TKA MaxiTower plus - TS Labor
TKA MaxiTower plus - TS Labor
TKA MaxiTower plus - TS Labor
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
<strong>TKA</strong> <strong>MaxiTower</strong> <strong>plus</strong><br />
Pure water<br />
State-of-the-art<br />
Technology.<br />
WATER<br />
PURIFICATION<br />
SYSTEMS
Pure water technology at its finest.<br />
High purity<br />
water ASTM II<br />
15 – 10 MΩ×cm.<br />
Exceeds the<br />
standards ASTM II,<br />
CAP, CLSI Typ 1,<br />
ISO 3696 and<br />
Aqua Purificata.<br />
The complete system in a compact<br />
shape. For daily needs of 500 to<br />
5000 litres.<br />
For example, for<br />
• Rinsing lab glassware<br />
• Feeding autoclaves, clinical ana-<br />
lysers and ultrapure water systems<br />
• Preparing and diluting<br />
– buffers<br />
– reagents<br />
– tissue culture media<br />
• Sample preparation for analytical<br />
methods<br />
• General biotechnology applications
<strong>TKA</strong> <strong>MaxiTower</strong> <strong>plus</strong>.<br />
Benefits in<br />
brief!<br />
Innovative technology!<br />
• Pure water preparation via a highperformance<br />
reverse osmosis<br />
module <strong>plus</strong> electrodeionisation,<br />
EDI in short.<br />
• Four systems, for 50–80, 1 0, 150 or<br />
0 l/h<br />
• Compact, good-looking, rollermount<br />
mobility<br />
Water ready for drawing when needed!<br />
• Water is supplied directly from the<br />
tank to analysers, autoclaves, washing<br />
machines, pure water systems<br />
Dependable operation!<br />
• Microprocessor control for automatic<br />
running<br />
• Permanent monitoring of all important<br />
parameters<br />
• Automatic return to operating mode<br />
after each and every usage process<br />
• Potential free contact for fault<br />
messages<br />
UV<br />
photooxidation<br />
(opt.)<br />
Recirculation<br />
module<br />
PurMaxx<br />
Conductivity<br />
cell<br />
Recirculation<br />
Tank<br />
Recirculation<br />
pump<br />
High purity<br />
water<br />
outlet<br />
Water of constant high quality!<br />
• Automatic circulation of water in<br />
the tank through an additional<br />
PurMaxx pure water module <strong>plus</strong><br />
free cycle setting<br />
• Ensures maintenance of the<br />
permanently low conductivity even<br />
for long periods of inactivity<br />
Assured highest hygiene!<br />
• Optional UV lamp in the tank<br />
recirculation system reduces<br />
organic constituents – optional<br />
sterile filter for tank water outlet<br />
A flexible future!<br />
• <strong>MaxiTower</strong> Plus can grow to<br />
match increased requirements.<br />
The performance can be upgraded<br />
from a flow rate of 80 to 0,<br />
for example, by a simple module<br />
enlargement. And it is just as easy<br />
to replace a small tank by a larger<br />
one.
Comfortable operation!<br />
Clear information!<br />
The large -line display is code<br />
protected and offers a choice of<br />
three languages, English, German or<br />
French. It is illuminated , easy to<br />
read and provides information on:<br />
• the temperature in °C<br />
• the temperature-compensated conductivity<br />
of water coming from the<br />
osmosis/high purity polisher module<br />
• the operating mode status, such as<br />
production, stand-by, rinsing<br />
• the tank content in %<br />
• the RS interface<br />
• the fault memory function<br />
Easy to work with!<br />
Just six control keys allow for rapid<br />
operational readiness<br />
• Start/stop of high purity water<br />
production<br />
• Start/stop of other operating<br />
sequencies and service procedures<br />
• Limiting values settings, conductivity<br />
RO water and high purity water<br />
• Recirculation interval<br />
• On/off of the optional UV lamp<br />
Tank level control indicator!<br />
Continual monitoring of the tank<br />
volume in %.<br />
Designed for Qualification!<br />
<strong>TKA</strong> <strong>MaxiTower</strong> <strong>plus</strong> has been<br />
designed to fulfill GLP requirements.<br />
Recording and traceability of data<br />
are ensured via an RS interface<br />
and a <strong>TKA</strong> printer. A cell constant of<br />
0.01 cm -1 guarantees highly qualified<br />
and precise measurement of the<br />
conductivity, which is compensated<br />
to an accuracy of ± 0.1 °C (acc. to USP<br />
) even with only minimal temperature<br />
change.<br />
A good view!<br />
Just set the tiltable display/keypad<br />
unit to the best viewing/operating<br />
position for you.
<strong>TKA</strong> <strong>MaxiTower</strong> <strong>plus</strong>. Water purification with High-Tech.<br />
Combination of<br />
electrodialysis and<br />
ion exchange<br />
processes<br />
Electrodeionisation, EDI in brief, unites<br />
two proven technologies for producing<br />
ultrapure water: Electrodialysis and<br />
ion exchange (IEX). The great technical<br />
thing about this: In contrast to conventional<br />
ion exchange, in which resins<br />
must be chemically regenerated, EDI<br />
utilizes an electric current for continual<br />
resin regeneration.<br />
Cation<br />
exchanger<br />
membrane<br />
Anion resin<br />
Cation resin<br />
Diagrammatic form<br />
Anion<br />
exchanger<br />
membrane<br />
Concentrate Concentrate<br />
Technologies that keep you one jump ahead!<br />
• Constant high efficiency of the ion > gives you outstanding ultrapure water<br />
exchanger layer bed quality<br />
• No regeneration chemicals > important for the environmentl<br />
• No exchange of exhausted resins > saves you costs<br />
• High purity water when you need it > no wasted time<br />
anode<br />
(+)<br />
Cation-permeable<br />
membrane<br />
Na +<br />
Na +<br />
H +<br />
OH -<br />
High purity water < 0,1µS/cm<br />
concentrate<br />
electrolyte concentrate<br />
feedwater<br />
feedwater<br />
electrolyte<br />
How EDI works<br />
Several layers of ion selective membranes<br />
are situated between an anode<br />
and a cathode. Layered ion exchanger<br />
resin beds and concentrate chambers<br />
are alternately positioned between<br />
them.<br />
On applying an electric voltage, water<br />
(H 0) is split into H + and OH – in the cell.<br />
The H + and Na + cations can migrate<br />
through the cation permeable membranes,<br />
anions through the anion permeable<br />
membranes.<br />
The ions migrate in the direction of<br />
the applied voltage, i.e. anions to the<br />
positive pole (anode), cations to the<br />
CI -<br />
CI -<br />
Na +<br />
H +<br />
Na +<br />
OH -<br />
CI -<br />
concentrate<br />
Feedwater<br />
Permeate from RO-system, – 0 µS/cm<br />
H +<br />
Na +<br />
CI -<br />
H +<br />
OH- CI -<br />
concentrate<br />
cathode<br />
(–)<br />
Anion-permeable<br />
membrane<br />
negative pole (cathode). The water<br />
ions H + and OH – that migrate through<br />
an ion exchange chamber displace salt<br />
ions retained by the ion exchanger resins<br />
and so continually regenerate the<br />
resins.<br />
The salt ions migrate through the<br />
appropriate ion selective membranes<br />
into the concentrate chambers and are<br />
flushed out of them by water. As all<br />
concentration chambers are flushed<br />
through one after the other, excess H +<br />
and OH – ions can again combine to<br />
form H 0.<br />
5
6<br />
Flow chart <strong>TKA</strong> <strong>MaxiTower</strong> <strong>plus</strong><br />
System components <strong>TKA</strong> <strong>MaxiTower</strong> <strong>plus</strong><br />
Type <strong>MaxiTower</strong> 80 <strong>MaxiTower</strong> 120 <strong>MaxiTower</strong> 150 <strong>MaxiTower</strong> 230<br />
Flow rate at 15 °C, l/h: 50 – 80 1 0 150 0<br />
Typical conductivity in µS/cm*: 0.067 – 0.10<br />
Typical resistivity (MΩxcm at 5° C)*: 15 – 10<br />
Bacterial level (CFU/ml) with sterile filter: < 1<br />
Particles (> 0. µm/ml) with sterile filter: < 1<br />
Silicate removal, %: > 99.9<br />
TOC Value, ppb**: < 0<br />
Operating pressure, bar, min/max: /6<br />
Supply voltage: 0 V/50Hz<br />
Power consumption, kW: 0. 5<br />
Connector size: d8 / R / “<br />
Ambient temperature: + °C – + 5 °C<br />
Dimensions, W x D x H, mm: 560 x 660 x 1 80<br />
Weight, kg: 1 0 1 0 1 0 150<br />
Cat. no.: 07.5080 EDI 07.5120 EDI 07.5150 EDI 07.5230 EDI<br />
* with < 0 ppm CO in the feedwater ** depending on feedwater<br />
Accessories<br />
06.5201 Activated carbon cartridge with prefilter, 5 µm, 10" ***<br />
06.5101 Prefilter 1 µm, 10" ***<br />
06.5126 Prefilter 0.5 µm, 10" ***<br />
06.5555 Sterile filter 0. µm, 10"<br />
26.0017 UV lamp, recirculation<br />
*** included in the delivery scope<br />
<strong>TKA</strong> Feedwater requirements for<br />
<strong>MaxiTower</strong> <strong>plus</strong> Systems:<br />
Source: Potable water,<br />
max. 1500 µS/cm<br />
Prefiltration: 5 µm + activated<br />
carbon softener<br />
Free chlorine < 0.1 mg/litre<br />
concentration:<br />
Manganese content: < 0.05 mg/litre<br />
Iron content: < 0.05 mg/litre<br />
Colloidal index: <<br />
pH-Range: – 11
Pure water on<br />
call high purity!<br />
<strong>TKA</strong> Storage tanks<br />
Quality throughout!<br />
• Tank material: pure water resistant,<br />
opaque to light and food-safe polypropylene<br />
• The recirculation through <strong>MaxiTower</strong><br />
<strong>plus</strong> maintains the permanently low<br />
conductivity and acts against bacterial<br />
growth during standstills<br />
• Automatic level control with water<br />
volume indicator shown on the<br />
<strong>MaxiTower</strong> display<br />
• Large 00 mm service opening and<br />
conical bottom (optional) to allow complete<br />
and efficient cleaning and rinsing<br />
• Optional sterile overflow, CO<br />
absorber and sterile filter<br />
Choice of 5 sizes.<br />
100 Litres plain bottom conical bottom<br />
Height, mm 680 800<br />
Ø, mm 60 60<br />
Cat. No.: 06.5100 06.5100-S<br />
200 Litres plain bottom conical bottom<br />
Height, mm 8 0 800<br />
Ø, mm 560 650<br />
Cat. No.: 06.5200 06.5200-S<br />
300 Litres plain bottom conical bottom<br />
Height, mm 8 0 800<br />
Ø, mm 690 790<br />
Cat. No.: 06.5300 06.5300-S<br />
400 Litres plain bottom conical bottom<br />
Height, mm 1050 1 90<br />
Ø, mm 760 670<br />
Cat. No.: 06.5400 06.5400-S<br />
500 Litres plain bottom conical bottom<br />
Height, mm 1100 1 90<br />
Ø, mm 780 750<br />
Cat. No.: 06.5500 06.5500-S<br />
Further tank sizes on request.<br />
Storage tank, 100 – 500 l<br />
The best water<br />
pretreatment!<br />
<strong>TKA</strong> MixMulti XL<br />
This system can be used even when the<br />
feedwater condition is very difficult.<br />
It not only softens the water but also<br />
efficiently cleans it and so protects the<br />
osmosis membranes from blockage. In<br />
addition to calcium and magnesium,<br />
it also removes iron and manganese, a<br />
great variety of suspended matter and<br />
organic material. The secret lies in the<br />
combination of multiple adsorption<br />
stages, from porous polymeric adsorbers<br />
to ion exchangers.<br />
MixMulti can be regenerated exactly<br />
as a normal water softener, i.e. with a<br />
conventional saturated sodium chloride<br />
solution (8–10%).<br />
built in<br />
cabinet<br />
➀ MixMulti XL Pretreatment unit<br />
➁ Prefilter, 5 µm + activated carbon, 10’’<br />
➂ Prefilter, 1 µm, 10’’<br />
➃ Pure water filter, 0.5 µm, 10’’<br />
➄ <strong>MaxiTower</strong> <strong>plus</strong> RO-EDI-System, 50 – 0 l/h<br />
MixMulti XL<br />
Technical specifications Mix Multi XL<br />
Max. flow rate: 1.5 m³/h<br />
Volume of active content: 5 litres<br />
Hardness capacity °dHxm³: 80<br />
Salt stock: 75 kg<br />
Operating pressure,<br />
min./max.: 1. – 6 bar<br />
Water temperature max.: 0 °C<br />
Control: Time controlled<br />
Dimensions: 10 x 5 0 x 1150<br />
(width/depth/height)<br />
Cat. No.: 06.1252<br />
Feedwater specifications:<br />
Conductivity: < 000 µS/cm<br />
Hardness: < 800 ppm<br />
Silt Density Index (SDI): 0<br />
➅ Storage tank, 00 l<br />
➆ Automatic level control with<br />
volume display<br />
➇ CO Absorber with 0. µm sterile filter<br />
➈ Booster pump<br />
7
The purifying systems for laboratory<br />
water introduced in this brochure are<br />
only a part of the total <strong>TKA</strong> water<br />
purification systems line.<br />
Your authorised dealer:<br />
<strong>TKA</strong> Water Purification Systems<br />
Among others, <strong>TKA</strong> offers highest<br />
quality reverse osmosis systems with<br />
state of the art spiral membranes, both<br />
alone and in combination with <strong>TKA</strong><br />
electrodeionisation. For the smallest to<br />
the largest need of high purity water,<br />
for the daily supply of water to autoclaves<br />
up to the production of Aqua<br />
Purificata.<br />
We are gladly ready to supply further<br />
information, to advise you on the most<br />
fitting pretreatment or to recommend<br />
the optimal combination of systems for<br />
the performance required. Always with<br />
economy in mind and under consideration<br />
of the water quality you need. As<br />
little as possible, as much as necessary!<br />
It is our aim to offer you water purification<br />
systems that prepare water of<br />
various specified qualities as reliably,<br />
practically and cost-favourably as possible.<br />
Our standard systems are correspondingly<br />
designed. Should none<br />
of these exactly fit your requirements,<br />
however, simply contact us! We see<br />
each and every problem as one that<br />
needs to be solved and will find a suitable<br />
and economic solution even when<br />
the conditions are difficult.<br />
<strong>TKA</strong> Wasseraufbereitungssysteme GmbH<br />
Stockland<br />
56 1 Niederelbert / Germany<br />
Telephone: + 9 (0) 6 0 /10 69 9-0<br />
Telefax: + 9 (0) 6 0 /10 69 9-50<br />
e-mail: info@tka.de<br />
www.tka.de<br />
Rights reserved for changes and printing errors. Printed in EC. MT+01en Status . 010 000 Go