Prisma Plus PH System - Schneider Electric

DD384420
DD384421
Distribution
Catalogue numbers
04901 + 04943.
6
DD384422
DD383396
Form 3 partitioning
Form 3 partitioning
Front connection
Presentation
A horizontal metal partition can be used to physically separate functional units from
one another.
It is fixed at the rear by a support (two uprights) secured to the framework (500 mm
deep) or to the intermediate uprights (800 mm deep frameworks).
A set of brackets can be used to install partial Form 3 partitioning in the cubicle.
It does not take up any useful space in the switchboard.
Cat. no. selection
Designation Cat. no.
Horizontal metal partition, W 650 mm 04901
Rear support for partitions, W 650 mm 04943
6 universal angle brackets 03583
Rear connection
Presentation
For rear connection, in addition to the horizontal partitions, vertical partitions are
required at the rear of each functional unit.
There are two heights:
b 3 to 4 modules
b 5 to 6 modules.
Cat. no. selection
Designation Cat. no.
Vertical partitions (two cat. no. per
functional unit)
Vertical partitions for rear connected Compact NSX250.
3 to 4 modules 04955
5 to 6 modules 04956
version: 1.0 - 06/2010 401F_E22905.indd