Caution - TA Triumph-Adler

Preparation for Usage
2-24
11 Press [] or [] to select IP Address
and press [Change #].
12 Enter the IP address using the numeric
keys. Input the address for the 3 digits
displayed in reverse black and white and
press the # key.
Verify the 3 digits entered # key.
13 Input the address for the next 3 digits displayed in reverse black and white and press the # key.
To correct an address entry, press the # key to select the 3 digit address you would like to correct
and reenter the address using the numeric keys.
14 After inputting the rest of the address in the same manner, press [Close]. The display returns to the
TCP/IP screen.
Press [Back] to delete the entered address and set the previous address.
15 Press [] or [] to select Subnet Mask and press [Change #].
16 Set the address in the same manner as Steps 12 - 14 to set the IP address.
17 Press [] or [] to select Gateway and press [Change #].
18 Set the address in the same manner as Steps 12-14 to set the IP address.
19 Press [Close] after all settings are complete.
20 Press [Close].
21 Press [Close]. The display returns to Printer mode.
Included Printer Utilities
This product includes the following printer utilities Install them as necessary. For details, refer to the
manual included with each utility.
• Network Tool for Clients
• Direct Printing
• Print Monitor
• Port Setup
• Quick Setup
Interface - Network
IP Address
Confirm per 3 lines pressing # key.
Back
Setting Item Value
DHCP On
BOOTP On
IP Address 0. 0. 0. 0
Subnet Mask 0. 0. 0. 0
Gateway 0. 0. 0. 0
.10
.0 .0 .0
Printer menu- Interface - Network - TCP/IP
(with #key)
Close
Change #
Back