TKA MaxiTower plus - TS Labor

Pure water on
call high purity!
TKA Storage tanks
Quality throughout!
• Tank material: pure water resistant,
opaque to light and food-safe polypropylene
• The recirculation through MaxiTower
plus maintains the permanently low
conductivity and acts against bacterial
growth during standstills
• Automatic level control with water
volume indicator shown on the
MaxiTower display
• Large 00 mm service opening and
conical bottom (optional) to allow complete
and efficient cleaning and rinsing
• Optional sterile overflow, CO
absorber and sterile filter
Choice of 5 sizes.
100 Litres plain bottom conical bottom
Height, mm 680 800
Ø, mm 60 60
Cat. No.: 06.5100 06.5100-S
200 Litres plain bottom conical bottom
Height, mm 8 0 800
Ø, mm 560 650
Cat. No.: 06.5200 06.5200-S
300 Litres plain bottom conical bottom
Height, mm 8 0 800
Ø, mm 690 790
Cat. No.: 06.5300 06.5300-S
400 Litres plain bottom conical bottom
Height, mm 1050 1 90
Ø, mm 760 670
Cat. No.: 06.5400 06.5400-S
500 Litres plain bottom conical bottom
Height, mm 1100 1 90
Ø, mm 780 750
Cat. No.: 06.5500 06.5500-S
Further tank sizes on request.
Storage tank, 100 – 500 l
The best water
pretreatment!
TKA MixMulti XL
This system can be used even when the
feedwater condition is very difficult.
It not only softens the water but also
efficiently cleans it and so protects the
osmosis membranes from blockage. In
addition to calcium and magnesium,
it also removes iron and manganese, a
great variety of suspended matter and
organic material. The secret lies in the
combination of multiple adsorption
stages, from porous polymeric adsorbers
to ion exchangers.
MixMulti can be regenerated exactly
as a normal water softener, i.e. with a
conventional saturated sodium chloride
solution (8–10%).
built in
cabinet
➀ MixMulti XL Pretreatment unit
➁ Prefilter, 5 µm + activated carbon, 10’’
➂ Prefilter, 1 µm, 10’’
➃ Pure water filter, 0.5 µm, 10’’
➄ MaxiTower plus RO-EDI-System, 50 – 0 l/h
MixMulti XL
Technical specifications Mix Multi XL
Max. flow rate: 1.5 m³/h
Volume of active content: 5 litres
Hardness capacity °dHxm³: 80
Salt stock: 75 kg
Operating pressure,
min./max.: 1. – 6 bar
Water temperature max.: 0 °C
Control: Time controlled
Dimensions: 10 x 5 0 x 1150
(width/depth/height)
Cat. No.: 06.1252
Feedwater specifications:
Conductivity: < 000 µS/cm
Hardness: < 800 ppm
Silt Density Index (SDI): 0
➅ Storage tank, 00 l
➆ Automatic level control with
volume display
➇ CO Absorber with 0. µm sterile filter
➈ Booster pump
7