Prisma Plus PH System - Schneider Electric
Prisma Plus PH System - Schneider Electric
Prisma Plus PH System - Schneider Electric
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
DD384407<br />
DD384408<br />
Distribution<br />
Catalogue numbers<br />
06545.<br />
06543.<br />
DD383356<br />
DD384441<br />
Form 2 partitioning<br />
Partitioning of lateral vertical busbars<br />
Lateral partitioning<br />
b<br />
b<br />
b<br />
v<br />
v<br />
b<br />
Vertical barrier made of insulating slats.<br />
Can be installed on both sides of Linergy and flat busbars.<br />
Made up of:<br />
five extruded slats that clip to the supports<br />
two metal plates at the top and bottom that can be cut out to pass a PE or PEN.<br />
The space between the slats is sufficient for prefabricated connections (one<br />
copper bar, 5 or 10 mm thick, or insulated flexible bars) or for cables up to 35 mm²,<br />
while maintaining the degree of protection IP2X compliance with standard IEC<br />
60695.2.1 concerning withstand to fire.<br />
Form 2 restoration for side-barrier cut-out<br />
This kit enables passage of the connection between a device > 1600 A (NW, INS)<br />
and lateral vertical busbars.<br />
It is made up of an insulated plate (six modules H 300 mm) that can be cut as<br />
required, supplied with supports and the necessary hardware.<br />
It can be installed at any height in the switchboard.<br />
Cat. no. selection<br />
Designation Cat. no.<br />
Form 2 side barrier for D 500 mm cubicle 06545<br />
Form 2 restoration kit 04924<br />
Partitioning extension<br />
For the <strong>PH</strong> system switchboards 800 mm depth (500 + 300), a partitioning extension<br />
for 300 mm depth is required.<br />
Designation Cat. no.<br />
Partitioning extension in 800 mm depth 06543<br />
401F_E22905.indd version: 1.0 - 06/2010<br />
3