Caution - TA Triumph-Adler

6 Destination Registration
Select the item to be configured using
[] or [] and press [Change #]. The
settings configuration screen is
displayed. Follow the screen instructions
to make the changes. When done, press
[Complete entering] to save the
destination.
7 Group Registration
Press [Information], press [] or [] to
select the item to be configured and
press [Change #]. The settings
configuration screen is displayed. Follow
the screen instructions to make the
changes.
Press [Destination] and press [Add
dest.]. The destination registration
screen is displayed. Press [] or [] to
select the destination to be added and
press [Add].
When done, press [Complete entering]
to save the group.
Preparation for Usage
NOTE: Perform destination registration before group registration. Destinations will not be shown in
the list until destinations have been registered.
Group registration is not possible for Scan to FTP.
Configuring Date/Time and Time Difference
Configure the necessary regional information for the e-mail sending functionality.
The time the e-mail was sent from the scanner will be recorded as the transmission time in the
e-mail header. Follow the steps below to set the date, current time and time difference from GMT
(Greenwich Mean Time).
1 Press the System Menu/Counter key.
New Dest. Register
Registra.list:Scan to PC address book
Setting item
Setting value
IP address or host name (Not specified)
Name to display
(Not specified)
Save folder No.
(Not specified)
Information
Register new group
Registra.list:Scan to PC address book
Setting item
Setting value
Name to display
(Not specified)
Password
(Not specified)
Information Destination
Register new group
Registra.list:Scan to PC address book
Display name
Destination
UserA
10.111.111.112
UserB
10.111.111.113
UserC
10.111.111.114
Information
Destination
Change #
Change #
Delete
Add
dest.
# of re
# of re
# of re
2-37