05.06.2013 Views

Prisma Plus PH System - Schneider Electric

Prisma Plus PH System - Schneider Electric

Prisma Plus PH System - Schneider Electric

SHOW MORE
SHOW LESS

You also want an ePaper? Increase the reach of your titles

YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.

DD384440<br />

Enclosures<br />

Catalogue numbers<br />

2<br />

DD383348<br />

DD383349<br />

Accessories<br />

Lifting rings<br />

Set of four lifting rings screwed to the framework.<br />

Use a set of lifting rings for each framework (W 700 mm) containing devices.<br />

When two cubicles with devices have been combined, use a lifting beam.<br />

Designation Cat. no.<br />

4 lifting rings NSYSFEB<br />

4 lifting brackets NSYSFELB<br />

Screws/Nuts<br />

Designation Cat. no.<br />

Set of 20 screws + M6 nuts 06461<br />

Earthing leads<br />

b Mandatory to ensure earth continuity of side panels, roof and door.<br />

b Material: terminal of brass and copper delivered with PVC cover, green and<br />

yellow.<br />

Length (mm) Section (mm²) Terminal (mm) Cat. no.<br />

160 6 8.3 NSYEL166D8<br />

350 25 8.3 NSYEL3525D8<br />

Note: composition set of 10 leads (nuts and washers not delivered).<br />

The wire is equipped with a 5 mm diameter lug at one end and a 6 mm diameter lug<br />

on the other.<br />

Designation Cat. no.<br />

Earthing wire, 6 mm² 08911<br />

The wire is equipped with a 5 mm diameter lug at one end and a 6 mm diameter lug<br />

on the other.<br />

The earthing wire is used to earth:<br />

b a door or wicket door with devices<br />

b a front-plate support frame equipped with switchgear in a cubicle.<br />

Coupling kit<br />

For coupling enclosures either side-by-side or back-to-back (1) :<br />

b Fixing system from the inside of the enclosure.<br />

b IP55 degree of protection.<br />

b Material:<br />

v flat flange: galvanised steel.<br />

v sealing gasket: EPDM.<br />

Designation Cat. no.<br />

Swing 19” rack coupling kit NSYSFBK19<br />

(1) Back to back association must be shipped individually and combined during on-site<br />

installation.<br />

version: 1.0 - 06/2010 401F_E23120.indd

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!