 




Blank = None 

/8” Deep, Int. MC Connectors A = QLK50S ( 

Ground Wire 





Firestop Pad (see pg.45) 



1 /2” single MC) 




E = SSBC75 ( 3 1 6 

2 

3 

7 

8 

4 




5 










23 















12 




(see pgs. 50-53) 






New 





BRC51-S18-4DN 


BG812-S18-W2-4DN 

New 

Components that can be assembled: 

Features 

• Riveted assembly secures electrical boxes and conduit/cable 

runs on either side of the box. 

• Assemblies available with bat wing or beam fasteners for 

simple installation. 

• New BMC3 plate is available to support multiple conduit 

runs on either side of the box. 

• New “X” configuration available as a Ruff-IN Pre-Fab 

assembly and provides cable/conduit support from all 

knockouts. 





24 

† BG812-S18-W2-MC3-4DN 

Conduit/Cable Clamp Options Spanner Bar Options Support Clip Options Multiple Conduit Plate Option 

BG Series 

BP Series 

1 2 3 4 

BRC5 Series 

S18 

S18X with BW2 Support Clip 

New 

BW2 / BW6 MC3 

BU24 / BU58 

New


Basic Ruff-IN = 3-5 day lead-time for quantities 

of 1000 or less. 

Non Stock Components = Call factory for 

lead-time. 


BG812 - S18 W2 MC3 - _ _ 4D N 


(see pg. 47) 



R = Round 




1 2 3 4 5 6 7 8 

Conduit/Cable Clamp 

BG6 = 3 /8” conduit or MC/AC cable 

BG812 = 1 /2” or 3 /4” Conduit 

BG16 = 1” Conduit 

BP8 = 1 /2” EMT 

BP12 = 3 /4” EMT 

BP16 = 1” EMT 

BRC51 = up to 4 Runs of 

Cable Diameter .43” - .56” 

BRC53 = up to 7 Runs of 

Cable Diameter .56” - .69” 

Spanner Bar 

S18 = Single Combo Bar 

S18X - Double Combo Bar 

Support Clip 

W2 = Bat Wing for #12 - 1 /4” Rod 

W6 = Bat Wing for 3 /8” Rod 

U24 = Hammer on Beam Clamp 

for 1 /8” - 1 /4” Flange 

U58 = Hammer on Beam Clamp 

for 5 /16” - 1 Plaster Ring Size 

04 = 

/2” Flange 

Multiple Conduit Plate 

MC3 = Multiple Conduit Plate 

1 /4” Raise 

08 = 1 /2” Raise 

10 = 5 /8” Raise 

12 = 3 /4” Raise 

16 = 1” Raise 

20 = 11 /4” Raise 

24 = 11 /2” Raise 

32 = 2” Raise 



2 = 4” Octagon, 11 /2” Deep *** 

2D = 4” Octagon, 21 /8” Deep *** 

4D = 4” Sq., 21 /8” Deep 

436 = 4” Sq., 21 /8” Deep, 1” KO 

4 = 4” Sq., 11 /2” Deep 

432 = 4” Sq., 21 /8” Deep, 3 /4” KO 

5D = 411 /16” Sq., 21 /8” Deep 

560 = 411 /16” Sq., 21 /8” Deep, 1” KO 

5 = 411 /16” Sq., 11 /2” Deep 

554 = 411 /16” Sq., 21 /8” Deep, 3 1 6 

7 

2 

3 

/4” KO 

8 Ground Wire 

4 





25 









boxes. 

*** - Octagon box options are only available on those configurations where a plaster ring does not exist. 

BP8-S18X-W2-MC3-4N 



1 1 /2” 

Electrical Box T-Bar Fasteners 

BA50 

BA50D 

BA50A 

Features 

• Preassembled T-Bar fasteners speed installation. 

• Boxes have 1 /2” and 3 /4” knockouts. 

• BA50 & BA50D loading not to exceed 50 lbs. without independent 

support. 

BA50A loading not to exceed 25 lbs. without independent support. 




UPC/Part 

Number 

Electrical Box T-Bar Fastener Assemblies 

• Now available in any configuration as a Ruff-IN assembly. 

• Preassembled T-Bar fasteners speed installation. 

• BA50A adjusts to accommodate heights from 11 /2” to 83 /4”. 

• BA5024D & BA5034D include BA50E extender brackets. 


26 

Catalog 

Number 

Description 

Box 

Qty 

781011 96490 BA50 Box Hanger 25 

781011 96491 BA50D Box Hanger for Box 25 

with 1 1/2” Extension 

782051 18460 BA50A Adjustable Box 10 

Hanger for T-Bar 

BA5024 BA5034 BA5024D 

2 1 /8” 

BA5034D BA50A 

3 5 /8” 

Features 

1 1 /2” to 8 3 /4” 

3”

Electrical Box T-Bar Fastener Assemblies 

† BA5024D-4N 


(see pg. 47) 



R = Round 





BA50 24D - __ __ 4 N 

BA50 - 

1 2 3 4 5 

Bracket Type 

24 = BA50 Bar at 11 /2” Depth 

34 = BA50 Bar at 21 /8” Depth 

24D = BA50 Bar at 3” Depth ** 

34D = BA50 Bar at 35 Box Style (see pg. 48) 

2 = 4” Octagon, 1 

/8” Depth ** 

A = BA50A Adjustable Support 

1 /2” Deep *** 

2D = 4” Octagon, 21 /8” Deep *** 

4D = 4” Sq., 21 /8” Deep 

436 = 4” Sq., 21 /8” Deep, 1” KO 

4 = 4” Sq., 11 /2” Deep 

432 = 4” Sq., 21 /8” Deep, 3 /4” KO 

5D = 411 /16” Sq., 21 /8” Deep 

560 = 411 /16” Sq., 21 /8” Deep, 1” KO 

5 = 411 /16” Sq., 11 /2” Deep 

554 = 411 /16” Sq., 21 /8” Deep, 3 1 4 

/4” KO 


04 = 1 /4” Raise 

08 = 1 /2” Raise 

10 = 5 /8” Raise 

12 = 3 /4” Raise 

16 = 1” Raise 

20 = 11 /4” Raise 

24 = 11 3 

/2” Raise 

32 = 2” Raise 



27 









boxes. 

BA50A-4N 

Ground Wire 




** - Assembly includes 4” square box, 11 /2” extension ring, TP428, and BA50E extension brackets. 

*** - Octagon box options are only available on those configurations where a plaster ring does not exist. 



5 



Fan/Fixture Hanger Assembly 

UPC/Part 

Number 

Features 

• Preassembled fan/fixture hanger installs on T-Bar in less than 

30 seconds. 

• Positions and secures ceiling fans and light fixtures in 

suspended ceilings. 

• Includes KwikWire cable and clamps which attach to 

mounting clips for easy installation. 

• UL Listed for fan support up to 70 lbs. 

Fixture support up to 90 lbs. 35 lbs in Canada. 

• Finish: Pre-galvanized. 




Catalog 

Number 


28 

BA50F 

Boxed 

BA50F with 

KwikWire 

support 

Description 

781011 96492 BA50F Fan/Fixture Hanger 1 

Includes 4” x 1 1 /2” 

deep octagon box 

24” 

9.25” 


Box 

Qty

Features 

Plaster Rings With Wiring Devices 

• Creates an alternate installation method by allowing 

for the plaster ring and wiring device to be added 

after the bracket and box have been installed. 

• Plaster ring sizes available in 1 /4”, 1 /2”, 5 /8”, 3 /4”, 1”, 

11 /4”, 11 /2”, 2”, and an adjustable plaster ring. 

• Over 95 cataloged wiring devices available. 

• All assemblies include a cover plate. 




† BMR4-110A-TDFV 

Stud Depth 

4 = Plaster Ring For 4” Sq. Box 

5 = Plaster Ring For 411 1 

/16” Sq. Box 







04 = 1 /4” Raise 

08 = 1 /2” Raise 

10 = 5 /8” Raise 

12 = 3 /4” Raise 

16 = 1” Raise 

20 = 11 /4” Raise 

24 = 11 3 

/2” Raise 

32 = 2” Raise 

Blank = Adjustable Plaster Ring 


29 

BMR4-110A-TAAR 

BMR4-110A-ZDFV 


BMR 4 - 1 10 A - T DFV 

1 2 3 4 5 6 

4 Ground Wire 




T = Device With Bare Wire Leads, No Connectors 

Z = Device With Bare Wire Leads and Wago ® 

5 

Push Connectors 

6 Device Type see pg. 50-53) 



One 3 Letter Designator For 2 of the Same Device 









boxes. 






30

Ruff-IN MC Cable Solutions 

31 

Ruff-IN MC Cable Solutions


Introduction / Step 1 - Send In Drawings 

Cooper B-Line introduces TOTAL Ruff-IN 

The new standard for Engineered Total Solution offerings 

Total Ruff-IN is a service that incorporates engineering drawings into a room-by-room pre-fab system. 

Once your shipment is received, simply review the detailed room layout to see exactly where each 

assembly and whip should be installed. 

The entire process, including the project quotation, manufacturing process, and shipping is designed 

to meet or exceed industry leading lead times (see Lead Times posted page 3). 

TOTAL Ruff-IN Features 

• UL Approved pre-fab assemblies 

• Team of engineers prepared to interpret engineering drawings 

• Detailed assembly and room drawings 

• Room-by-room labeling and packaging 

Step 1: Send Engineering Drawings to Cooper B-Line 

Options to send in drawings 

Option 1: 

Email drawings (File size limit is 10meg) 

Email to: bline.ruffin@cooperindustries.com\ 

Option 2: 

Load drawings on B-Line FTP Site 

Secured log-in information available upon request 

from your local B-Line Sales Representative 

Option 3: 

Mail in drawings to 

Cooper B-Line 

Attn: Ruff-IN Product Manager 

509 West Monroe Street 

Highland, IL 62249 

32

Step 2: Project Questionnaire 

After engineering drawings have been received and reviewed, a Project 

Questionnaire spreadsheet (listed below) will be sent out to gather 

specific information that is needed for your Total Ruff-IN quotation. 

Ruff-IN Project Questionnaire 

Job Name: . . . . . . . . . . . . . . . . . . 

Purpose of quotation: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Bid Buy 

Can branches be routed through ceiling? . . . . . . . . . . . . . . . . . . . . . . . . 

Contact Person(s) . . . . . . . . . . . . 

Phone# . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 

Projected date for product needed on jobsite: . . . . . . . . . . . 

Yes No 

Interior Wall Depths (21 /2”, 31 /2”, 4”, 6”, other) . . . . . . . . . . . . . 

Ceiling Height (9’-0”, 9’-6”, 10’-0”, other) . . . . . . . . . . . . . . . . . 

MC Cable Type (standard, hospital, all-purpose) . . . . . . . . . . . . 

MC Cable . . . . . . . No Whips Whips attached to assembly Whips shipped separate 

Plaster Ring Depth(s): . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 

Bracket(s) for device w/wall height below 24” . . . . . . . . . . . . 

Exact device height . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 

Bracket(s) for device w/wall height above 24” . . . . . . . . . . . . 

Box Size (furnished with 21 /2” deep boxes) . . . . . . . . . . . . . . . . . . . . .4” square 5” square 

Internal connector (wago, wire nut, other) . . . . . . . . . . . . . . . . 

Circuits can or cannot share neutral wires? . . . . . . . . . . . . 

Device Style(s) (Standard, Decorative) . . . . . . . . . . . . . . . . . . . 

Device Grade (Construction, Commercial, Industrial, Hospital) . 

Device Orientation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Ground Up Ground Down 

Device Color (Ivory, White, Light Almond, Almond, other) . . . . . 

Standard Takeoff includes provisions for receptacles, switches, GFCI, and data boxes. 

What other applications should be included in the quote? 

Does drawing include proper scale and reference? . . . . . . . . . . . . . . . . Yes No 

Include Special Instructions Below: 

Step 2 - Project Questionnaire 

* An electronic copy of the Ruff-IN Project Questionnaire is available @ cooperbline.com/Ruff-IN 

33 



Step 3 - Quotation Package 

Step 3: Quotation Package 

Once the scope of the project is defined, a quotation package will be sent 

out with the following contents: 

1) Project Quote 

Each line item on the 

quote will include 

the device 

symbol as well 

as a detailed 

description. 

Every quote will 

include a total of 

MC cable used for 

your project. 

2) Scope of Project – 

Summary that explains how we have interpreted the provided engineering drawings for the 

project as well as an explanation of terms and conditions that are specific to your project. 

3) Assembly Drawings – 

Detailed assembly drawings for each line item quoted. 

(Assembly Drawings will not include MC cable) 

Version 1.1 has been released.... 

Additions to this update include the 

Croc-Lok and BBF Floor-Mount 

Bracket. 

To download the 

updated version, 

visit cooperbline.com/Ruff-IN 

34

Step 4 - Approval Package 

Step 4: Approval Package 

Before a pre-fab order can be accepted, the contents of the approval package must be 

reviewed and approved by the contractor. The approval form displayed below contains all 

required contractor sign-off and signature requests for the project: 

A) 

B) 

C) 

D) 

Job Name: 

PO #: 

B-Line Order #: 

Ruff-IN Contractor Review Sheet (PF-APPROVALFORM-RUFFIN) 


Shipdate for Complete Order 

(For multiple shipdate option see page 2) 


Project Scope 

CONTRACTOR SIGNATURE OF APPROVAL FOR ASSEMBLY DRAWINGS 

I certify the assembly drawings and other quantities presented on _____________ have been reviewed and are correct. 

I am aware that any changes requested and/or made to these drawings could change the project price and lead time. 

Contractor Name Contractor Signature 

CONTRACTOR SIGNATURE OF APPROVAL FOR ROOM DRAWINGS 

I certify the room drawings detailing assembly and whip location within each room that are presented on ___________ 

have been reviewed and are correct. I am aware that any changes requested and/or made to these drawings could change 

the project price and lead time. Contractor Name Contractor Signature 

* Fax this sheet to (618-654-9191, ATTN: Ruff-IN 

* Email approval to bline.ruffin@cooperindustries.com is also acceptable 

A) Ship date approval 

• Customers can choose from a single ship date, or a schedule of multiple ship dates 

for tour project. 

B) Project Scope approval 

• The initial draft of the Project Scope, which contains all terms and conditions specific 

to your project, is sent out with the quotation package for review. The ‘Initial for 

Approval Request’ secures the final draft of the Project Scope. 

C) Assembly Drawings approval 

• All assembly drawings are emailed out for review with the quotation package. The 

request for approval signifies that no further changes to the assemblies on the 

project are needed. 

D) Room Drawings approval (see page 36 for details) 

• Upon receipt of purchase order, detailed room drawings will be emailed explaining the 

location of each pre-fab assembly and mc cable whip for each specific room on a 

project. The request for approval signifies that the contractor is in agreement with 

each room drawing. 

35 

CONTRACTOR SUGGESTED DATE 

Attachment: 



Room Drawing Explanation 

All room drawings list the: 

1) Jobsite name 

2) Quote # 

3) Room # 

All pre-fab assemblies and MC Cable whips included 

in the room drawing contain a reference number that 

is also included on the label for the part and in the 

room drawing legend. 

36 

The room drawing legend links each pre-fab 

assembly within the appropriate MC cable whip 

within the room. 

Initial room drawings that are emailed 

will read 'Issued for Approval'. 

Drawings that are received with the 

shipment of assemblies will read 

‘Issued For Manufacturing'.

Labeling & Packaging 

Total Ruff-IN orders are packaged and shipped by room. Box labels and assembly labels, 

which are pictured and explained below, are provided for every box and assembly that is 

included in the order. 

Box Labeling & Packaging – 

■ Each box label contains: 

• Room Number 

• Box Number 

• Purchase Order Number 

Assembly Labels – 

■ Each assembly will contain a label that includes: 

• Part Number 

• UL Identification 

• Device Description (ex. Receptacle, White) 

• Assembly number that corresponds with room drawing 

WIRING ASSEMBLY - 24RY 

BB216TCL-1104DA-LSP-CDFW-2M15 

Receptacle, White, MCIG, 15 ft. 

‘Room 2A, Assembly #1’ 

37 



BB216TCL 

BB216TS 

Ruff-IN Assemblies with MC Cable - Option 1 

Ruff-IN Assemblies with MC Cable - Part Numbering Option 1 

Bracket Options 

Telescoping Bracket w/Croc-Lok 

BB2CL 

Telescoping Bracket w/Slider Bracket 

Floor-Mount Bracket 

BBF18 

BBFxxC 

Double-Sided Bracket 

BB74 

shown 

1 

Bracket Type 

■ BB216TCL - 16” Telescoping bracket with Croc-Lok bracket 

■ BB224TCL - 24” Telescoping bracket with Croc-Lok bracket 

■ BB2CL - Croc-Lok bracket only 

1 

Bracket Type 

■ BB216TS - 16” Telescoping Slider Bracket 

■ BB224TS - 24” Telescoping Slider Bracket 

1 

Bracket Type 

■ BBF15 - 15” Floor Mount Bracket 

38 

† BB2CL-1104DA-LSP215-ADFV 

■ BBF15C - 15” Floor Mount Bracket with Cable Containment 





1 

Bracket Type 

■ BB73 - Double Sided Bracket for 31 /2” & 21 /2” 

■ BB74 - Double Sided Bracket for 4”, 31 /2” & 21 /2” 

■ BB76 - Double Sided Bracket for 6”, 5 1 /2”, 3 1 /2” & 2 1 /2” 

Read safety/installation instruction sheets in packages before use. These products are designed for positioning only. No load rating.


† Example Part Number shown on page 38 

BB2CL - 1 10 4D A _ - L S P 2 _ 15 _ _ _ _ _ _ _ _ _ _ _ _ - A DFV 

1 2 3 4 5 6 7 8 9 10 11 12 13 8 9 10 11 12 14 8 9 10 11 12 15 16 

Step 1 - Basic 

1 Bracket Type 

See Page 38 




R = Round 

1AJ = One Device Adjustable ∆ 

2AJ = Two Device Adjustable ∆ 



04 = 1 /4” Raise 

08 = 1 /2” Raise 

10 = 5 /8” Raise 

12 = 3 /4” Raise 

16 = 1” Raise 

20 = 11 /4” Raise 

24 = 11 3 

/2” Raise 

32 = 2” Raise 




4D = 4” Sq., 21 /8” Deep 

436 = 4” Sq., 21 /8” Deep, 1” KO 

432 = 4” Sq., 21 /8” Deep, 3 /4” KO 

5D = 411 /16” Sq., 21 /8” Deep 

560 = 411 /16” Sq., 21 /8” Deep, 1” KO 

554 = 411 /16” Sq., 21 /8” Deep, 3 4 

/4” KO 


5 Ground Wire 





6 Firestop Pad see pg. 45) 



Step 1 Step 2 

For Installation Of One Box 

Step 3 

*Consult with your B-Line representative for available 

options to add an additional box to an assembly. 

Step 2 - Connectors/MC Cable 

7 Left KO 

L = Include Connector 

Blank = No Connector 

8 Connector Orientation 

Blank = Whip Not Attached To Box, 

Attach Connectors To Box 

T = Whip Should Be Attached To Box, 

No Connector On Opposite End 

S = Whip Should Be Attached To Box 

With Additional Connector On 

Opposite End Of Cable 

Left KO Connector Type (see pg. 49) 

P = 1 /2” Arlington 

Q = 3 9 

/4” Arlington 

10 Number of MC Cable 

Phase Connectors 

2 = 2 Connectors 



11 MC Cable Type 

Blank = Standard 

P = Isolated Ground (All-Purpose) 

H = Hospital 

12 Cable Length (Sold in 5-ft. 

Increments Only) 

5 = 5-Feet in Length 





13 Middle KO 

M = Include Connector 


14 Right KO 

R = Right Connector 



39 

Step 3 - Wiring Devices/ArrowLink 

15 Wiring Configuration 

A = Wires Contained Inside Box w/Wago 

Connectors (all receptacles installed w/ground 

up)* 

A1 = Wires Contained Inside Box w/Wago 


down)* 

B = Bare Wires Contained Inside Box w/Wire 

Nut Connectors (all receptacles installed 

w/ground up)* 

B1 = Bare Wires Contained Inside Box w/Wire 


w/ground down)* 

C = Wires Extending From Right KO w/Wago 


up)* 

C1 = Wires Extending From Right KO w/Wago 


down)* 

D = Bare Wires Extending From Right KO w/Wire 

Nut Connectors (all receptacles installed w/ground 

up)* 

D1 = Bare Wires Extending From Right KO w/Wire 


down)* 

* When Isolated Ground (MCAP) cable is 

selected, this wiring assembly does not 

include ground wires. 

16 Device Type or ArrowLink Connector 

See pages 50-53 for device or ArrowLink options. 

∆ One device adjustable plaster 








boxes. 




Ruff-IN Assemblies with MC Cable - Part Numbering Option 2 

Bracket Options 

Multiple Box Mounting Bracket 

BB8-16 

Open Box Support Bracket 

BB7-16 

BB8-24 

BB7-24 

1 

Bracket Type 

■ BB816 - 16” Multiple Box Mounting Bracket 

• Three (3) Box Mounting Slots 

■ BB824 - 16” Multiple Box Mounting Bracket 

• Four (4) Box Mounting Slots 

■ Download the Ruff-IN configurator for free at 

www.cooperbline.com/ruff-in and see for yourself 

how much easier it allows you to create Ruff-IN 

part numbers. 

1 

Bracket Type 

■ BB716 - 16” Open Box Support Bracket 

• Holds up to three (3) boxes 

■ BB724 - 16” Open Box Support Bracket 

• Holds up to four (4) boxes 

■ Download the Ruff-IN configurator for free at 

www.cooperbline.com/ruff-in and see for yourself 

how much easier it allows you to create Ruff-IN 

part numbers. 


40 

† BB816-104DA-1LSPH2-15-CDFW-X



BB816 -104DA_-X____________-____-1LSPH215______-C DFW- X 

1 2 3 4 5 6 7 8 9 10 11 12 13 11 12 14 11 12 15 16 6 7 8 9 10 11 12 13 11 12 14 11 12 15 16 

Step 1 Step 2 

Position Opening One (If Desired) 

Step 3 

Step 1 - Basic 

Bracket Type 

See Page 40 


04 = 1 /4” Raise 

08 = 1 /2” Raise 

10 = 5 /8” Raise 

12 = 3 /4” Raise 

16 = 1” Raise 

20 = 11 /4” Raise 

24 = 11 /2” Raise 

32 = 2” Raise 


4D = 4” Sq., 21 /8” Deep 

436 = 4” Sq., 21 /8” Deep, 1” KO 

432 = 4” Sq., 21 /8” Deep, 3 /4” KO 

5D = 411 /16” Sq., 21 /8” Deep 

560 = 411 /16” Sq., 21 /8” Deep, 1” KO 

554 = 411 /16” Sq., 21 /8” Deep, 3 /4” KO 

431 = 4” Sq., 21 1 

2 

3 



4 Ground Wire 









6 Position 

1 = One Device and Box 

2 = Two Device and Box 

J = One Device Adjustable Ring & Box ∆ 

3 = One Device Plaster Ring Only 

4 = Two Device Plaster Ring Only 

5 = Box Only 






K = Adjustable Plaster Ring and Box, 

No Ground Wire ∆ 

9 = Box Only, No Ground Wire 



7 Left KO 

L = Include Connector 


8 Connector Orientation 

Blank = Whip Not Attached To Box, 

Attach Connectors To Box 

T = Whip Should Be Attached To Box, 

No Connector On Opposite End 

S = Whip Should Be Attached To Box 

With Additional Connector On 

Opposite End Of Cable 

Left KO Connector Type (see pg. 49) 

P = 1 /2” Arlington 38 AST 

Q = 3 9 

/4” Arlington 40 AST 

10 MC Cable Type 


P = Isolated Ground (All-Purpose) 

H = Hospital 

11 Number of MC Cable 

Phase Connectors 




12 MC Cable Length (Sold in 5-ft. 

Increments Only) 






13 Middle KO 

M = Include Connector 


14 Right KO 

R = Right Connector 



41 

Step 2 Step 3 

Position Opening One (If Desired) 

*Consult with your B-Line representative if assembly 

requires a box in position opening three or four. 

Step 3 - Wiring Devices/ArrowLink 

15 Wiring Configuration 

A = Wires Contained Inside Box w/Wago 


up)* 

A1 = Wires Contained Inside Box w/Wago 


down)* 

B = Bare Wires Contained Inside Box w/Wire 


w/ground up)* 

B1 = Bare Wires Contained Inside Box w/Wire 


w/ground down)* 

C = Wires Extending From Right KO w/Wago 


up)* 

C1 = Wires Extending From Right KO w/Wago 


down)* 

D = Bare Wires Extending From Right KO w/Wire 


up)* 

D1 = Bare Wires Extending From Right KO w/Wire 


down)* 

* When Isolated Ground (MCAP) cable is 

selected, this wiring assembly does not 

include ground wires. 

16 Device Type or ArrowLink Connector 

See pages 50-53 for device or ArrowLink options. 

∆ Adjustable plaster rings cannot be used 

on the Open Box Support Bracket. 

One device adjustable plaster 








boxes. 




Cut To Length MC Cable Whips 

BCW12-2-BP-15 

† BCW12-2P-BP-15 

■ Available in 5 foot increments from 5 ft. to 25 ft. 

■ Stand alone cable whips can be ordered: 

• With connectors on both ends 

• With connectors on one end 

• Without connectors 

■ The sheath on all wire ends is pre-cut and stripped back 1 /2” (see below). 

Hospital Grade MC Cable 

Standard MC Cable 


42 

7 1/2” Wire Sheath 

BCW12-2H-BP-15 

Isolated Ground MC Cable 

1/2” Exposed Wire

1 

2 = 2 Conductors 



Number of Conductors 

2 Cable Type 


P = Isolated ground (all-purpose) 

H = Hospital 

3 Conductor Type 

Blank = Solid 

A = Stranded 


BCW - 2 P _ - B P 15 

1 2 3 4 5 6 

43 

Step 1 

Step 1 - Basic Whip 


4 Wire End Orientation 

Blank = Bare-ends 

C = Connector on one end 

B = Connector on both ends 


P = 1 /2” Arlington 38 AST 

Q = 3 5 

/4” Arlington 40 AST 

6 Cable Length 

5 = 5-feet in length 





For more information on innovative Ruff-IN products and 

valuable contractor sales tools visit cooperbline.com/ruff-in. 

Ruff-IN Configurator Ruff-IN Quick-Ship Program Ruff-IN Labor Savings Calculator 


Accessories 

Accessories 

44

Features 

• SpecSeal ® Power Shield electrical box inserts are used to protect 

an electrical box and maintain fire-resistance ratings of wall 

assemblies when the horizontal separation between metallic 

boxes on opposite sides of the wall is less than 24”. 

• The intumescent insert is designed to install inside the box, 

directly against the back wall. 

• SpecSeal ® Power Shield expands a minimum of 24 times its 

original size, when exposed to high temperatures or flames, to 

quickly seal off the passage of fire and smoke. 

• Simple to install. SpecSeal ® Power Shields are sized to fit typical 

outlet boxes and feature an adhesive strip on the back of the pad 

to ensure adhesion to the back of the electrical box. Installs 

quickly with no mess/residue. 

• The low profile design maximizes the area inside the electrical box. 

• Water resistant - no soluble or hygroscopic ingredients. 

UPC/Part 

Number 

Catalog 

Number 

Properties Electrical Box Inserts 


45 

Firestop Pads 

Size & Description 

782051 49195 EP44 3 3/4” x 3 3/4” x 1/8” for 4” Square Box 20 

782051 49196 EP45 4 1/2” x 4 1/2” x 1/8” for 4 11/16” Square Box 20 

SpecSeal ® is a registered trademark of Specified Technologies Inc. 

Color: Red 

Weight: EP44 - 0.08 lbs. (0.036 kg) 

EP45 - 0.10 lbs. (0.045 kg) 

Volume: EP44 - 1.75 cu in. (28.8 cu cm.) 

EP45 - 2.50 cu in. (41.0 cu cm.) 

Expansion Begins: 350°F (177°C) 

Expansion Range: 350°F to >1000°F (177°C - 537°C) 

Volume Expansion: 16 to 24X (free expansion) 

In Service Temperature:

Accessories 

BPS1 

BPS2 

BPR1 

UPC/Part 

Number 

Metal Protector Plates 

Catalog 

Number 

Features 

• Protects box contents from drywall mud, paint and debris. 

• Protector plates provided with all wiring device assemblies. 

• Can be installed on plaster rings with or without preinstalled 

wiring devices. 

• Protects pre-installed wiring devices from damage during 

drywall installation. 

• Improved design transmits force of drywall installation to 

the plaster ring - not the wiring device. 

• Domed plate for toggle switches allows for clearance 

between the plate and switch, and eliminates scratching 

of the devices. 

• Two protector plates are required for two device plaster 

rings. 


BPR2 

Devices 

46 

Plaster 

Ring Style 

782051 49197 BPR1 Receptacles, GFCI, Decorator, None One Device 50 

782051 38937 BPS1 Toggle Switches One Device 50 

782051 49199 BPR2 Receptacles, GFCI, Decorator, None Two Device 50 

782051 38938 BPS2 Toggle Switches Two Device 50 

Box 

Qty 

Basic Ruff-IN = 3-5 day lead-time for quantities of 1000 or less.

UPC/Part 

Number 

Adjustable & Standard Plaster Rings 

• Adjustable plaster ring can be used with 4” square, 21 /8” deep boxes and fits a range of drywall thicknesses. 

• Single gang plaster ring can be used in combination with Cooper B-Line’s BB4-23 series, BB73 Series, BB8-16 

Series, BFM Series, and BB2-16 Series. It is provided with a 3 /4” raise and can be adjusted to a 11 /2” raise. 

• Two gang plaster ring can be used in combination with Cooper B-Line’s BB2-16 Series and BB73 Series. It is 

provided with 5 /8” raise and can be adjusted to a 11 Features 

/2” raise. 

• The plaster ring can be adjusted after sheet rock, mud, or tile is installed without removing the wiring devices. 

B1AJ B2AJ B3AJ 

Stock Components 

Non Stock Components 

Catalog 

Number 

Description Depth 


47 

Box 

Qty 

Ruff-In 

Code 

782051 49200 B1AJ One Device Adjustable Ring 3/4” - 11/2” 25 1AJ 

782051 49201 B2AJ Two Device Adjustable Ring 5/8” - 11/2” 25 2AJ 

782051 53426 B3AJ Three Device Adjustable Ring 3/4” - 11/2” 25 3AJ 

782051 53427 BRAJ Round Device Adjustable Ring 3/4” - 11/2” 25 RAJ 

One Device Two Device Round 

Plaster Rings 

BRAJ 

Plaster Ring One Device Two Device Round 

Size Ruff-In Code Ruff-In Code Ruff-In Code 

1 /4” raise 104 204 R04 

1 /2” raise 108 208 R08 

5 /8” raise 110 210 R10 

3 /4” raise 112 212 R12 

1” raise 116 216 R16 

1 1 /4” raise 120 220 R20 

1 1 /2” raise 124 224 R24 

2” raise 132 232 R32 

Accessories

Accessories 

Electrical Boxes 

TP-403 TP-436 

TP-563 TP-560 

TP-548 TP-554 

TP-404 

TP-431 

Part 

Size Depth Capacity Side KO Bottom KO 

Ruff-In 

Number Code 

TP-403 4” Square 21 /8” 30.3 in3 (8) 1 /2”, (4) 1 /2” & 3 /4” E (2) 1 /2”, (2) 1 /2” & 3 /4” E 4D 

TP-436 4” Square 21 /8” 30.3 in3 (8) 1” (2) 1 /2”, (2) 1 /2” & 3 /4” E 436 

TP-404 4” Square 11 /2” 22.0 in3 (8) 1 /2”, (4) 1 /2” & 3 /4” E (2) 1 /2”, (2) 1 /2” & 3 /4” E 4 

TP-432 4” Square 21 /8” 30.3 in3 (8) 3 /4” (2) 1 /2”, (2) 1 /2” & 3 /4” E 432 

TP-431 4” Square 21 /8” 30.3 in3 (2) 1 /2” & 3 /4” E, (4) 1 /2”, (4) cable (1) 1 /2” 431 

TP-563 411 /16” Square 21 /8” 42.0 in3 (6) 1 /2”, (6) 1 /2” & 3 /4” E (3) 1 /2”, (2) 3 /4” 5D 

TP-560 411 /16” Square 21 /8” 42.0 in3 (8) 1” (3) 1 /2”, (2) 3 /4” 560 

TP-548 411 /16” Square 11 /2” 29.5 in3 (8) 1 /2”, (4) 3 /4” (3) 1 /2”, (2) 3 /4” 5 

TP-554 411 /16” Square 21 /8” 42.0 in3 (8) 3 /4” (3) 1 /2”, (2) 3 /4” 554 




48 

TP-432

MC Cable Connectors 

Part Number Ruff-In Code Size 

QLK50S A 1 /2” Single 

QLK50D B 1 /2” Duplex 

QLK75S C 3 /4” Single 

38AST 

40AST 

Cable & Conduit Connectors 

QLK50S 

QLK50D 

QLK75S 




49 

SSBC100 

SSBC75 

SSBC50 

EMT Conduit Connectors 


SSBC50 D 1 /2” 

SSBC75 E 3 /4” 

SSBC100 F 1” 

MC Cable Connectors 


38AST P 1 /2” Single 

40AST Q 3 /4” Single 

Accessories

Accessories 

Standard Duplex 

Receptacles 

5252W 

shown 

Tamper Resistant 

Duplex Receptacles 

Standard Duplex 

Receptacles 

IG5362RN 

shown 



Hospital Grade 


8200V 

shown 

Reference Data - Wiring Devices 

8300HV 

shown 

15 Amp 

15 Amp 

20 Amp 

20 Amp 

15 Amp 

20 Amp 



Item Description & Color Ruff-In Stock 

Stock Code Code 

5252B Receptacle - 15 Amp Industrial Grade, Brown DAB 

5252V Receptacle - 15 Amp Industrial Grade, Ivory DAV 

5252W Receptacle - 15 Amp Industrial Grade, White DAW 

5262CB Receptacle - 15 Amp Industrial Grade, Brown DBB 

5262CV Receptacle - 15 Amp Industrial Grade, Ivory DBV 

5262CW Receptacle - 15 Amp Industrial Grade, White DBW 

IG5262RN Receptacle - 15 Amp Industrial Grade, Isolated Ground, Orange DGO 

5262B Receptacle - 15 Amp Industrial Grade, Brass Strap, Brown EAB 

5262V Receptacle - 15 Amp Industrial Grade, Brass Strap, Ivory EAV 

5262W Receptacle - 15 Amp Industrial Grade, Brass Strap, White EAW 

CR5262B Receptacle - 15 Amp Construction Spec. Grade, Brown KBB 

CR5262V Receptacle - 15 Amp Construction Spec. Grade, Ivory KBV 

CR5262W Receptacle - 15 Amp Construction Spec. Grade, White KBW 

BR15B Receptacle - 15 Amp Commercial Grade, Brown DEB 

BR15V Receptacle - 15 Amp Commercial Grade, Ivory DEV 

BR15W Receptacle - 15 Amp Commercial Grade, White DEW 

TRBR15A Tamper Resistant Receptacle - Commercial Grade, Almond TAA 

TRBR15B Tamper Resistant Receptacle - Commercial Grade, Brown TAB 

TRBR15BK Tamper Resistant Receptacle - Commercial Grade, Black TAK 

TRBR15GY Tamper Resistant Receptacle - Commercial Grade, Gray TAG 

TRBR15L Tamper Resistant Receptacle - Commercial Grade, Light Almond TAL 

TRBR15V Tamper Resistant Receptacle - Commercial Grade, Ivory TAV 

TRBR15W Tamper Resistant Receptacle - Commercial Grade, White TAW 

5352B Receptacle - 20 Amp Industrial Grade, Brown DCB 

5352V Receptacle - 20 Amp Industrial Grade, Ivory DCV 

5352W Receptacle - 20 Amp Industrial Grade, White DCW 

5362CB Receptacle - 20 Amp Industrial Grade, Brown DDB 

5362CV Receptacle - 20 Amp Industrial Grade, Ivory DDV 

5362CW Receptacle - 20 Amp Industrial Grade, White DDW 

IG5362RN Receptacle - 20 Amp Industrial Grade, Isolated Ground, Orange DHO 

5362B Receptacle - 20 Amp Industrial Grade, Brass Strap, Brown EBB 

5362V Receptacle - 20 Amp Industrial Grade, Brass Strap, Ivory EBV 

5362W Receptacle - 20 Amp Industrial Grade, Brass Strap, White EBW 

CR5362B Receptacle - 20 Amp Construction Spec. Grade, Brown KAB 

CR5362V Receptacle - 20 Amp Construction Spec. Grade, Ivory KAV 

CR5362W Receptacle - 20 Amp Construction Spec. Grade, White KAW 

BR20B Receptacle - 20 Amp Commercial Grade, Brown DFB 

BR20V Receptacle - 20 Amp Commercial Grade, Ivory DFV 

BR20W Receptacle - 20 Amp Commercial Grade, White DFW 

TRBR20A Tamper Resistant Receptacle - Commercial Grade, Almond TBA 

TRBR20B Tamper Resistant Receptacle - Commercial Grade, Brown TBB 

TRBR20BK Tamper Resistant Receptacle - Commercial Grade, Black TBK 

TRBR20GY Tamper Resistant Receptacle - Commercial Grade, Gray TBG 

TRBR20L Tamper Resistant Receptacle - Commercial Grade, Light Almond TBL 

TRBR20V Tamper Resistant Receptacle - Commercial Grade, Ivory TBV 

TRBR20W Tamper Resistant Receptacle - Commercial Grade, White TBW 

8200B Receptacle - 15 Amp Hospital Grade, Nickel Plated Brass Strap, Brown FAB 

8200V Receptacle - 15 Amp Hospital Grade, Nickel Plated Brass Strap, Ivory FAV 

8200W Receptacle - 15 Amp Hospital Grade, Nickel Plated Brass Strap, White FAW 

8200HB Receptacle - 15 Amp Hospital Grade, Steel Strap, Brown FBB 

8200HV Receptacle - 15 Amp Hospital Grade, Steel Strap, Ivory FBV 

8200HW Receptacle - 15 Amp Hospital Grade, Steel Strap, White FBW 

IG8200RN Receptacle - 15 Amp Hospital Grade, Isolated Ground, Orange FFO 

8300B Receptacle - 20 Amp Hospital Grade, Nickel Plated Brass Strap, Brown FCB 

8300V Receptacle - 20 Amp Hospital Grade, Nickel Plated Brass Strap, Ivory FCV 

8300W Receptacle - 20 Amp Hospital Grade, Nickel Plated Brass Strap, White FCW 

8300HB Receptacle - 20 Amp Hospital Grade, Steel Strap, Brown FDB 

8300HV Receptacle - 20 Amp Hospital Grade, Steel Strap, Ivory FDV 

8300HW Receptacle - 20 Amp Hospital Grade, Steel Strap, White FDW 

IG8300RN Receptacle - 20 Amp Hospital Grade, Isolated Ground, Orange FEO 

50




6252B Decorator Receptacle - 15 Amp Commercial Grade, Brown GAB 

6252V Decorator Receptacle - 15 Amp Commercial Grade, Ivory GAV 

6252W Decorator Receptacle - 15 Amp Commercial Grade, White GAW 

6352B Decorator Receptacle - 20 Amp Commercial Grade, Brown GBB 

6352V Decorator Receptacle - 20 Amp Commercial Grade, Ivory GBV 

6352W Decorator Receptacle - 20 Amp Commercial Grade, White GBW 

TR6352A Commercial Grade, Almond TCA 

TR6352B Commercial Grade, Brown TCB 

TR6352BK Commercial Grade, Black TCK 

TR6352GY Commercial Grade, Gray TCG 

TR6352LA Commercial Grade, Light Almond TCL 

TR6352V Commercial Grade, Ivory TCV 

TR6352W Commercial Grade, White TCW 

VGFH15B GFCI - 15 Amp Hospital Grade, Brown JAB 

VGFH15V GFCI - 15 Amp Hospital Grade, Ivory JAV 

VGFH15W GFCI - 15 Amp Hospital Grade, White JAW 

VGF15B GFCI - 15 Amp Commercial Grade, Brown GCB 

VGF15V GFCI - 15 Amp Commercial Grade, Ivory GCV 

VGF15W GFCI - 15 Amp Commercial Grade, White GCW 

TRVG15A Tamper Resistant - GFCI - Commercial Grade, Almond TGA 

TRVG15B Tamper Resistant - Commercial Grade, Brown TGB 

TRVG15BK Tamper Resistant - Commercial Grade, Black TGK 

TRVG15GY Tamper Resistant - Commercial Grade, Gray TGG 

TRVG15LA Tamper Resistant - Commercial Grade, Lt Almond TGL 

TRVG15V Tamper Resistant - Commercial Grade, Ivory TGV 

TRVG15W Tamper Resistant - GFCI - Commercial Grade, White TGW 

VGFH20B GFCI - 20 Amp Hospital Grade, Brown JBB 

VGFH20V GFCI - 20 Amp Hospital Grade, Ivory JBV 

VGFH20W GFCI - 20 Amp Hospital Grade, White JBW 

VGF20B GFCI - 20 Amp Commercial Grade, Brown GDB 

VGF20V GFCI - 20 Amp Commercial Grade, Ivory GDV 

VGF20W GFCI - 20 Amp Commercial Grade, White GDW 

TRVG20A Tamper Resistant - GFCI - Commercial Grade, Almond THA 

TRVG20B Tamper Resistant - GFCI - Commercial Grade, Brown THB 

TRVG20BK Tamper Resistant - GFCI - Commercial Grade, Black THK 

TRVG20GY Tamper Resistant - GFCI - Commercial Grade, Gray THG 

TRVG20LA Tamper Resistant - GFCI - Commercial Grade, Lt Almond THL 

TRVG20V Tamper Resistant - GFCI - Commercial Grade, Ivory THV 

TRVG20W Tamper Resistant - GFCI - Commercial Grade, White THW 

51 

15 Amp 

20 Amp 

20 Amp 

15 Amp 

15 Amp 

20 Amp 

20 Amp 



VFG15W 

shown 

VGF20W 

shown 

Decorator 

Receptacles 

Decorator 

Receptacles 

6252B 

shown 

6352W 

shown 


Decorator 

Receptacles 

GFCI Receptacles 






Accessories

Accessories 

Toggle Switches 

CSB115B 

shown 

2221W 

shown 


Decorator Switches 15 Amp 

7601V 

shown 

7621B 

shown 

15 Amp 

20 Amp 

20 Amp 





1201B Single Pole Toggle Switch - 15 Amp Industrial Grade, Brown ADB 

1201V Single Pole Toggle Switch - 15 Amp Industrial Grade, Ivory ADV 

1201W Single Pole Toggle Switch - 15 Amp Industrial Grade, White ADW 

1202B Double Pole Toggle Switch - 15 Amp Industrial Grade, Brown AHB 

1202GY Double Pole Toggle Switch - 15 Amp Industrial Grade, Gray AHG 

1202V Double Pole Toggle Switch - 15 Amp Industrial Grade, Ivory AHV 

1202W Double Pole Toggle Switch - 15 Amp Industrial Grade, White AHW 

CSB115B Single Pole Toggle Switch - 15 Amp Commercial Grade, Brown BDB 

CSB115V Single Pole Toggle Switch - 15 Amp Commercial Grade, Ivory BDV 

CSB115W Single Pole Toggle Switch - 15 Amp Commercial Grade, White BDW 

CSB215B Double Pole Toggle Switch - 15 Amp Commercial Grade, Brown BGB 

CSB215GY Double Pole Toggle Switch - 15 Amp Commercial Grade, Gray BGG 

CSB215V Double Pole Toggle Switch - 15 Amp Commercial Grade, Ivory BGV 

CSB215W Double Pole Toggle Switch - 15 Amp Commercial Grade, White BGW 

1203B 3 Way Toggle Switch - 15 Amp Industrial Grade, Brown AEB 

1203V 3 Way Toggle Switch - 15 Amp Industrial Grade, Ivory AEV 

1203W 3 Way Toggle Switch - 15 Amp Industrial Grade, White AEW 

CSB315B 3 Way Toggle Switch - 15 Amp Commercial Grade, Brown BEB 

CSB315V 3 Way Toggle Switch - 15 Amp Commercial Grade, Ivory BEV 

CSB315W 3 Way Toggle Switch - 15 Amp Commercial Grade, White BEW 

2221B Single Pole Toggle Switch - 20 Amp Industrial Grade, Brown AAB 

2221V Single Pole Toggle Switch - 20 Amp Industrial Grade, Ivory AAV 

2221W Single Pole Toggle Switch - 20 Amp Industrial Grade, White AAW 

2222B Double Pole Toggle Switch - 20 Amp Industrial Grade, Brown AGB 

2222GY Double Pole Toggle Switch - 20 Amp Industrial Grade, Gray AGG 

2222RD Double Pole Toggle Switch - 20 Amp Industrial Grade, Red AGR 

2222V Double Pole Toggle Switch - 20 Amp Industrial Grade, Ivory AGV 

2222W Double Pole Toggle Switch - 20 Amp Industrial Grade, White AGW 

CSB120B Single Pole Toggle Switch - 20 Amp Commercial Grade, Brown BAB 

CSB120V Single Pole Toggle Switch - 20 Amp Commercial Grade, Ivory BAV 

CSB120W Single Pole Toggle Switch - 20 Amp Commercial Grade, White BAW 

CSB220B Double Pole Toggle Switch - 20 Amp Commercial Grade, Brown BHB 

CSB220GY Double Pole Toggle Switch - 20 Amp Commercial Grade, Gray BHG 

CSB220V Double Pole Toggle Switch - 20 Amp Commercial Grade, Ivory BHV 

CSB220W Double Pole Toggle Switch - 20 Amp Commercial Grade, White BHW 

2223B 3 Way Toggle Switch - 20 Amp Industrial Grade, Brown ABB 

2223V 3 Way Toggle Switch - 20 Amp Industrial Grade, Ivory ABV 

2223W 3 Way Toggle Switch - 20 Amp Industrial Grade, White ABW 

CSB320B 3 Way Toggle Switch - 20 Amp Commercial Grade, Brown BBB 

CSB320V 3 Way Toggle Switch - 20 Amp Commercial Grade, Ivory BBV 

CSB320W 3 Way Toggle Switch - 20 Amp Commercial Grade, White BBW 

7601B Single Pole Decorator Switch - 15 Amp Commercial Grade, Brown CDB 

7601V Single Pole Decorator Switch - 15 Amp Commercial Grade, Ivory CDV 

7601W Single Pole Decorator Switch - 15 Amp Commercial Grade, White CDW 

7603B 3 Way Decorator Switch - 15 Amp Commercial Grade, Brown CEB 

7603V 3 Way Decorator Switch - 15 Amp Commercial Grade, Ivory CEV 

7603W 3 Way Decorator Switch - 15 Amp Commercial Grade, White CEW 

7621B Single Pole Decorator Switch - 20 Amp Commercial Grade, Brown CAB 

7621V Single Pole Decorator Switch - 20 Amp Commercial Grade, Ivory CAV 

7621W Single Pole Decorator Switch - 20 Amp Commercial Grade, White CAW 

7623B 3 Way Decorator Switch - 20 Amp Commercial Grade, Brown CBB 

7623V 3 Way Decorator Switch - 20 Amp Commercial Grade, Ivory CBV 

7623W 3 Way Decorator Switch - 20 Amp Commercial Grade, White CBW 

52




RSF5-A/6005A Fan Speed Control Fully Variable 5A w/adj. trim, Almond RAA 

RSF5-LA/6005A Fan Speed Control Fully Variable 5A w/adj. trim, Light Almond RAL 

RSF5-V/6005A Fan Speed Control Fully Variable 5A w/adj. trim, Ivory RAV 

RSF5-W/6005A Fan Speed Control Fully Variable 5A w/adj. trim, White RAW 

TI0671-A/6441A 600W INC SP Dimmer, Almond RCA 

TI0671-LA/6441LA 600W INC SP Dimmer, Light Almond RCL 

RSF5-V/6005A 600W INC SP Dimmer, Ivory RCV 

RSF5-W/6005A 600W INC SP Dimmer, White RCW 

DI06P-A Slide w/preset 600W INC/MLV SP/3-way Dimmer, Almond RDA 

DI06P-LA Slide w/preset 600W INC/MLV SP/3-way Dimmer, Light Almond RDL 

DI06P-BK Slide w/preset 600W INC/MLV SP/3-way Dimmer, Black RDK 

DI06P-BR Slide w/preset 600W INC/MLV SP/3-way Dimmer, Brown RDB 

DI06P-V Slide w/preset 600W INC/MLV SP/3-way Dimmer, Ivory RDV 

DI06P-W Slide w/preset 600W INC/MLV SP/3-way Dimmer, White RDW 

SI06I-A Full Slide (non-preset) 600W INC/MLV SP Switch, Almond REA 

SI06I-LA Full Slide (non-preset) 600W INC/MLV SP Switch, Light Almond REL 

SI06I-V Full Slide (non-preset) 600W INC/MLV SP Switch, Ivory REV 

SI06I-W Full Slide (non-preset) 600W INC/MLV SP Switch, White REW 

SI06P-A Full Slide w/preset 600W INC/MLV SP/3-way Dimmer, Almond RFA 

SI06P-LA Full Slide w/preset 600W INC/MLV SP/3-way Dimmer, Light Almond RFL 

SI06P-V Full Slide w/preset 600W INC/MLV SP/3-way Dimmer, Ivory RFV 

SI06P-W Full Slide w/preset 600W INC/MLV SP/3-way Dimmer, White RFW 

6105V 

150 degrees, single pole, 900 sq. ft. fluorescent: 

(2) 30W min. 400W max. @ 120V. Rapid Start Incandescent: 

500W @ 120V, Motor: 

RBV 

1 /8HP A2 120V, Ivory 

150 degrees, single pole, 900 sq. ft. fluorescent: 

6105W (2) 30W min. 400W max. @ 120V. Rapid Start Incandescent: 

500W @ 120V, Motor: 

RBW 

1 /8HP A2 120V, White 

53 

5 Amp 

600 Watt 

600 Watt 



Switches 

Rotary Fan Speed Control 

RFS5-A / 6005V 

shown 

6441W 

shown 

DI06P-W 

shown 

SI06I-W 

shown 

SI06P-LA 

shown 

6105W 

shown 

Toggle Dimmer 

(non-preset) 

Decorator Dimmer 

Occupancy Sensor 

Accessories

Accessories 

1 

ArrowLink Modular Wiring Devices 

The benefits of modular 

devices foryourentire 

job, not just a portion. 

ArrowLink maximizes labor 

savings: 

• Breadth of line provides 

efficiency in more 

applications 

• Modular connections 

increase trim-out speed 

more than 2 to 1 

• Consistent connections 

eliminate mis-wiring and 

reduce call-backs 

• Connector leads are 

prepped, stripped and 

ready to wire 

• External connections 

provide job site flexibility 

• Reduces number of trim-out 

installers required 

• Narrows learning curve for 

apprentice labor 

ArrowLink Receptacle Modular Plug & Connector 

Devices that arrive the way you want! 

ArrowLink Modular Wiring Devices change the game for 

electrical installers by providing an unequalled breadth of 

devices that offer greater speed and consistency to lower 

installation costs on the job site. 

Modular 

Decorator 

& Toggle 

Switches 

54 

Modular 

GFCIs, 

Tamper 

Resistant 

GFCIs 

ArrowLink features bulk packaging designed with the contractor in mind. 

• All devices are shipped in convenient recyclable bulk pack cartons 

• All packaging made of 100% recycled material 

• Packaging sizedfor easy room-to-room transport 

• No inner packaging speeds installation, eliminates waste, and reduces 

clean-up at the endof the job 

• Incorporated “honeycomb” dividers allow a consistent package size across 

our entire ArrowLink product line for efficient shipping 

Modular 

TVSS 

Receptacles 

Modular 

Isolated 

Ground 

Receptacles 

Modular 

Straight 

Blade 

Single & 

Duplex 

Receptacles

Leaded 

ArrowLink plug 

preserves the 

structural 

integrity of the 

base wiring 

device 

Plug and 

connector design 

provides first 

make/last break 

grounding 

connection 

Terminal safety 

barriers provide 

insulation from 

conductive 

surfaces 

Audible click 

indicates a secure 

connection 

ArrowLink Modular Wiring Devices 

The ArrowLink 

Advantage 

Modular Receptacle 

Patent-pending ArrowLink 

modular plugs and connectors 

provide high quality circuit 

connections while reducing 

overall installation time. 

ArrowLink is designed to help you complete a job quickly 

and cost effectively. The breadth of line combined with 

unique installation flexibility and safety features provide 

a complete job solution. 

Plug leads 

#12 AWG 

stranded copper 

Polybag 

connector cover 

shields contacts 

from paint and 

drywall mud 

Pre-wired 

modular 

switches 

available in 

both toggle 

anddecorator 

styles for 

120V or 277V 

#12 AWG wire 

leads color 

coded for 

your 277V 

applications; 

see ordering 

info for 277V 

conductor 

color options 

Slim profile andvertical 

wire orientation of device 

andconnector assures 

ease of installation 

55 

Modular Switch 

Clearly marked, consistent 

pre-wiredconfigurations 

eliminatemis-wiring of 

devices 

Quality, 

Dependability 

and Versatility 

Connector 

leads #12 AWG, 

pre-stripped& 

available in 

solidor 

stranded 

copper 

Unique switch 

andreceptacle 

configurations 

will not 

inter-mate for 

added safety 

ArrowLink wiring 

devices can 

easily be 

convertedfor 

standard 

installation 

2 

Accessories

Cooper Industries, Ltd. 

600 Travis, Ste. 5800 

Houston, TX 77002-1001 

Phone: 713-209-8400 

www.cooperindustries.com 

Other Cooper B-Line Product Lines 

Strut Systems (Bolted Framing) 

Cable Tray Systems 

Electrical Enclosures 

Electronic Enclosures 

Pipe Hanger & Support Systems 

Spring Steel Fasteners 

Cable Runway & Relay Racks (CommData) 

Meter Mounting & Distribution Equipment 

Anchors 

Safety Gratings 

Cooper B-Line 

509 West Monroe Street 

Highland, IL 62249 

Phone: 800-851-7415 

Fax: 618-654-1917 

www.cooperbline.com 

Questions, Comments, Suggestions? 

“ S M 

B-VOCAL with Cooper B-Line” 

Voice Of the Customer...Actively Listening 

bvocal@cooperindustries.com 

618-654-2184 ext. 456 

SYSTEMS THAT MAKE SENSE 

© 2009 Cooper B-Line, Inc. Printed in U.S.A. 20909 

BLFRITRI-09 

1 Wago ® is a registered trademark of Wago Corporation, Inc.

Cooper B-Line - Ruff-IN Pre-Fab Systems ... - Cooper Industries

Create successful ePaper yourself

Delete template?

Save as template?