Corrigendum - REACH24H Consulting Group

P406 PACKING INSTRUCTION P406
The following packagings are authorized, provided that the general provisions of 4.1.1 and 4.1.3 are met:
(1) Combination packagings
Copyright@United Nations, 2011. All rights reserved.
Outer packagings: (4C1, 4C2, 4D, 4F, 4G, 4H1, 4H2, 1G, 1D, 1H1, 1H2, 3H1 or 3H2)
Inner packagings: water-resistant packagings.
(2) Plastics, plywood or fibreboard drums (1H2, 1D or 1G) or boxes (4A, 4B, 4N, 4C1, 4D, 4F, 4C2, 4G and
4H2) with a water resistant inner bag, plastics film lining or water resistant coating.
(3) Metal drums (1A1, 1A2, 1B1, 1B2, 1N1 or 1N2), plastics drums (1H1 or 1H2), metal jerricans (3A1, 3A2,
3B1 or 3B2), plastics jerricans (3H1 or 3H2), plastics receptacle in steel or aluminium drums (6HA1 or
6HB1), plastics receptacle in fibre, plastics or plywood drums (6HG1, 6HH1 or 6HD1), plastics receptacle in
steel, aluminium, wood, plywood, fibreboard or solid plastics boxes (6HA2, 6HB2, 6HC, 6HD2, 6HG2 or
6HH2).
Additional requirements:
1. Packagings shall be designed and constructed to prevent the loss of water or alcohol content or the content of
the phlegmatizer.
2. Packagings shall be so constructed and closed so as to avoid an explosive over pressure or pressure build-up
of more than 300 kPa (3 bar).
3. The type of packaging and maximum permitted quantity per packaging are limited by the provisions of
2.1.3.6.
Special packing provisions:
PP24 UN 2852, 3364, 3365, 3366, 3367, 3368 and 3369 shall not be transported in quantities of more than 500 g
per package.
PP25 UN 1347 shall not be transported in quantities of more than 15 kg per package.
PP26 For UN Nos. 1310, 1320, 1321, 1322, 1344, 1347, 1348, 1349, 1517, 2907, 3317, 3344 and 3376
packagings shall be lead free.
PP48 For UN 3474, metal packagings shall not be used.
PP78 UN 3370 shall not be transported in quantities of more than 11.5 kg per package.
PP80 For UN Nos. 2907 and 3344, packagings shall meet the packing group II performance level. Packagings
meeting the test criteria of packing group I shall not be used.
P407 PACKING INSTRUCTION P407
This instruction applies to UN Nos. 1331, 1944, 1945 and 2254.
The following packagings are authorized, provided that the general provisions of 4.1.1 and 4.1.3 are met:
Outer packagings:
Drums (1A1, 1A2, 1B1, 1B2, 1N1, 1N2, 1H1, 1H2, 1D, 1G);
Boxes (4A, 4B, 4N, 4C1, 4C2, 4D, 4F, 4G, 4H1,4 H2);
Jerricans (3A1, 3A2, 3B1, 3B2, 3H1, 3H2).
Inner packagings:
Matches shall be tightly packed in securely closed inner packagings to prevent accidental ignition under
normal conditions of transport.
The maximum gross mass of the package shall not exceed 45 kg except for fibreboard boxes which shall not exceed
30 kg.
Packagings shall conform to the packing group III performance level.
Special packing provision:
PP27 UN 1331, Strike-anywhere matches shall not be packed in the same outer packaging with any other
dangerous goods other than safety matches or wax Vesta matches, which shall be packed in separate inner
packagings. Inner packagings shall not contain more than 700 strike-anywhere matches.
- 60 -