Caution - TA Triumph-Adler

Basic Operation
Split Mode
3-14
Use Split mode to create single-sided copies from two-sided originals or originals with facing pages
(such as books or magazines) as follows.
Two-sided to One-sided
Copies each side of a two-sided original onto two individual sheets.
NOTE: This operation requires the optional document processor.
The following binding options are available.
• Open from Left/Right: The back side and front side of the original are copied with the same
orientation.
• Open from top: The back side is copied rotated 180 ° from the orientation of the front side.
Book to One-sided
Copies each page of originals with facing pages (such as books or magazines) onto two individual
sheets.
The following binding options are available.
• Open from left: Originals with facing pages are copied from left to right.
• Open from right: Originals with facing pages are copied from right to left.
NOTE: Original sizes for split mode copy mode are limited to 11 × 17", 8 1/2 × 11", A3, B4, A4R, B5R
and 8K. Paper sizes are limited to 11 × 8 1/2", A4, B5 and 16K. Change the paper size to fit the
original to that size.
Follow the steps as below to use Split mode.
1 Press [Function].
1
2
1
Original Copy
2
Original Copy
1
11×8½"
Plain
11×17"
Color
11×8½"
Plain
11×8½"
Plain
Basic
1
2
Ready to copy. ( Full-Color )
MP tray
Plain
User choice
2
APS Auto %
100%
Reduce
Exposure
/Enlarge Mode
Function
Auto
Exposure
Color func.
Paper Size
11×8
100%
Staple Off
Staple
Left Top
Staple
Program