DC 6130 / P / 6135 / 6230 / 6235 - TA Triumph-Adler GmbH

Duplex Sending
Select the type and binding of original depending on the original.
The table below lists the binding directions for each original type.
Original Type Binding Binding
1-sided Sheet Original 1-sided — —
2-sided Sheet Original 2-sided Binding Left/Right,
Binding Top
5-6
Sending Functions
Use the procedure below to select the original type and binding direction when sending scanned originals.
Function Menu: a b
*********************
1 Color Selection T
2 Original Size T
3 Original Image T
[ Exit ]
Duplex: a b
*********************
1 *1-sided
2 2-sided
1 Press the Send key.
2 Place the originals on the document processor.
3 Press the Function Menu key. Function Menu appears.
4 Press the or key to select [Duplex].
5 Press the OK key. Duplex appears.
6 Press the or key to select [1-sided] or [2-sided].
If you select [2-sided], press [Detail] (the Right Select
key), select the binding edge and press the OK key, and
then select the original setting orientation on the next
screen.
7 Press the OK key.
Top Edge Top,
Top Edge Left
Completed. is displayed and the screen returns to the
basic screen for sending.
8 Specify the destination, and press the Start key to start
sending.
NOTE: Press the Reset key to reset the settings selected in
Function Menu.